Post Buy Requirement
CI
Pune, Maharashtra, India
Verified Add Review

Other Products / Services #4529510

ACUITY BATTERY MONITORING SYSTEM

Finally, there is a solution for one of the greatest dilemmas of fleet managers: complete and accurate battery information for the life of the battery, to help extend battery life, to improve productivity and operating efficiency all with significant impact on the bottom line.
View Complete Details

Crutis TH Tiller Heads

  • Brand Crutis
  • Weight 3.3 lbs., maximum (1.5 kg)
  • Throttle Output 0.2 - 5.0VDC nominal (0.15VDC - 5.3VDC, absolute)
  • Operating Voltage 24VDC nominal (19.2VDC - 28.8VDC, absolute)
  • Maximum Current, Output Switches 2A each (lift, lower, horn, turtle)
  • Force Required 2.2 lbs. (10N)
View Complete Details

Curtis Handheld Programmer Device

  • Type Programming And Diagnostic Tool
  • Application Programmable motor controllers or control systems
  • Model Name/Number 1313
  • Brand Curtis
  • Data Saving PC and SD Card
  • Internal Memory 64 Mb
View Complete Details

Curtis Foot Pedals Input Device

  • Model Name/Number FP10
  • Brand Crutis
  • Temperature Range -40 Degree C to +85 Degree C
  • IP Rating IP67
  • Feature 0 - 5k potentiometer output easily interfaces with motor controller throttle inputs and avoids the n
  • Model FP10
View Complete Details

Curtis Battery Fuel Gauge Instrument

  • Model Name/Number 906
  • Brand Curtis
  • Display Type Red, 10-bar LED or Tri-Color, 10-bar LED
  • Mounting U-bracket (D, R) or Snap-fit bracket (J, Y, Z) or Screws/Nuts (F, T)
  • Function BDI Only
  • Hour Meter No
  • Lift Lockout No
  • Output Logic Level 0-5V
  • Interconnect 3/16
  • Low Fuel Warning Two LED Bars flash alternately
  • Housing 52 mm round (R) or 24mmx48mm Rectangular (D) or 23mmx36mm Rectangular (F, J, T) or 28mmx41mm Rectangul
  • Keyswitch Input Yes
  • BDI Reset Method CTR, OCR
  • Operating Voltage [VDC] 12 - 48 VDC
View Complete Details

Steering Sensors

Curtis Steering Sensor Units replace conventional steering columns on steer-by-wire electric power steering systems. They are fully integrated electromechanical units consisting of a shaft, bearings and sensors. Steering Sensor Units convert the mechanical movement of the steering wheel into a dual-redundant electrical signal that provides steering wheel position, steering speed and direction data to the steering control system.
View Complete Details

CAN Interface Expansion Module

The Curtis Model 13561356P CANbus IO expansion module provides accurate control of up to 5 fingertip joysticks, or can be used to add additional digital and analog IO to any CANopen* based control system. It is available as a conformally coated PCB (model 1356) or in an epoxy filled enclosure (1356P). *Contact your local Curtis sales office for SAE J1939 support options.
View Complete Details

Curtis Battery Chargers

  • Brand Name Crutis
  • AC Mains Input 85-265 VAC
  • Feature Battery temperature monitoring allows more accurate measurement and charging.
  • Model 1623
  • IP Range IP66
View Complete Details

Brushed DC Permanent Magnet Controllers

  • VEHICLE TYPE Industrial , Mobility Scooter
Curtis Permanent Magnet motor controllers provide fully programmable, 4-quadrant speed control of brushed DC permanent magnet motors, allowing programmable acceleration, deceleration, and current limiting.
View Complete Details

Curtis Electric Power Steering Controller

  • Voltage 24V, 36V, 48V, 60V, 72V, 80V DC
  • Motor Type AC Induction
  • IP Rating IP 65
  • Usage/Application Electronic Power Steering (EPS)
  • Model Name/Number 1222
  • Brand Curtis
  • Maximum Current 70Arms
View Complete Details

Vehicle System Controller

The Curtis Vehicle Controller, Model 1310, is a single-point "Master" control of multiple vehicle functions which can be applied to electric vehicles, non-electric vehicles and stationary control systems. Model 1310 works in conjunction with Curtis CAN-based motor controllers and other CAN-open devices.
View Complete Details

Electronic Code Switch

Electronic Code Switch 12-120VDC, 12 button, programmable. The Electronic Code Switch is designed for safe machine control and to help prevent unauthorized access use of the machine.
View Complete Details

Pot Assemblies

Wig-Wag throttles which provide an output for motion in both directions. A conductive plastic element in conjunction with unique wiper and shaft support design provides a durable throttle with longer mechanical life.
View Complete Details

Curtis Multi-voltage Audible Alarms

  • Country of Origin India
  • Type Motor Controllers
  • Application Motor Controlling

Curtis multi-voltage audible alarms are designed to protect people working in proximity to material handling equipment and other types of vehicles. Available in voltages from 12 V to 72 V with output of 87 to 97 dBa. 12 to 48 V is available with output between 82 dB and 107 dB. Environmentally protected for use indoors and out, Curtis alarms can operate in temperatures ranging from -40 to +77C.

