Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

Culture Instruments India LLP

Culture Instruments India LLP
location Dabaspet, Bangalore, Karnataka

gstGST : 29AALFC3452B1ZN Verified Write a Review
View Number

Our Product / Services

  1. Paint Testing Equipment 34 Products available
  2. Petroleum Testing Equipment 27 Products / Services available
  3. Laboratory Equipments 19 Products available
  4. Viscosity Instruments 6 Products available
  5. Testing Equipment 6 Products available
  6. Explosive Testing Equipment 5 Products available

  7. Laboratory Shakers

    2 Products available

  8. Laboratory Ovens

    2 Products available

  9. Process Safety Testing Equipment

    2 Products available

  10. Lab Incubator

    1 Products available
  11. Others Products / Services 6 Products / Services available

Paint Testing Equipment

Our product range contains a wide range of Salt Spray Chamber, Wet Abrasion Scrub Tester, Resistance to Wear Test Apparatus, Cyclic Corrosion Chamber and RAL Shade Card

Salt Spray Chamber

Salt Spray Chamber
₹ 500 /Piece Get Latest Price
  • Application Industrial Use
  • Warranty 1year
  • Automation Grade Semi Automatic
  • Capacity 120 Ltr., 450ltr., 1000ltr.
  • Model SSC-120

Corrosion and weathering are the two major contributors, in degrading the metal substrate. Certain conditions like humidity, and Salt spray can be achieved or simulated in these chambers.

 

Confirming To : The basic system meets the requirements of ASTM B-117/ IS-1060 and other similar standards. The system can be further programmed and loaded with accessories (steam generator, dry air blower etc.)to function as per any standards or testing procedures like Causs, Prohesion, JIS, MIL , DIN, IEC, ASTM G-85, QM-333, ISO, JSS, JSS-penta5, various automotive standards like Ford, Volvo, Renault, Honda, GM, Toyota, Suzuki or as per your requirement.

 

Basic Model & Control System (advanced) Inner Chamber Size    

  • 715mm L x 490mm W x  485mm H (120Ltr) 
  • 1010 mm L x 640mm W x 850mm H (450ltr.) built in tank
  • 1300 mm L x 980mm W x 850mm H (1000ltr.) built in tank 
  • 1300 mm L x 980mm W x 850mm H (1000ltr.) with touch screen

 

Optional Accessories (at Extra Cost)

  • DM Plant 100ltr./hr
  • Peristatic Pump for Volume Regulation, with flow meter
  • Trolley for 120ltrs. Chamber only
  • Salt solution tank (150 ltrs.)
  • DM water tank
  • Salt solution low alarm
  • Pneumatic door lifting (450 and above)
  • Rack And Rod Set
  • pH Meter
  • Humidity Indicator Wet & Dry Bulb Principal
  • Chamber illumination ( 450 & above)
  • Lucite Atomizer
  • Data Logger (for 120ltr to be ordered with stand)
  • Spray Brake Alarm System (only Advanced Model)
View Complete Details
Ask Latest Price & Details
Wet Abrasion Scrub Tester

Wet Abrasion Scrub Tester
₹ 500 /Piece Get Latest Price
  • Application Industrial Use
  • Feature Durable, High Accuracy
  • Voltage 220V
  • Certificate CE Certified
  • Certification ASTM D 3450, 2486, 4213, 4828; DIN-53778; BS 7719, 3900 F-17; ISO 11998; IS:5411, 4284
  • Display Type LED display
  • Battery Backup Battery Backup for Unattended Testing
One of the most basic equipment to test the abrasion resistance / durability / gloss retention / endurance / cleaning properties etc., Of Detergents, Paints, varnishes, inks, plastics, Floor coverings, carpets, upholstery materials. Ceramics - glazed or unglazed, Tiles, Furnitures, Leathers, Garments, Wallpapers, etc., FEATURES a. 4 digit programmable pre-set counter with LED display and battery backup for unattended testing. b. 2 Scrubbing heads and tracks allow carrying out of Simultaneous Comparative tests. c. Self Cooling TEFC motor for trouble free performance. d. 3mm Glass plate on a Stainless Steel top tray make a non-corrosive test surface. e. Adjustable Flow rate of test solution by a manually controlled Dripper / Programmable and precise peristaltic Pump.STANDARD ACCESSORIES ASTM / IS Brush - 2 Nos. CARRIAGE ASSEMBLY - 1 No. WEIGHTS 500 Gms. - 2Nos. OPTIONAL ACCESSORIES / SPARES BRUSHES AS PER DIFFERENT STANDARDS. CARRIAGE ASSEMBLIES SUITABLE FOR DIFFERENT BRUSHES. S.S. WEIGHTS
View Complete Details
Ask Latest Price & Details
Resistance To Wear Test Apparatus

