Our Products
Access Control Reader
1 Products availableLeading Manufacturer, Supplier & Retailer of LAPTOP METAL TAGS, CYLINDER LF TAG, LF GLASS TAG, Circular Polarization Antenna Device and Linear Polarization Antenna Device.
Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
---|---|
Chemical sterilization for decontamination Liquid chemical sterilants
include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid |
Pass |
Thermal (hot water) disinfection • Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers
reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying.• Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C
[250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). |
Pass |
Ultrasonic cleaner 3KHz for 30 min | Pass |
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn
to 275nrn |
Pass |
Detergent enzyme cleaner | Pass |
Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
Application and Installation | |
---|---|
Application | Medical devices |
Applicable surface | Metal |
Mounting methods | Epoxy, tag carrier, welded |
Epoxy | FDA approved, autoclavable |
Product Dimensions and Weight | |
---|---|
Dimensions (mm) | ø 4.08 x 2.58 |
tolerance | +/- 0.01 |
Dimensions (in) | ø 0.16 x 0.10 |
tolerance | +/- 0.004 |
Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
---|---|
Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid |
Pass |
Thermal (hot water) disinfection• Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying.
• Pasteurization equipment provides cleaning and high-level disinfection at • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and |
Pass |
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). |
Pass |
Ultrasonic cleaner 3KHz for 30 min | Pass |
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn |
Pass |
Detergent enzyme cleaner | Pass |
Autoclave sterilization 134 °C and 0.6 Mpa for more than 1000 cycles | Pass |
Application and Installation | |
---|---|
Application | Surgical instruments |
Applicable surface | Metal |
Mounting methods | Glue, embedded |
Product Dimensions and Weight | |
---|---|
Dimensions (mm) | 6.75 x 2.08 x 2.08 |
tolerance | +/- 0.2 |
Dimensions (in) | 0.26 x 0.08 x 0.08 |
tolerance | +/- 0.008 |
Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
---|---|
Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid |
Pass |
Thermal (hot water) disinfection• Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying.
• Pasteurization equipment provides cleaning and high-level disinfection at • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and |
Pass |
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). |
Pass |
Ultrasonic cleaner 3KHz for 30 min | Pass |
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn |
Pass |
Detergent enzyme cleaner | Pass |
Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
Application and Installation | |
---|---|
Application | Surgical devices, plastic handle |
Applicable surface | Metal, plastic |
Mounting methods | Glue, injection mould |
Glue | FDA approved, autoclavable |
Product Dimensions and Weight | |
---|---|
Dimensions (mm) | 12.8 (+/-0.3) x 7.08 (+/-0.3) x 3.08 (+/-0.2) |
Dimensions (in) | 0.50 (+/-0.011) x 0.28 (+/-0.011) x 0.12 (+/-0.008) |
Weight | 0.05 oz (1.4 g) |
Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
---|---|
Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid | Pass |
Thermal (hot water) disinfection • Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying. • Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). | Pass |
Ultrasonic cleaner 30 KHz for 30 min | Pass |
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn | Pass |
Detergent enzyme cleaner | Pass |
Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
Installation instructions |
---|
Step1: The tag will be fixed with metal bracket, • Screws (Rivet hole, M3) • Pop rivets (3mm) |
Step2: The tag with bracket can be attached in several methods: • Screws (Rivet hole, M3) • Pop rivets (3mm) • Welding |
Product Dimensions and Weight | |
---|---|
Dimensions (mm) | 51 x 36.3 x 7.5 |
tolerance | +/- 0.5 mm |
Dimensions (in) | 2.01 x 1.43 x 0.30 |
tolerance | +/- 0.02 in |
Rivet hole diameter | 0.126 in +/-0.008 (3.2 mm +/- 0.2) |
Environmental and Industry Compliance | |
---|---|
RoHS | EU Directive 2002/95/EC |
ATEX | ATEX Compliant |
Healthcare sterilization compliance | ISO 17665 – Moist Steam, ISO 11135 – Ethylene Oxide |
FDA class | Class I |
Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
---|---|
Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid | Pass |
Thermal (hot water) disinfection
• Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying. • Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). | Pass |
Ultrasonic cleaner 3KHz for 30 min | Pass |
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn | Pass |
Detergent enzyme cleaner | Pass |
Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
Operational and Environmental Specifications | |
---|---|
Operational temperature | |
Cold | -40°F (-40°C) |
Dry heat (Long term, days/weeks/years) | +185°F (+85°C) |
Application temperature | |
Cold | -40°F (-40°C) |
Dry heat (Short term, minutes/hours) | +482°F (+250°C) |
Temperature cycling testing | 6 hours at +250°C, 18 hours cool-down, 30 days test cycle |
Humidity | |
Operational humidity | 5%-95% non-condensing |
Storage humidity | 5%-95% non-condensing |
Compression strength | 1145 psi (7900 kPa) |
Drop | 3 ft (1 m) to concrete/granite up to 100 cycle |
Vibration | MIL-STD-810F |
IP classification | IP69K |
Product Dimensions and Weight | |
---|---|
Dimensions / tolerance(mm) | 48 x 28 x 13.5 (+/- 0.5) |
Dimensions / tolerance (in) | 1.89 x 1.10 x 0.53 (+/- 0.02) |
Weight / tolerance | 1.55 oz / 44 g (+/- 10%) |
Dimensions w/o bracket / tolerance (mm) | ø 28 x 11 (+/- 0.5) |
Dimensions w/o bracket / tolerance (in) | ø 1.10 x 0.43 (+/- 0.02) |
Weight / tolerance (w/o bracket) | 0.92 oz / 26 g (+/- 10%) |
Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
---|---|
Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid | Pass |
Thermal (hot water) disinfection • Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying. • Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). | Pass |
Ultrasonic cleaner 3KHz for 30 min | Pass |
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn | Pass |
Detergent enzyme cleaner | Pass |
Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
Application and Installation | |
---|---|
Application | Medical devices |
Applicable surface | Metal, plastic |
Mounting methods | Epoxy, tag carrier, welded |
Epoxy | FDA approved, autoclavable |
Product Dimensions and Weight | |
---|---|
Dimensions (mm) | 12.3 x 3 x 2.2 |
tolerance | +/- 0.3 |
Dimensions (in) | 0.48 x 0.12 x 0.09 |
tolerance | +/- 0.012 |
Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
---|---|
Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid | Pass |
Thermal (hot water) disinfection• Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying.
• Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). | Pass |
Ultrasonic cleaner 3KHz for 30 min | Pass |
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn | Pass |
Detergent enzyme cleaner | Pass |
Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
Application and Installation | |
---|---|
Application | Medical devices |
Applicable surface | Metal, plastic |