View Complete Details

Alarm Warning Devices

  • Voltage 12 V to 72 V
  • Brand Crutis
  • Audio Output 82 dB and 107 dB
  • Temperature Rang -40 to +77 Degree C.
  • Converters DC/DC converters.
View Complete Details

Battery State-of-Charge Instruments

  • FUNCTION BDI / Hour Meter , BDI / Hour Meter / Codes.
Curtis offers the widest range of Battery State-of-Charge (BSOC) instruments in the industry and continues to develop new algorithms to improve accuracy as well methods of measuring the state-of-charge of other battery chemistries and alternative fuel sources.
View Complete Details

Serial Communication Instruments

  • LCD STYLE Dot Matrix / Color. , and Dot Matrix / Monochrome.
CAN and Serial Communication instruments from Curtis display vehicle data and fault information. These gauges connect directly to Curtis controllers and IO modules, easily, seamlessly and conveniently.
View Complete Details

Curtis Dc To Dc Converters

  • Input Voltage 12-24, 36-80 VDC
  • Model Name/Number 1420
  • Brand Crutis
  • Output Power 12 W
  • Output Current Limit (12V) 2.1 A
  • Output Current Limit (24V) 1.0 A
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

List of Other Products by Curtis Instruments India Private Limited from Pune, Maharashtra.
Post Buy Requirement
CI
Pune, Maharashtra, India
Verified Add Review

Our Products

  1. Motor Controllers 3 Products available
  2. Process Control Systems & Equipment

    2 Products available
  3. Laboratory Apparatus

    2 Products available
  4. Surveillance Systems

    1 Products available
  5. Sensors

    1 Products available
  6. Telecommunication Equipment & System

    1 Products available
  7. Audio Recorders, Mixers & Transmitters

    1 Products available
  8. Measuring Instruments & Equipment

    1 Products available
  9. Electrical & Electronic Testing Devices

    1 Products available
  10. Others Products 8 Products available

Other Products / Services #4529510

Our Complete range of products are Curtis Handheld Programmer Device, Curtis Foot Pedals Input Device, CAN Interface Expansion Module, brushed DC permanent magnet Controllers and Curtis Electric Power Steering Controller.

ACUITY BATTERY MONITORING SYSTEM

Finally, there is a solution for one of the greatest dilemmas of fleet managers: complete and accurate battery information for the life of the battery, to help extend battery life, to improve productivity and operating efficiency all with significant impact on the bottom line.
View Complete Details

Crutis TH Tiller Heads

  • Brand Crutis
  • Weight 3.3 lbs., maximum (1.5 kg)
  • Throttle Output 0.2 - 5.0VDC nominal (0.15VDC - 5.3VDC, absolute)
  • Operating Voltage 24VDC nominal (19.2VDC - 28.8VDC, absolute)
  • Maximum Current, Output Switches 2A each (lift, lower, horn, turtle)
  • Force Required 2.2 lbs. (10N)
View Complete Details

Curtis Handheld Programmer Device

  • Type Programming And Diagnostic Tool
  • Application Programmable motor controllers or control systems
  • Model Name/Number 1313
  • Brand Curtis
  • Data Saving PC and SD Card
  • Internal Memory 64 Mb
View Complete Details

Curtis Foot Pedals Input Device

  • Model Name/Number FP10
  • Brand Crutis
  • Temperature Range -40 Degree C to +85 Degree C
  • IP Rating IP67
  • Feature 0 - 5k potentiometer output easily interfaces with motor controller throttle inputs and avoids the n
  • Model FP10
View Complete Details