Resistance To Wear Test Apparatus
  • Voltage 230V
  • Phase Single Phase
  • Frequency 50Hz
  • Use Industrial
  • Pack Type Box
SPECIFICATIONS: MOTOR : CROMPTON 1400 RPMWHEELS : 100MM DIA.TURN TABLE : 300MM DIA.TURN TABLE SPEED : 200 RPMLOAD : 230V AC MAINS, SINGLE PHASE, Prepare the paint film of the material, apply on the disc. Air-dry for 2 hours.Switch on the instrument, the disc starts to rotates @200RPM, Place the rubber-tyred wheels on it, Keep the painted surface wet with water sprayed in the inneredge of the wheels.Examine visually the wear on both the tracks at regular intervals, till the paint wears out completely
View Complete Details
Ask Latest Price & Details
Cyclic Corrosion Chamber

Cyclic Corrosion Chamber
₹ 1 - ₹ 25 Lakh /Pieces Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Application Industrial Use
  • Voltage 220V
  • Driven Type Electric
  • Phase Double Phase, Single Phase, Three Phase
  • Warranty 2years
  • Automation Grade Automatic
View Complete Details
Ask Latest Price & Details
Ral Shade Card

Ral Shade Card
₹ 500 /Piece Get Latest Price
  • Material Natural Paper
  • Feature Glossy Look, Non Tearable
  • Outer Material Laminated
  • Printing style Double Sided
  • Finish Matt & Glossy
RAL K5 SERIES Compact , individuals colour chart u-shaped protective cover contains all 213 RAL classic shades available in two variants RAL K5 GLOSSY RAL KR SEMI MATT RAL K7 SERIES Compact, 5 colours per page u-shaped protective cover contains 213 RAL classic shades Each colour measuring 2.0 x 5.0cm RAL K7 GLOSSY
View Complete Details
Ask Latest Price & Details
Conical Mandrel Bend Tester

Conical Mandrel Bend Tester
₹ 500 /Piece Get Latest Price
  • Material Stainless Steel
  • Standard ASTM D 522/BS:3900
  • Diameter 37mm to 3mm
  • Length of 200mm
  • Note Calibration Certification charges to NPL standards
CONICAL MANDREL A perfect bend tester to test the elasticity and elongation of various coatings, on metals. It Confirms to standards ASTM D-522, D1737 /BS 3900 E11 / ISO 6860 / DIN 53150, 66669. The conical mandrel is made of stainless steel. It is tapered from 37mm to 3mm dia, over a length of 200mm. This allows easy identification in a single operation, the coating failure at specified diameter over part or entire length of mandrel. It has a sturdy construction. The sample panel is clamped between the scale, and bent by rotation of the roller. OVERALL WEIGHT :4.5Kgs. (approx)
View Complete Details
Ask Latest Price & Details
Single Sided Film Applicator

Single Sided Film Applicator
₹ 500 /Piece Get Latest Price
  • Material Stainless Steel
  • Film Width 60mm
  • Standard ASTM D823
  • Supplied In Deluxe Wooden Box
  • Standard Size 50, 100, 125, 150, 200, 350 microns
These applicators are precisely machined and finished to meet the quality requirement for the coating industry. They provide perfect film draw downs, essential for testing purposes. Suitable for application on hiding charts or any other flat, rigid and smooth surface. All applicator are made of stainless steel, hence Corrosion resistant, Easy to clean, and not affected by any mild acids or base elements Confirms to ASTM D823, ASTM D 1084 Supplied in a deluxe wooden box along with confirmatory certificate. Standard FILM WIDTH Size: 60mm 90mm 300mm 50 microns 10015-00 10015-10 10015-20 75 microns 10015-01 10015-12 10015-21 100 microns 10015-02 10015-13 10015-22 125 microns 10015-03 10015-14 10015-23 150 microns 10015-04 10015-15 10015-24 200 microns 10015-05 10015-16 10015-25 250 microns 10015-06 10015-17 10015-26 300 microns 10015-07 10015-18 10015-27 350 microns 10015-08 10015-19 10015-28 * Other user selectable sizes on request only. * Calibration Certification tradeable to NPL 10015-30