Mounting methods | Epoxy, tag carrier, welded |
Epoxy | FDA approved, autoclavable |
Product Dimensions | |
---|---|
Dimensions (mm) | ø 6 x 2.5 |
tolerance | +/- 0.2 |
Dimensions (in) | ø 0.24 x 0.1 |
tolerance | +/- 0.008 |
Chemical resistance 4 No physical or performance changes in: (tested in 186 hour exprosure) | Salt water (15% salinity) / Ethanol / Acetone Industrial rust lubricant / Industrial cleaner Diesel fuel / Gasoline / Engine oil
|
Product Dimensions | |
---|---|
Dimensions (mm) | 51 x 36.3 x 7.5. |
tolerance | +/- 0.5 mm |
Dimensions (in) | 2.01 x 1.43 x 0.30 |
tolerance | +/- 0.02 in |
Rivet hole diameter | 0.126 in +/-0.008 (3.2 mm +/- 0.2). |
Environmental and Industry Compliance | |
---|---|
RoHS | EU Directive 2002/95/EC |
ATEX | ATEX Compliant |
Operational and Environmental Specifications | |
---|---|
Operational temperature | |
Cold | -22°F (-30°C) |
Dry heat (Long term, days/weeks/years) | +185°F (+85°C) |
Thermal shock | -22°F to 185°F (-30°C to +85°C); cycled |
Application temperature | |
Cold | -40°F (-40°C) |
Dry heat (Short term, minutes/hours) | +302°F (+150°C) |
Humidity | |
Operational humidity | 5%-95% non-condensing |
Storage humidity | 5%-95% non-condensing |
Shock (drop) | 3 ft (1 m) to concrete/granite up to 200 cycles |
Vibration | MIL-STD-810F |
Compression strength | 174 psi (1200 kPa) |
IP classification | IP68 |
Product Dimensions and Weight | |
---|---|
Dimensions (mm) | 17.7 x 10.9 x 5.0 |
tolerance | +/- 0.3 |
Dimensions (in) | 0.70 x 0.43 x 0.20 |
tolerance | +/- 0.012 |
Weight | 0.07 oz (2 g) |
Environmental and Industry Compliance | |
---|---|
RoHS | EU Directive 2002/95/EC |
CE | Yes |
ATEX | ATEX Compliant |
Operational and Environmental Specifications | |
---|---|
Operational temperature | |
Cold | -40°F (-40°C) |
Dry heat (Long term, days/weeks/years) | +185°F (+85°C) |
Application temperature | |
Cold | -40°F (-40°C) |
Dry heat (Short term, minutes/hours) | +302°F (+150°C) |
Humidity | |
Operational humidity | 5%-95% non-condensing |
Storage humidity | 5%-95% non-condensing |
Shock (drop) | 3 ft (1 m) to concrete/granite up to 200 cycles |
Vibration | MIL-STD-810F |
IP classification | IP68 |
Product Dimensions | |
---|---|
Dimensions (mm) | 12.3 x 3 x 2.2 |
tolerance | +/- 0.3 |
Dimensions (in) | 0.48 x 0.12 x 0.09 |
tolerance | +/- 0.012 |
Weight | 0.016 oz (0.44 g) |
Operational and Environmental Specifications | |
---|---|
Operational temperature | |
Cold | -40°F (-40°C) |
Dry heat (Long term, days/weeks/years) | +185°F (+85°C) |
Thermal shock | -40°F to 185°F (-40°C to +85°C); cycled |
Application temperature | |
Cold | -40°F (-40°C) |
Dry heat (Short term, minutes/hours) | +185°F (+85°C) |
Storage conditions | 1 years at +68°F (+20°C) and 50% relative humidity |
Shock (drop) | 3 ft (1 m) to concrete/granite up to 200 cycles |
Compression strength | 14 psi (97 kPa) |
Compliance | RoHS, CE |
Printer Compatibility | |
---|---|
Zebra | RZ400/R110Xi4 |
SATO | CL4NX/GT412e |
TOSHIBA | B-SX5T/SX4T |
Environmental and Industry Compliance | |
---|---|
RoHS | EU Directive 2002/95/EC |
FSTC | FSTC compliant |
Operational and Environmental Specifications | |
---|---|
Operational temperature | |
Cold | -40°F (-40°C) |
Dry heat (Long term, days/weeks/years) | +185°F (+85°C) |
Thermal shock | -40°F to 185°F (-40°C to +85°C); cycled |
Application temperature | |
Cold | -40°F (-40°C) |
Dry heat (Short term, minutes/hours) | +185°F (+85°C) |
Humidity | |
Operational humidity | 5%-95% non-condensing |
Storage humidity | 5%-95% non-condensing |
Shock (drop) | 3 ft (1 m) to concrete/granite up to 200 cycles |
Vibration | MIL-STD-810F |
IP classification | IP54 |
Compression strength | 14.5 psi (100 kPa) |
Product Dimensions | |
