Walk In Stability Chamber

2.20 Lakh /Piece Get Latest Price

Min. Order (MOQ) 1 Piece
Automatic Grade Automatic
Driven Type Electric
Model CBh4k
Temperature Range 20 to 60 degree C
Accuracy ± 0.2 degree C
Uniformity ± 1degree C
Humidity Range 40 to 90% RH

Equipment : PLC based Humidity chamber (Walkin type) (Also available in controller based )
Control system : Allen Bradley PLC controlling temperature and humidity. Also connected to IOT device to access chamber via mobile
Humidity system : A steam generation tank followed by a reservoir water tank generates steam and make a non-condensing steam injection system to the chamber. A standby humidity system will be provided for continuous function during fault
Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser. A standby refrigeration system will be provided for continuous function during fault
Air circulation : To get an uniform temperature & humidity a centrifugal blower connected to a motor will blow the steam & air from up to down, controlled by PLC
Heating system : SS. U shaped nichrome wire
Insulation : 80 mm sheet of PUF (Poly Urethane Foam)
Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
Illumination : LED light is provided for bright illumination and low power consumption
Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber
Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose
Sensors : Hygroflex sensor to sense both temperature and humidity
software : CDAQ complying 21 CFR part 11

Optional features

To avoid critical conditions and for ease of operation
Hooter
GSM technology
Extra trays
Extra sensor

Certification : ISO 9001:2015

Wireless access : A direct access to chamber is possible via mobile using IOT device

Sizes

Model	Capacity In litres	Internal Size in mm (WxDxH)	External Size in mm (WxDxH)	No. of trays
CBh4k	4000	1500x1500x1800	1670x2000x1980	16
CBh6k	6000	2000x1500x2000	2170x2000x2180	20
CBh8k	8000	2000x2000x2000	2170x2500x2180	20
CBh10k	10000	2000x2500x2000	2170x3000x2180	30
CBh15k	15000	2500x3000x2000	2670x3500x2180	40
CBh21k	21000	3000x2800x2500	3170x3300x2680	50

View Complete Details

Ask Latest Price & Details

Walk In Cold Chamber

2.20 Lakh /Piece Get Latest Price

Min. Order (MOQ) 1 Piece
Feature Easy To Use, High Demand
Voltage 220V
Finishing Polished
Automatic Grade Automatic
Power 1-3kw
Driven Type Electric
Model CBc4k
Temperature Range 2 to 8 Degree C
Accuracy ± 1.5 Degree C
Uniformity ± 2 degree C

Equipment : PLC based Cold chamber (Walkin type) (Also available in controller based )
Control system : Allen Bradley PLC controlling temperature and humidity. Also connected to IOT device to access chamber via mobile
Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser. A standby refrigeration system will be provided for continuous function during fault
Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the steam & air from up to down, controlled by PLC
Heating system : SS. U shaped nichrome wire
Insulation : 80 mm sheet of PUF (Poly Urethane Foam)
Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
Illumination : LED light is provided for bright illumination and low power consumption
Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber
Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose
Sensors : Hygroflex sensor to sense both temperature and humidity
Software : CDAQ complying 21 CFR part 11

Optional features

To avoid critical conditions and for ease of operation
Hooter
GSM technology
Extra trays
Extra sensor

Certification : ISO 9001:2015

Wireless access : A direct access to chamber is possible via mobile using IOT device

Sizes

Model	Capacity In litres	Internal Size in mm (WxDxH)	External Size in mm (WxDxH)	No. of trays
CBc4k	4000	1500x1500x1800	1670x2000x1980	16
CBc6k	6000	2000x1500x2000	2170x2000x2180	20
CBc8k	8000	2000x2000x2000	2170x2500x2180	20
CBc10k	10000	2000x2500x2000	2170x3000x2180	30
CBc15k	15000	2500x3000x2000	2670x3500x2180	40
CBc21k	21000	3000x2800x2500	3170x3300x2680	50S