Details

Size 60mm                     90mm                 300mm
50 microns  10015-00              10015-10                10015-20
100 microns  10015-01              10015-11                10015-21
125 microns  10015-02              10015-12                10015-22
150 microns     10015-03              10015-13                10015-23
200 microns    10015-04              10015-14                10015-24
350 microns    10015-05              10015-15                10015-25
* Other user selectable sizes on request only.
* Calibration Certification tradeable to NPL 10015-30
View Complete Details
Ask Latest Price & Details
Adjustable Film Coating Applicator

Adjustable Film Coating Applicator
₹ 10,000 - ₹ 1 Lakh /Pieces Get Latest Price
  • Material Stainless Steel
  • Other Name Micrometer Adjustable Applicator
  • Size 100-300mm
  • Weight 583 g
  • Surface Polished
The applicator is specially designed for research and development purpose with user variable coating thickness using micrometer, adjustment from 0- 10mm in steps of 10 microns. 10045-00 Application width of 100mm 10045-01 Application width of 150mm 10045-02 Application width of 200mm 10045-03 Application width of 300mm
View Complete Details
Ask Latest Price & Details
Automatic Film Applicator

Automatic Film Applicator
₹ 500 /Piece Get Latest Price
  • Voltage 220V
  • Warranty 1yrs
  • Operation on 230V Ac,
  • Stroke Length 400mm
  • Adjustable Speed From 1mm to 500mm/sec
It is made from high precision machined components, sturdymain frame and heavy duty power train assembly, to ensurelong term reliable operation.Consistent draw down conditions such as speed, flatness, combined with applicator gap are essential to obtain perfectlyreproducible samples, eliminating human errors anduncertainty. Adjustable speed from 1mm to 500mm/sec. softtouch keyboard with two line backlit display. Stroke length400mm, with stainless steel bed. Emergency stop switch.Operation on 230V Ac,
View Complete Details
Ask Latest Price & Details
Drying Time Recorder

Drying Time Recorder
  • Type Drying Time Recorder
  • Certification ISI Certified
  • Voltage 220V, 240V
  • Frequency 50 Hz, 60 Hz
  • Driven Type Electric
  • Stroke Length 0-200 Mm
  • Automation Grade Automatic

We are the main supplier of this product.

View Complete Details
Ask Latest Price & Details
Drying Time Recorder Linear

Drying Time Recorder Linear
₹ 500 /Piece Get Latest Price
  • Standard ASTM D-5895
  • Consists Of Motorized Carriage with 6 Hemispherical Stylus On
  • 6 glass strips (Tracks) 25 x 305mm or 150 x 305mm
  • 5 User Selectable Speeds 3, 6, 12, 24, and 48 Hrs.
  • Supplied complete with Glass strips, Hemispherical Stylus, S.S. Weights of 5 & 10 gms.
  • Operation On 230V A.C. Mains, 50 Hz, Single Phase
Used to test drying / setting time of paints, varnishes, inks etc., Drying time could be essential for your products or processes.CI series of Drying time recorders designed as per ASTM D- 5895, offersa convenient, easy and accurate method of doing so.Consists of :Motorized carriage with 6 hemispherical stylus running on 6 glass strips of 25 x 305 mm or a single glass of 150 x 305mm to carry out 6 simultaneoustests at a time.Five user selectable speed/time 3, 6, 12, 24 & 48hrs. The drying time iscalculated with the help of the distance moved, which can be determinedfrom the scale provided on both the sides. The recorder automaticallystops at the end of the test period and is provided with a secondary safetylimit switch for additional protection of both the equipment and your testresults.Operation on 230V A.C mains, 50 Hz, single phase
View Complete Details
Ask Latest Price & Details
Paint Corrosion Cabinet

Paint Corrosion Cabinet
₹ 500 /Piece Get Latest Price
  • Speciality Corrosion Resistant
  • Certification IS:101
  • Accessories Programmable recorder with Pc interface
  • Accuracy ± 1C
  • Temperature 42 Deg. C to 48 Deg. C
Used to measure the corrosion of painted panels under humidity conditions within a definite temperature range. Inner chamber is made of Stainless steel, In built reservoir, to heat the cabinet through water with air circulating fan to maintain a uniform temperature inside the cabinet. Confirming to IS:101. Cabinet is supplied with panel Rack.Digital temperature controller cum indicator.Working temp. Range: 42 to 48C.Operation on 230V, single phase.Water tank volume : approx. 15ltr.
View Complete Details
Ask Latest Price & Details
Cylindrical Mandrel Bend Tester