---|---|
Dimensions (mm) | 38 x 13 x 4.0 |
tolerance | +/- 0.35 |
Dimensions (in) | 1.50 x 0.51 x 0.16 |
tolerance | +/- 0.014 |
Weight | 0.09 oz (2.6 g) |
Tethering hole diameter | 0.1 in +/- 0.008 (2.6 mm +/- 0.2) |
Environmental and Industry Compliance | |
---|---|
RoHS | EU Directive 2002/95/EC |
CE | Approved |
Operational and Environmental Specifications | |
---|---|
Operational temperature | |
Cold | -40°F (-40°C) |
Dry heat (Long term, days/weeks/years) | +185°F (+85°C) |
Thermal shock | -40°F to 185°F (-40°C to +85°C); cycled |
Application temperature | |
Cold | -40°F (-40°C) |
Dry heat (Short term, minutes/hours) | +302°F (+150°C) |
Humidity | |
Operational humidity | 5%-95% non-condensing |
Storage humidity | 5%-95% non-condensing |
Shock and Vibration | MIL-STD-810F |
IP classification | IP68 |
Impact | 2kg from 1m |
Product Dimensions | |
---|---|
Dimensions (mm) | 56.5 x 5.95 x 1.3 |
tolerance | +/- 0.15 |
Dimensions (in) | 2.22 x 0.234 x 0.0512 |
tolerance | +/- 0.006 |
Weight | 0.035 oz (1 g) |
Environmental and Industry Compliance | |
---|---|
RoHS | RoHS EU Directive 2011/65/EC |
Operational and Environmental Specifications | |
---|---|
Operational temperature | |
Cold | -22°F (-30°C) |
Dry heat (Long term, days/weeks/years) | +185°F (+85°C) |
Thermal shock | -22°F to 185°F (-30°C to +85°C); cycled |
Application temperature | |
Cold | -40°F (-40°C) |
Dry heat (Short term, minutes/hours) | +185°F (+85°C) |
Humidity | |
Operational humidity | 5%-95% non-condensing |
Storage humidity | 5%-95% non-condensing |
Shock (drop) | 3 ft (1 m) to concrete/granite up to 200 cycles |
Vibration | MIL-STD-810F |
Compression strength | 26.1 psi (180 kPa) |
IP classification | IP54 |
Product Dimensions | |
---|---|
Dimensions (mm) | 50.3 x 17 x 5.3 |
tolerance | +/- 0.35 |
Dimensions (in) | 1.98 x 0.67 x 0.21 |
tolerance | +/- 0.014 |
Weight | 0.11 oz (3 g) |
Environmental and Industry Compliance | |
---|---|
RoHS | EU Directive 2002/95/EC |
Operational and Environmental Specifications | |
---|---|
Operational temperature | |
Cold | -40°F (-40°C) |
Dry heat (Long term, days/weeks/years) | +185°F (+85°C) |
Thermal shock | -40°F to 185°F (-40°C to +85°C); cycled |
Application temperature | |
Cold | -40°F (-40°C) |
Dry heat (Short term, minutes/hours) | +185°F (+85°C) |
Humidity | |
Operational humidity | 5%-95% non-condensing |
Storage humidity | 5%-95% non-condensing |
Shock (drop) | 3 ft (1 m) to concrete/granite up to 200 cycles |
Vibration | MIL-STD-810F |
Compression strength | 29 psi (200 kPa) |
IP classification | IP68 |
Product Dimensions | |
---|---|
Dimensions (mm) | 100 x 26 x 8.9 |
tolerance | +/- 0.5 |
Dimensions (in) | 3.94 x 1.02 x 0.35 |
tolerance | +/- 0.02 |
Weight | 0.61 oz (17.2 g) |
Rivet hole diameter | 0.137 in +/-0.008 (3.5 mm +/-0.2) |
Environmental and Industry Compliance | |
---|---|
RoHS | EU Directive 2002/95/EC |
ATEX | ATEX Compliant |
Operational and Environmental Specifications | |
---|---|
Operational temperature | |
Cold | -22°F (-30°C) |
Dry heat (Long term, days/weeks/years) | +185°F (+85°C) |
Thermal shock | -22°F to 185°F (-30°C to +85°C); cycled |
Application temperature | |
Cold | -22°F (-30°C) |
Dry heat (Short term, minutes/hours) | +302°F (+150°C) |
Humidity | |
Operational humidity | 5%-95% non-condensing |
Storage humidity | 5%-95% non-condensing |
Shock (drop) | 3 ft (1 m) to concrete/granite up to 200 cycles |
Vibration | MIL-STD-810F |
Compression strength | 156 psi (1076 kPa) |
IP classification | IP68 |
Product Dimensions and Weight | |
---|---|
Dimensions (mm) | ø 24.2 x 6.2 |
tolerance | +/- 0.3 |
Dimensions (in) | ø 0.95 x 0.24 |
tolerance | +/- 0.012 |
Weight | 0.13 oz (3.7 g) |