Datacone Engineers Pvt. Ltd.

Ganapati Peth, Sangli, Maharashtra

Range of Experiments to be Carried Out
Heater Assembly
Brass Vertical cylinder
Cylinder enclosure with stand
Cylinder holding assembly. S. Set of thermocouples

This apparatus is made as per IP 34, ASTMD-93 and IS 1448 (Part I) 1270 (P.21) and IS 1209-1953 method B. Used for finding out Flash Point above 70 °C and below 300° C. The Instrument having Oil Test Jet/Gas Test Jet Flame Device, stirrer with flexible shaft. The Assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated Handle and locking arrangement near Cup flange. The assemble is kept on round shape electric heater with Seperate temp.regulator. Suitable for operation on 220 Volts 50 cycles AC Circuits P. M. Flash Point App. Elect. With energy Regulator, Geared Motor Stirrer (120 R.P.M.) Oil Test Jet

California bearing ratio apparatus Important aspect in manufacturing the educational equipments is, we have to achieve the 100% results in laboratories only. If we do not achieve in laboratory then where is the place on earth where we can get these results.

Range of Experiments to be Carried Out
To determine the Radiation Stefan Boltzman Constant
Observe the radiation phenomena
To Plot temperature increses of test disk with respect to time
The experiments can be conducted at various values of input (Temperature) & calculation can be made accordingly

Range of Experiments to be Carried Out
To determine emissivity of test plate
To Observe & calculate The radiant energy per unit time area from the surface of the test body at various temperature
Observe the radiation phenomena
The experiments can be conducted at various values of input & calculation can be made accordingly

We are the main supplier of this product.

Range of Experiments to be Carried Out
To determine total thermal resistance & thermal conductivity of lagged pipe
To plot temperature gradient across the lagged material
The experiments can be conducted at various values of input & calculation can be made accordingly
To plot Heat input (supplied) Vs thermal conductivity in lagged pipe

Range of Experiments to be Carried Out
Observe and see the condensation phenomena
Calculate the Inside, Outside & Overall heat transfer coefficient during condensation
To calculate Pr, Re & Nu number in drop & film condensation
The experiments can be conducted at various

Heat Transfer From Pin - Fin Apparatus To study the temperature distribution along the length of a pin fin in natural & forced convection.Calculate the value of m & obtain the temperature at various locations along the length of the fin in natural & forced conviction.Calculate the values of heat transfer rate from the fin & the fin effectiveness in natural & forced conviction.The experiments can be conducted at various values of input & calculation can be made accordingly.

Range of Experiments to be Carried Out
To determine the critical heat flux at different bath temperatures
To plot the graph of Critical Heat Flux with rescpective Bath Temperature

Range of Experiments to be Carried OutObserve the Temperature separation phenomenon of vortex tubeThe experiments can be conducted at various of input pressure

Range of Experiments to be Carried Out
To study the temperature distribution along the length of a pin fin in natural & forced convection
To calculate Gr, Pr & Nu number in natural conviction
Calculate Re, Pr & Nu number in forced conviction
Calculate the value of m & obtain the temperature at various locations along the length of the fin in natural & forced conviction
Calculate the values of heat transfer rate from the fin & the fin effectiveness in natural & forced conviction
The experiments can be conducted at various values of input & calculation can be made accordingly

SLUMP TEST APPARATUS FULLY ADVANCED AUTOMATIC COMPRESSON TESTING MACHINE : FACFACTM. Important aspect in manufacturing the educational equipments is, we have to achieve the 100% results in laboratories only. If we do not achieve in laboratory then where is the place on earth where we can get these results.

Aggregate crushing value apparatus AGGREGATE IMPACT TESTER WITH BLOW COUNTER. RIFFLE SAMPLE DIVIDER. PUG MILL FOR GRINDING LIME MORTAR.

Air permeability apparatus Important aspect in manufacturing the educational equipments is, we have to achieve the 100% results in laboratories only. If we do not achieve in laboratory then where is the place on earth where we can get these results.