Curtis Battery Fuel Gauge Instrument

  • Model Name/Number 906
  • Brand Curtis
  • Display Type Red, 10-bar LED or Tri-Color, 10-bar LED
  • Mounting U-bracket (D, R) or Snap-fit bracket (J, Y, Z) or Screws/Nuts (F, T)
  • Function BDI Only
  • Hour Meter No
  • Lift Lockout No
  • Output Logic Level 0-5V
  • Interconnect 3/16
  • Low Fuel Warning Two LED Bars flash alternately
  • Housing 52 mm round (R) or 24mmx48mm Rectangular (D) or 23mmx36mm Rectangular (F, J, T) or 28mmx41mm Rectangul
  • Keyswitch Input Yes
  • BDI Reset Method CTR, OCR
  • Operating Voltage [VDC] 12 - 48 VDC
View Complete Details

Steering Sensors

Curtis Steering Sensor Units replace conventional steering columns on steer-by-wire electric power steering systems. They are fully integrated electromechanical units consisting of a shaft, bearings and sensors. Steering Sensor Units convert the mechanical movement of the steering wheel into a dual-redundant electrical signal that provides steering wheel position, steering speed and direction data to the steering control system.
View Complete Details

CAN Interface Expansion Module

The Curtis Model 13561356P CANbus IO expansion module provides accurate control of up to 5 fingertip joysticks, or can be used to add additional digital and analog IO to any CANopen* based control system. It is available as a conformally coated PCB (model 1356) or in an epoxy filled enclosure (1356P). *Contact your local Curtis sales office for SAE J1939 support options.
View Complete Details

Curtis Battery Chargers

  • Brand Name Crutis
  • AC Mains Input 85-265 VAC
  • Feature Battery temperature monitoring allows more accurate measurement and charging.
  • Model 1623
  • IP Range IP66
View Complete Details

Brushed DC Permanent Magnet Controllers

  • VEHICLE TYPE Industrial , Mobility Scooter
Curtis Permanent Magnet motor controllers provide fully programmable, 4-quadrant speed control of brushed DC permanent magnet motors, allowing programmable acceleration, deceleration, and current limiting.
View Complete Details

Curtis Electric Power Steering Controller

  • Voltage 24V, 36V, 48V, 60V, 72V, 80V DC
  • Motor Type AC Induction
  • IP Rating IP 65
  • Usage/Application Electronic Power Steering (EPS)
  • Model Name/Number 1222
  • Brand Curtis
  • Maximum Current 70Arms
View Complete Details

Vehicle System Controller

The Curtis Vehicle Controller, Model 1310, is a single-point "Master" control of multiple vehicle functions which can be applied to electric vehicles, non-electric vehicles and stationary control systems. Model 1310 works in conjunction with Curtis CAN-based motor controllers and other CAN-open devices.
View Complete Details

Electronic Code Switch

Electronic Code Switch 12-120VDC, 12 button, programmable. The Electronic Code Switch is designed for safe machine control and to help prevent unauthorized access use of the machine.
View Complete Details

Pot Assemblies

Wig-Wag throttles which provide an output for motion in both directions. A conductive plastic element in conjunction with unique wiper and shaft support design provides a durable throttle with longer mechanical life.
View Complete Details

Curtis Multi-voltage Audible Alarms

  • Country of Origin India
  • Type Motor Controllers
  • Application Motor Controlling

Curtis multi-voltage audible alarms are designed to protect people working in proximity to material handling equipment and other types of vehicles. Available in voltages from 12 V to 72 V with output of 87 to 97 dBa. 12 to 48 V is available with output between 82 dB and 107 dB. Environmentally protected for use indoors and out, Curtis alarms can operate in temperatures ranging from -40 to +77C.

View Complete Details

Alarm Warning Devices

  • Voltage 12 V to 72 V
  • Brand Crutis
  • Audio Output 82 dB and 107 dB
  • Temperature Rang -40 to +77 Degree C.
  • Converters DC/DC converters.
View Complete Details

Battery State-of-Charge Instruments

  • FUNCTION BDI / Hour Meter , BDI / Hour Meter / Codes.
Curtis offers the widest range of Battery State-of-Charge (BSOC) instruments in the industry and continues to develop new algorithms to improve accuracy as well methods of measuring the state-of-charge of other battery chemistries and alternative fuel sources.
View Complete Details

Serial Communication Instruments

  • LCD STYLE Dot Matrix / Color. , and Dot Matrix / Monochrome.
CAN and Serial Communication instruments from Curtis display vehicle data and fault information. These gauges connect directly to Curtis controllers and IO modules, easily, seamlessly and conveniently.
View Complete Details

Curtis Dc To Dc Converters

  • Input Voltage 12-24, 36-80 VDC
  • Model Name/Number 1420
  • Brand Crutis
  • Output Power 12 W
  • Output Current Limit (12V) 2.1 A
  • Output Current Limit (24V) 1.0 A
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us