Cylindrical Mandrel Bend Tester
₹ 500 /Piece Get Latest Price
  • Made of Stainless Steel Rollers
  • Diameter 2mm to 32mm
  • Standard ASTMD 522
  • Uses It comes with a sturdy vice for fixing the mandrels
  • Consists Of 2, 3, 4, 5, 6, 8, 10, 12, 16, 18, 20, 22, 25 & 32mm Mandrels in a Wooden Box
  • Note Calibration Certification charges to NPL standards
This test is carried out by bending the coated panel around mandrels of different diameters until damage occurs. Max. panel size: 70mm width and 0.8mm thick. Robust stainless steel Rollers from 2mm - 32mm dia, as per ASTM D 522, DIN 53152, EN-ISO 1519. Mandrels are supplied in a deluxe wooden box, with a sturdy vice, pre-drilled frame ready to secure on workbench and for fixing mandrels. Set of mandrels: 2, 3, 4, 5, 6, 8, 10, 12, 16, 18, 20, 22, 25 & 32mm.OVERALL WEIGHT : 7Kgs. (approx) Confirming to ASTM D 522. (IMPERIAL) Consists of 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 1 inch mandrels. ( 7 Nos.)
View Complete Details
Ask Latest Price & Details
Pencil Hardness Tester

Pencil Hardness Tester
₹ 500 /Piece Get Latest Price
  • Material Stainless Steel
  • Length 150-200mm
  • Packaging Type Carton Box
  • Structure Horizontal
  • Warranty 1 Year
  • Operating Type Manual
A traditional method to test the resistance of coatings to scratch. Pencils of progressive hardness, hold by a specific carriage are applied onto the test surface under a force of 750g, at 45 deg. angle. The surface will be variably damaged, in function of the pencil hardness, thus pass / fail or hardness to failure evaluations are possible. Built in spirit level.CODE:10005-01 MITSUBISHI' Hardness pencils set of 14 pencils 6B to 5H.CODE:10005-02 Set of 20 Pencils 9B TO 9H.CODE:10005-03 'STAEDTLER' Hardness pencils set of 12 pencils 6B to 4H.CODE:10005-04 Set of 19 pencils 8B to 9H.Set of 14Mitsubishi-UNI Pencils contain the following pencils 6B , 5B , 4B , 3B , 2B , B , HBx2nos. , F , H , 2H , 3H , 4H , 5HSet of 20 Mitsubishi-UNI Pencils contain the following pencils9B , 8B , 7B , 6B , 5B , 4B , 3B , 2B , B , HB , F , H , 2H , 3H , 4H , 5H , 6H , 7H, 8H , 9H.A greater percentage of clay results in a harder pencil lead, Pencils graded H, F, HB and B are of average hardness. Pencils ranging from 2B to 10B are softer and while 2H to 10H pencils are harder than average.The harder the pencil the lighter the mark, and the softer B-grade leads tend to create darker colors and smear easily.
View Complete Details
Ask Latest Price & Details
Wet Film Thickness Gauge

Wet Film Thickness Gauge
₹ 100 /Piece Get Latest Price
  • Material Stainless Steel
  • Color Silver
  • Feature Accuracy, Easy To Fit
  • Display Type Analog
  • Gauge Diameter 20-40mm
As per ASTM D 1212 , ISO 2808 and BS 3900 A wet film thickness gauge is designed to give the spray operator immediate feedback as to the film build just sprayed. In most cases, measuring the dry film thickness (DFT) provides little information as it is usually measured a considerable amount of time after the actual spraying. Many things could have influenced the DFT: Operator fatigue, Ambient air temperature, coating temperature, etc. There are several types of WFT gauges available. The most common being the notch gauge, Others types including the eccentric disk type. A stainless steel precision gauge to check wet film. A wheel machined with an eccentric central rim calibrated to increasing gap is rolled across the paint. The contact point on the rim indicates the film thickness. The gauge must be cleaned throughly after every use.
View Complete Details
Ask Latest Price & Details
Scratch Hardness Tester