View Complete Details

Ask Latest Price & Details

Walk IN BOD Incubator

2 Lakh /Piece Get Latest Price

Min. Order (MOQ) 1 Piece
Type Walk-In
Voltage 220V
Frequency 50Hz
Automation Grade Fully Automatic
Temperature Range 10 to 60 Degree C
Model CBbo4k
Accuracy ± 0.2 Degree C
Uniformity ± 1 Degree C

Equipment : PLC based BOD incubator (Walkin type) (Also available in controller based )
Control system : Allen Bradley PLC controlling temperature and humidity. Also connected to IOT device to access chamber via mobile
Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser. A standby refrigeration system will be provided for continuous function during fault
Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the steam & air from up to down, controlled by PLC
Heating system : SS. U shaped nichrome wire
Insulation : 80 mm sheet of PUF (Poly Urethane Foam)
Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
Illumination : LED light is provided for bright illumination and low power consumption
Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber
Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose
Sensors : Hygroflex sensor to sense both temperature and humidity
Software : CDAQ complying 21 CFR part 11

Optional features

To avoid critical conditions and for ease of operation
Hooter
GSM technology
Extra trays
Extra sensor

Certification : ISO 9001:2015

Wireless access : A direct access to chamber is possible via mobile using IOT device

Sizes

Model	Capacity In litres	Internal Size in mm (WxDxH)	External Size in mm (WxDxH)	No. of trays
CBbo4k	4000	1500x1500x1800	1670x2000x1980	16
CBbo6k	6000	2000x1500x2000	2170x2000x2180	20
CBbo8k	8000	2000x2000x2000	2170x2500x2180	20
CBbo10k	10000	2000x2500x2000	2170x3000x2180	30
CBbo15k	15000	2500x3000x2000	2670x3500x2180	40
CBbo21k	21000	3000x2800x2500	3170x3300x2680	50

View Complete Details

Ask Latest Price & Details

Standalone Stability Chamber

1 Lakh /Piece Get Latest Price

Min. Order (MOQ) 1 Piece
Voltage 380V
Model CBh1.25
Temperature Range 20 to 60 degree C
Humidity Range 40 to 90% RH
Accuracy ± 0.2 degree C
Uniformity ± 1 degree C
Usage Labs

Equipment : PLC based Humidity chamber (stand alone) (Also available in controller based )
Control system : Allen Bradley PLC controlling temperature and humidity. Also connected to IOT device to access chamber via mobile
Humidity system : A steam generation tank followed by a reservoir water tank generates steam and make a non-condensing steam injection system to the chamber
Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser
Air circulation : To get an uniform temperature & humidity a centrifugal blower connected to a motor will blow the steam & air from up to down, controlled by PLC
Heating system : SS. U shaped nichrome wire
Insulation : 80 mm sheet of PUF (Poly Urethane Foam)
Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
Illumination : LED light is provided for bright illumination and low power consumption
Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber
Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose
Sensors : Hygroflex sensor to sense both temperature and humidity
Software : CDAQ complying 21 CFR part 11

Optional features

To avoid critical conditions and for ease of operation
Standby refrigeration system
Standby humidity system
Hooter
GSM technology
Extra trays
Extra sensor

Certification : ISO 9001:2015

Wireless access : A direct access to chamber is possible via mobile using IOT device

Sizes

Model	Capacity In litres	Internal Size in mm (WxDxH)	External Size in mm (WxDxH)	No. of trays
CBh1.25	125	500x500x500	670x960x1150	2
CBh2	200	500x500x800	670x960x1450	2
CBh3	300	550x500x1100	720x960x1750	3
CBh4	400	650x550x1130	820x1010x1780	3
CBh6	600	750x700x1150	920x1160x1800	3
CBh8	800	850x830x1140	1020x1290x1790	4
CBh1k	1000	850x900x1350	1020x1360x2000	4
CBh2k	2000	15400x1000x1300	1710x1460x1950	8

