Bangalore, Karnataka, India
GST : 29AALFC3452B1ZN
Verified
Add Review
Our Product / Services
Models
Instrument Description and Construction
Standard Accessories
This apparatus is used for determination of flash points of liquid samples, whose flash points are above 450C to 3500C in closed test conditions. Outer body made of mild steel powder coated, Complete with cup made of brass, lid assembly and LPG regulator with Y-cock. There are four variants.
Models
To test the Oxidation Stability of Steam Turbine and other Inhibited Mineral Oils
Additional Information:
Payment Terms : T/T
Packaging Details : Carton/Wooden Box
standard features
* automatic flash point detection
* automatic barometric pressure correction
* automatic flash point search mode for unknown samples.
* user set-able heating and flashing profile
* automatic or user set-able stirrer speed setting and control
* automatic heating profile setting depending on initial sample temperature and expected flash point.
* 16 x 4 line back lit alpha numeric display
* automatic cutoff at 30c beyond expected flash point or at max. temperature limit set by the user.
* 2 preset test modes as per astm method a & b
* in-bulit numeric key pad for settings
* audio visual indication of end of test and alarms
* over temperature safety cutoff and alarm.
* last reading stored until report is printed or next test is initiated.
* serial printer interface for automatic printing of test report at a press of a button.
* ensures min. power consumption by design thereby reducing operation cost.
* electrical ignition instead of gas (optional) additional features for auto-prime
* 5" colour touch screen graphic user interface
* lan enabled system
* internal storage of reports and results
* pre-loaded recipes for testing as per ip, astm, iso - methods a, b & c
* auto-diagnostic feature for self testing and fault detection
* in-built memory to store up to 10, 000+ reports
* in-built cooling arrangement.
* automatic flame relighting
* fire supression system
* multi point thermal calibration
Additional Information:
Payment Terms : T/T
Packaging Details : Cartoon Box
Delivery Time : 4-6 weeks
Supplied with Beaker, Test tube, Test Cup, Stick and Base unit, but without oil and thermometers
Confirms to ip170, ip33, ip113, bs2000 p-170, p-33, p113, iso dis 13736 this apparatus is used for determination of flash points of samples, whose flash points are below +490c.
Models
Optionals:
Application : The apparatus is used to test the rust prevention abilities of steam turbine oils when mixed with water.Instrument description and construction
Water Bath :
Inner of SS 304 with outer of Lt. Grey powder coated CR sheet, with microprocesor based pid temperature controller, motorised stirrer (TEFC motor) and SS heaters to maintain a uniform temperature.Supplied with a Bath cover with provision to hold 4 nos. of test beakers.
Test System :
Constructed to perform 2 simaltenous tests with duplicates. Supplied with 4 nos test specimens, glass beakers with PTFE covers to hold the specimen. The 4 SS stirrers held by chucks are driven by a geared single speed TEFC motor of 1000 + 50 RPM.The complete system is housed within a sturdy steel frame, elegantly powder coated The Mdrive motor and the gear assembly is housed on the top.
Compliance : IS:1448, ASTMD92, IP-36, IP-403, BS2000 P-403, Bs4689, DIN51 376, ISO 2592 This apparatus is used for determination of flash points of liquid samples, whose flash points are above 40oC to 350oC in open test conditions.
Models
Accessories/ Spares
Basic
Automatic
The above system when used when used with our ‘CI’ QUENCH software , becomes a fully automatic system with cooling curve analysis, and automatic determination of parameters like VP, BP, CP, Tmax, CRmax, Cra. Provision to compare test results and print report. It can also be used for qc requirements like pass/fail analysis as per set criteria(s)
As per IS;1448, IP:154 & ASTM-D-130-88 to find out the presence of corrosive sulphur in petroleum.The apparatus consists of a dual purpose (500 & 1000C) Water bath to accommodate 6 bombs or18 test tubes of specified dimensions.
The bath with 6 holes and individual cover with suitable hook for hanging bombs and to keep the bath holes closed. Inner chamber of S.S.with motorised stirrer. with Digital Temperature control-cum indication of set temp.
Confirms to the ASTM D 2711 / DIN 51353, Tests the ability of medium to high viscosity oils to separate from water.
Consists of,
Optional Accessories
Compliance : IS:1448, ASTMD92, IP-36, IP-403, BS2000 P-403, Bs4689, DIN51 376, ISO 2592 This apparatus is used for determination of flash points of liquid samples, whose flash points are above 40oC to 350oC in open test conditions.
Application
To determine the Sludge content in Oils
