Samoel Energy Solutions LLP

Nanpura, Surat, Gujarat

Brass Female PPR inserts CPVC inserts Which are mostly use for Brass Female Inserts for pipe fittings,

Brass Female CPVC inserts are Fitted with Stainless Steel Ferrule & EPDM Rubber Ring Brass Female Inserts for pipe fittings, Brass Female ppr inserts for pipe fittings

We have wide range of Brass Male Inserts with different outer surface like knurling, diamond & crossed knurling for better girp, in plastic moulding, brass inserts for ppr fittings, brass inserts for male inserts, brass inserts for female inserts

Solar water heating is now a mature technology. Wide spread utilization of solar water heaters can reduce a significant portion of the conventional energy being used for heating water in homes, factories &other commercial & institutional establishments. Internationally the market for solar water heaters has expanded significantly during the last decade. It is estimated that over 107 million m²of collector area has so far been installed worldwide for heating water. In the country, the collector area so far installed for water heating is over 1 million m². Ministry has plans to add another 2 million m²in next two years.

• Generallynon pressurized systems are working up to 0.8 Kg / Cm²
• Solar water heaters (SWHs) of 100-500 liters capacity are suited for domestic application.
• Larger systems can be used in restaurants, canteens, guest houses, hotels, hospitals etc.
• The iSolarprosavesapproximately1, 600 electrical unitsin a year if you compare with electrical boiler under normal sunshine conditions.
• This system requires very little maintenance &is completely safe for your family as there are no accidents due to Electric Shock and easy to operate for your dear ones.
• Yes this system is suitable for hard water conditions &comes with 5 year Warrantyfor the inner tank.

Advantages of ETC Tube

• Higher temperature than FPC System
• Get quick result in rainy & cloudy atmosphere
• No need to service for long time
• Easy to get temperature in hard water
• ETC is widely accepted in cold countries
• Cheaper than FPC system
• No clogging/ chocking

Features

• High quality PUF insulation for maintaining high temperature of water inside the tank
• Compact and light weight water heater
• Easy to install, operate and maintain
• Works efficiently with hard water
• Power coated MS stand
• Safe and environment friendly

Used for the purpose of making shafts, valve components and automatic door components, the offered Brass Male Female Bush manufactured by us is highly asked for the in the market.

A solar PV power plant converts sunlight into electricity. It does so withoutany moving parts (unless it has a tracking system) and without generatingeither noise or pollution. A solar PV system can be installed at any un-shadedlocation such as on rooftops of buildings, car parking sheds, empty land, oreven on top of canals and roads. Typical system sizes range from 240 wattsto 100 MW. There is very little difference in the technical design between

small kW-sized plants (typically de-centralized, off-grid) and large, MW-sizedplants (typically centralized, grid-connected). Solar plants can easily be scaledusing independent, modular components such as PV modules, inverters andbatteries. The rooftops of buildings would be ideal for the installation of solar PV in City A typical rooftop solar

PV system for a household is between 1-10kW. For larger buildings, such asoffices or malls, it can reach 100 kW or more. Given Gujarats average irradiationof 5-5.5 kWh/m2/day, a kW of installed solar PV can generate 4-4.5 kWh ofpower during daylight hours, equivalent to the amount of power needed for arefrigerator to run for a day.A solar PV system consists of the following key components

1. Solar PV array (group of modules)
2. Solar inverter
3. Battery
4. Interconnecting devices (junction box, cables, distribution box)

The PV array consists of solar modules interconnected with each other. Themodules convert the energy from unlight, are held on structures made ofgalvanized iron, mild steel or aluminum and are inclined at a horizontal tilt,

facing either south or east-west.

Types of rooftop solar PV systems

Rooftop solar PV systems are of 3 types:

1. Grid-tied These rooftop systems are primarily designed to supply the generated power to the grid and also power the load. These systems will NOT generate power during a power failure as the inverter shuts down the system to stop sending power into the grid and avoids the risk of electrocuting utility personnel who are working to repair the grid
2. Grid-interactive This system works in conjunction with either a battery backup or diesel generator to support the load even during a power failure.
3. Off-grid This system does not work with the grid and is designed to work only with a battery backup or diesel generator in off-grid applications

The difference between the systems lies in the kind of inverter used, and the inclusion of batteries. As various vendors use different terminology for these systems we urge you to verify the functions of the offered system rather than going by the name alone

Component cost of rooftop PV systems

A rooftop solar PV system costs approximately Rs. 1, 00, 000 per kWp (kilowatt peak) including installation charges but without batteries and without considering incentives

Rooftop and high efficiency solar modules

High efficiency solar panels are coming in to their own at the moment. Many of the most efficient solar modules have a copper foundation, which makes them especially resistant to corrosion. Solar cell manufacturers are also swapping the weak connections in their cells with sturdier, thicker connectors. In the past, with these weak connections, if just one connection failed then that would mean that the whole cell was out of action.Present day solar cell connectors are much more resistant to failure, and also the loss of one connector does not have such a drastic effect on the rest of the cell. These new connectors are also designed to expand and contract in line with changes in temperature and sunlight levels throughout the day.

Solar street lighting system is ideal light for illuminating Highways, Village Road, Street in town, Garden, Industry premises. No grid connection is required for illuminating solar street lights; it reduces the cost of cable, pole extension and losses in the cable. It provides light continuously at night time except during natural calamities.

Features

• Stand alone system.
• Adequate protections provided.
• Highly efficient inverter and charge regulator.
• Automatic On/Off operation.
• Ingredients Solar PV module, Battery, Luminary with LEDs, Pole, Battery Box, SPV module mounting structure, cable and Hardware set.
• 6 hours to 12 hours of operation depends on model.
• New Generation Lighting Solutions- LED lighting.

Backed by our vast industrial expertise, we make available Brass Flexible Adapters Fittings to our valuable customers. The offered adapters are highly regarded for their easy installation.

Known for its impeccable and diverse usage in the plumbing industry, the offered Brass Male Female Bush is one of the best in its league. In addition, the bush is priced quite reasonably.

We are leading supplier of huge range of Brass Bolts.