View Complete Details

Ask Latest Price & Details

Photostability Chamber

95,000 /Piece Get Latest Price

Min. Order (MOQ) 1 Piece
Automatic Grade Automatic
Power 1-3kw
Model CBp1.25
Temperature Range 20 to 60 Degree C
Accuracy ± 0.2 Degree C
Uniformity ± 1 Degree C

Equipment : PLC based Photostability chamber (Also available in controller based )
Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile
Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser
Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC
Heating system : SS. U shaped nichrome wire
Insulation : 80 mm sheet of PUF (Poly Urethane Foam)
Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
Illumination : LED light is provided for bright illumination and low power consumption
Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber
Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose
Sensors : PT 100 sensor to sense temperature
Software : CDAQ complying 21 CFR part 11

Optional features :

To avoid critical conditions and for ease of operation
Standby refrigeration system
Hooter
GSM technology
Extra trays
Extra sensor

Certification : ISO 9001:2015

New Feature : A direct access to chamber is possible via mobile using IOT device

Illumination for photo : Fluorescent tubes for day light effect and U.V. tubes for ultra-violet rays

Stability test : in accordance to ICH guidelines requirement of lightning Energy

Wireless access : A direct access to chamber is possible via mobile using IOT device

Sizes

Model	Capacity In litres	Internal Size in mm (WxDxH)	External Size in mm (WxDxH)	No. of trays
CBp1.25	125	500x500x500	670x960x1150	2
CBp2	200	500x500x800	670x960x1450	2
CBp3	300	550x500x1100	720x960x1750	3
CBp4	400	650x550x1130	820x1010x1780	4
CBp6	600	750x700x1150	920x1160x1800	4

View Complete Details

Ask Latest Price & Details

Stand Alone Cold Chamber

1 Lakh - 10 Lakh /one Get Latest Price

Min. Order (MOQ) 1 unit
Voltage 220V
Power 1-3kw
Driven Type Electric
Phase Single Phase
Automation Grade Automatic
Temperature Range 2 to 8 Degree C
Accuracy ± 1.5 Degree C
Uniformity ± 2 Degree C

Equipment : PLC based Cold chamber (stand alone) (Also available in controller based )
Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile
Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser
Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC
Heating system : SS. U shaped nichrome wire
Insulation : 80 mm sheet of PUF (Poly Urethane Foam)
Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
Illumination : LED light is provided for bright illumination and low power consumption
Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber
Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose
Sensors : PT 100 sensor to sense both temperature
software : CDAQ complying 21 CFR part 11

Optional features

To avoid critical conditions and for ease of operation
Standby refrigeration system
Hooter
GSM technology
Extra trays
Extra sensors

Certification : ISO 9001:2015

Wireless access : A direct access to chamber is possible via mobile using IOT device

Sizes

Model	Capacity In litres	Internal Size in mm (WxDxH)	External Size in mm (WxDxH)	No. of trays
CBc1.25	125	500x500x500	670x960x1150	2
CBc2	200	500x500x800	670x960x1450	2
CBc3	300	550x500x1100	720x960x1750	3
CBc4	400	650x550x1130	820x1010x1780	3
CBc6	600	750x700x1150	920x1160x1800	3
CBc8	800	850x830x1140	1020x1290x1790	4
CBc1k	1000	850x900x1350	1020x1360x2000	4
CBc2k	2000	15400x1000x1300	1710x1460x1950	8

View Complete Details

Ask Latest Price & Details

Stand Alone Bod Incubator

90,000 /Piece Get Latest Price

Min. Order (MOQ) 1 Piece
Voltage 220V
Frequency 50Hz
Temperature Range 10 to 60 Degree C
Accuracy ± 0.2 Degree C
Uniformity ± 1 Degree C
Model CBbo1.25

Equipment : PLC based BOD Incubator (stand alone) (Also available in controller based )
Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile
Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser
Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC
Heating system : SS. U shaped nichrome wire
Insulation : 80 mm sheet of PUF (Poly Urethane Foam)
Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
Illumination : LED light is provided for bright illumination and low power consumption
Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber
Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose
Sensors : PT 100 sensor to sense temperature
Software : CDAQ complying 21 CFR part 11