Scratch Hardness Tester
₹ 500 /Piece Get Latest Price
  • Finishing Polished
  • Packaging Type Carton Box
  • Usage Laboratory
  • Specialities Easy To Use, Water Proof
  • Standard BS 3900 Part E2 / ISO 1518 1992, BS 6497, ASTM D5178 199.
STANDARDS CONFIRD5178MED TO : BS 3900 Part E2 / ISO 1518 1992, BS 6497, ASTM D5178 199. Optionally ASTM D2197 andD5178APPLICATION & PRINCIPLE: Life of Coatings depends on various parameters which includes hardness. Testing of coating hardness indicates the maximum. resistance the coatings can offer to external force. The process involves dragging of a 1mm ball indented needle on a smooth, coated surface under varying load from 100gms. to 10 Kg. DESCRIPTION AND CONSTRUCTION : Consists of a smooth and linear sliding platform which moves under a 1mm ball indenter, with the required load under a fixed speed. The one side coated panel is fixed to the platform. The automatic versions operate on 230V, 50 Hz. 1 phase AC supply whereas the manual operates on a 9V single battery. The systems indicate scratch by means of a buzzer and indicator which turn on when the needle touches the base metal. The automatic systems additionally have a voltmeter to indicate the level of coating failure and automatically disengage the needle from the panel when returning to home position. Test Panel size : 150 x 100 x 1mm STANDARD ACCESSORIES Ball Needle indentor 1 no. Weight 100gms 1 no. Weight 200gms 2 no. Weight 500gms 1 no. Weight 1000gms 1 no. Weight 2000gms 1 no OPTIONAL ACCESSORIES a. Mar test attachment b. Additional Weights c. SS Weights d. Calibration certificate MODELS: 10003-00 : Manual Scratch hardness tester 10003-01 : Automatic scratch hardness tester 10 Kg. Load 10003-02: Mar test attachment ( Automatic model only)
View Complete Details
Ask Latest Price & Details
Weight Per Liter Cup

Weight Per Liter Cup
₹ 900 /Piece Get Latest Price
  • Other Name Pyknometer
  • Made Of Stainless Steel
  • Capacity 100CC
  • Standard IS 101, BS: 3900
  • Note Calibration Certificate to NPL standards
For specific Gravity determination of paints or similar materials.Made of stainless steel, light weight, As per IS :101, BS3900Capacity :100cc
View Complete Details
Ask Latest Price & Details
Cube Film Applicator

Cube Film Applicator
₹ 500 /Piece Get Latest Price
  • Material Stainless Steel
  • Size 25mm
  • Pack Type Wooden Box
  • Standard Gap Size 40 & 75 Microns.50 & 100 Microns.150 & 200 Microns. 200 & 300 Microns.
  • Surface Polished
CUBE APPLICATORThis small applicator has 2 pre-defined thicknesses for application. Made of Stainless Steel, hence Corrosion resistant, Easy to clean, and not affected by any mild acids or base elements. It is a 25mm cube with a hole in the center, 2 gap sizes are machined into each applicator face. Paint is filled in the hole and the applicator is steadily moved to get a smooth application.

Details

Standard gap size: Code
40 & 75 microns. 10019-00
50 & 100 10019-01
150 & 200     10019-02
200 & 300  10019-03
* Similarly 2 and 3 reservoir cube applicator also available on request.
* Calibration Certification tradeable to NPL
View Complete Details
Ask Latest Price & Details
Pantone Shade Card

Pantone Shade Card
₹ 500 /Piece Get Latest Price
  • Color Multicolor
  • Feature Attractive Look, Non Tearable
  • Outer Material Laminated
  • Printing style Single Side
  • Individual Guide Size 1 5/8" x 9 1/4"
  • Includes 294 New Colors
Pantone Formula Guide Solid Coated & Un coated Two guide set with 2, 161 colorsNew colors added: 294Older edition had 1867 colorsOne guide has all the coated colors labelled ''C'' and the other un coated with initials ''U''Colors are each displayed with coordinating numbers and ink formulationscolors are predominantly arranged chromatically for ease lacating color.printed colors bleed off both page sides so colors can be best analyzed.An index can be found in the back of each guide.
View Complete Details
Ask Latest Price & Details
Powder Gelation Timer

Powder Gelation Timer
₹ 100 /Piece Get Latest Price
  • Resolution 0.1 Oeg. C
  • Application Industrial
  • Used for Powders
  • Material Aluminum Alloy
  • Color Grey
GELATION TIMER FOR POWDERS A simple hotplate type gelation timer. It consists of a 100mm hotplate with an indentation in the center for sample holding and a programmable, variable heating rate digital control system, to increase the temperature very gradually, so as to determine the exact gelation temperature. The actual gelation is determined by poking the heated sample with a wooden stick and observing the temperature at which it begins to set.
View Complete Details
Ask Latest Price & Details
Rotary Gelation Timer

