Cyclo Instruments Pvt. Ltd.

MIDC, Satara, Maharashtra

We are Maharashtra (India)-based Manufacturer and Supplier of Air Gauges. We have been catering to the requirements of the customers from all over the world by offering high grade and flawless range of Air Gauges at the most affordable prices. The offered Air Gauges are precisely manufactured and tested using sophisticated technology. The Air Gauges we deal in are in compliance with the International Standards and meet the customers’ satisfaction level.

Details :

• Air plug & air rings Cyclo Instruments manufactures air plugs and air rings compatible to various air gauging systems used in the country.
• Air plugs in the range of 6 to 130mm diameter and air rings in the range of 10 to 60mm diameter; are designed to inspect internal and external diameters respectively; where the work tolerances are of the order of +- 0.030 mm or closer.
• Made of tool steel; their very fast response time; sensing accuracy and accessibility have made them favorite inspection tools in mass production; covering industries such as automobiles; refrigeration; textile; bearing and electric motor.
• Very useful inspection tools to determine form variations; they provide first hand information of the machine error & the error introduced in tool setting.
• Non contact gauging makes them very long lasting and thereby compensating for the initial costs.

 
Salient Features :

• Made from High Alloy Steel
• Tooling could be made to suit different measuring systems.
• Multijet Air plugs for simultaneous Measurements

• Mfg Range :
  • For Air Plug : 8mm to 100mm
  • For Air Rings : 8mm to 80mm

We have been catering to the ever-evolving demands of the customers by offering high grade and excellent Reversible Plain Plug Gauges. Highly appreciated for the durable, precisely constructed, flawless Reversible Plain Plug Gauges, we have established as a renowned Manufacturer and Supplier of the same. We are capable of making voluminous orders as we have excellent storage and transportation facilities.

Details :

• We are offering reversible plain plug gauges.
• Cyclo Instruments manufactures plain plug gauges in the range of 0.5 to 12 mm; in reversible gauge element type design.
• The gauge elements are fastened by collet & nut mechanism to the opposite ends of a handle.
• When after use the gauge element wears off; the same could be unlocked & reversed in position (inside edge out) to put in use the unused intact inside edge.
• This enables the user to get double life from one single gauge thereby saving on the gauge costs.
• The gauge elements (pins) are 40mm in length below nominal diameter of 1.5mm & are in H.S.S.
• The gauge elements (pins) beyond 1.5mm are made from SAE 52100 steel & are of 50mm length.
• All pins are full cylinders over their entire length. 10mm of the length of the pin is sufficient for holding the gauge pin into the collet.
• Gauge manufacturing tolerances are as per i.s. 3455-1971. very suitable for deep hole inspection; & with the advantage of getting double life due to reversal of the pin end after wearing off; these type of gauges are in good demand from watch; electronic; hydraulic; jewellery; dash board instruments industry & general engineering industry.

We are listed among the most reliable and genuine names in the domain offering only qualitative and certified OD Setting Master. We are prominent Manufacturer and Supplier of OD Setting Master that are obtainable from us at market-leading prices. With our excellent testing facilities we make sure that the OD Setting Masters are flawless and meet the customers’ satisfaction level.

Details :

• Cyclo instruments manufactures outside diameter setting masters in the range of 5 mm to 280 mm.; as per i.s. 4349-1987; to be used for setting the dials of comparators such as comparator stands; dial snaps, air snaps & alikes.
• Made from alloy steel; these masters are subzero treated @ -80^oc after hardening to arrest dimensional growth in hardened steels.
• Form variation of the diameter is controlled within it0 grade of tolerance.
• Ground & lapped having hardness of 60± 2 hrc; these masters are calibrated under standards room conditions with reference standards traceable to national standards of length through NPL New Delhi.
• Each master is supplied with individual calibration certificate with actual size of the master marked on it by electro etching.
• There are many advantages of using outside diameter solid one piece masters instead of using slip gauge combinations.
• It does away with the use of costly precision slip gauge box; reduces the incidences of committing errors in building a slip combination leading to heavy losses in the production line; facilitates the measurement of outside diameters of splined shafts with the help of between center attachments.

Salient features :

• For Setting External diameter measuring instruments
• Made of Alloy Steel and hardened to 60 HRC.
• Subzero treated for dimensional stability.
• Calibrated at +20^oC under Standard’s Room Conditions.
• Dimensions traceable to NPL, New Delhi.
• Mfg. Reference - I.S. 4349-1987.
• Manufacturing Range:- From 5mm up to 330mm.