Optional features

To avoid critical conditions and for ease of operation
Standby refrigeration system
Hooter
GSM technology
Extra trays
Extra sensor

Certification : ISO 9001:2015

Wireless access : A direct access to chamber is possible via mobile using IOT device

Sizes

Model	Capacity In litres	Internal Size in mm (WxDxH)	External Size in mm (WxDxH)	No. of trays
CBbo1.25	125	500x500x500	670x960x1150	2
CBbo2	200	500x500x800	670x960x1450	2
CBbo3	300	550x500x1100	720x960x1750	3
CBbo4	400	650x550x1130	820x1010x1780	3
CBbo6	600	750x700x1150	920x1160x1800	3
CBbo8	800	850x830x1140	1020x1290x1790	4
CBbo1k	1000	850x900x1350	1020x1360x2000	4
CBbo2k	2000	1540x1000x1300	1710x1460x1950	8

View Complete Details

Ask Latest Price & Details

Bacteriological Incubator

90,000 /Piece Get Latest Price

Min. Order (MOQ) 1 Piece
Material Mild Steel
Voltage 220V
Frequency 50Hz
Automation Grade Fully Automatic
Model CBba1.25
Temperature Range 10 Degree Above Ambient Temperature to 60 Degree C
Accuracy ± 0.2 Degree C
Uniformity ± 1 Degree C

Equipment : PLC based Bacteriological Incubator (Also available in controller based )
Control system : Allen Bradley PLC controlling temperature. Also connected to IOT device to access chamber via mobile
Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the air from up to down, controlled by PLC
Heating system : SS. U shaped nichrome wire
Insulation : 80 mm sheet of PUF (Poly Urethane Foam)
Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
Illumination : LED light is provided for bright illumination and low power consumption
Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber
Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose
Sensors : PT 100 sensor to sense temperature
Software : CDAQ complying 21 CFR part 11

Optional features

To avoid critical conditions and for ease of operation
Standby refrigeration system
Hooter
GSM technology
Extra trays
Extra sensor

Certification : ISO 9001:2015

Wireless access : A direct access to chamber is possible via mobile using IOT device

Sizes

Model	Capacity In litres	Internal Size in mm (WxDxH)	External Size in mm (WxDxH)	No. of trays
CBba1.25	125	500x500x500	670x960x1150	2
CBba2	200	500x500x800	670x960x1450	2
CBba3	300	550x500x1100	720x960x1750	3
CBba4	400	650x550x1130	820x1010x1780	3
CBba6	600	750x700x1150	920x1160x1800	3
CBba8	800	850x830x1140	1020x1290x1790	4

View Complete Details

Ask Latest Price & Details

Laboratory Hot Air Oven

30,000 /Piece Get Latest Price

Min. Order (MOQ) 1 Piece
Feature Rust Resistance, Fast Heating, Energy Saving Certified
Frequency 50Hz
Automatic Grade Semi Automatic
Power 1-5kw
Temperature Range 50 to 300 Degree C
Model CBlo0.3
Accuracy ± 0.2 Degree C

Equipment : Controller based Laboratory oven
Control system : PID based microcontroller for controlling temperature and cut off of thermostat with settable time
Air circulation : To get an uniform temperature a High quality centrifugal blower connected to a motor will blow the air from up to down, controlled by microcontroller
Heating system : SS. U shaped air heaters (generally nichrome wire)
Insulation : 80 mm sheet of foam (generally glass wool)
Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size
Safety for excess heating : A settable thermostat to cut off the heating automatically
Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber
Sensors : PT 100 sensor to sense temperature (sustain in high temperature)
Software : CDAQ complying 21 CFR part 11
Certification : ISO 9001:2015
Display : 7 segment alphanumeric LED display
Timer : Soak timer controller with end cycle buzzer