Rotary Gelation Timer
₹ 100 /Piece Get Latest Price
  • Automation Grade Automatic
  • Usage/Application Laboratory
  • Brand Name CI
  • Model No 10004-00
  • Speed 20RPM
  • Pack Type Box
ROTARY GEL TIME RECORDER CI Rotary gelation timers are perfect for determining the gel time of Resinous plastics, adhesives, crying oils, two component elastomers, and paints. A low torque, synchronous motor rotates a specially shaped stirrer in the catalyzed resin or elastomer. As gelation occurs, drag exceeds torque and the motor stalls. This signals an electronic circuit which stops the clock . The gel time will show on the LCD display. Simple to operate - place the material sample in the cup, insert the wire stirrer, set the counter to 0 and switch on the Unit. Motor can remain stalled overnight without damaging the unit Models : RGT-B. : Basic without heating Standard Specifications Maximum Recording Time : 999Hr. 59 minutes, 59 seconds Minimum Recording Time : 1 second Stir Speed 20 rpm, 2 % accuracy Optionals Digital temp controlled heating pot up to 300C Spare Stirrers Spare Sample Cups
View Complete Details
Ask Latest Price & Details
Pull-Off Adhesion Tester

Pull-Off Adhesion Tester
₹ 500 /Piece Get Latest Price
  • Certification ISI Certified
  • Application Industrial Use
  • Feature Easy To Use, Electrical Porcelain, Four Times Stronger
  • Automatic Grade Automatic
  • Warranty 1 Year
Measures adhesion of coatings to metal, wood, concrete and other substrates Revolutionary self-alignment feature and pull rate indicator. Simple Portable requires no external power source ideal for lab and field use Pull Rate Indicator allows operator to easily monitor and adjust the rate of pull in accordance with international test methods. Easily select dolly sizes, change measurement units or store readings, with the touch of a button Conversion charts not required tester automatically calculates pressure based on dolly size. Durable Environmentally sealed enclosure weatherproof, dust proof and shock proof. Can be used in any position, Rugged carrying case. Accurate Every Adhesion Tester pressure system is calibrated and certified to NIST traceable load cell. Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces. Conforms to ASTM D4541/D7234, ISO 4624/16276-1, AS/NZS 1580.408.5 and others. Manual Adhesion Tester Heavy-duty manual hydraulic pump designed to apply smoothand continuous pull-off pressure with a single stroke Pull Rate Indicator to manually monitor and adjust the rate of pull Includes 2 AAA alkaline batteries
View Complete Details
Ask Latest Price & Details
Cross Hatch Tester

Cross Hatch Tester
  • Application Industrial
  • Handle Material ABS
  • Material Stainless Steel
  • Standard ASTM D 3359, BS / DIN / ISO - 2409
  • Size 1 mm, 2mm, 3mm
The Cross hatch tester is widely used to access adhesion of coating materials like paint, powder coatings, etc., CI Cross Hatch Tester is a hardened single cutting block as per international standards with 4 cutting edges, fixed to a comfortable die cast aluminium handle. Supplied Complete in deluxe wooden box.SPECIFICATIONS BODY MADE OF : DIE CAST ALUMINIUMOVERALL LENGTH : 125 mm LONGOVERALL WIDTH : 30 mm approx.BOX DIMENSION : 170mmx130mmx60mmOVERALL WEIGHT : 650gms. (approx)
View Complete Details
Ask Latest Price & Details
Bar Coaters

Bar Coaters
₹ 500 /Piece Get Latest Price
  • Specialities Durable, Easy To Use
  • Material Stainless Steel
  • Warranty 1 Year
  • Operating Type Manual
  • Bar Coater Number 1, 2, 3, 4, 5, 6, 7, 8, 9
These wired Bars are ideal for application of paints, inks, and similar coatings onto flexible materials such as papers, test charts, textiles, leather, etc., The grooves between the wires determines the applied thickness. Made of Stainless Steel and Stainless Steel wire, and are numbered. It is ideal for both manual and automatic film applications. Easy to clean, and corrosion resistance. Pads or Application Table with rubber top. With effective coating area of 110mm Wx180mm L 10037-00With effective coating area of 240mm Wx330mm L 10037-01
View Complete Details
Ask Latest Price & Details
Gloss Meter

Gloss Meter
₹ 11,000 - ₹ 12,000 /Piece Get Latest Price
  • Type Gloss Meter
  • Material Plastic, Stainless Steel
  • Shape Rectangular, Square
  • Certification ISO 9001:2008
  • Condition New Used
  • Application Household, Industrial, Laboratory
  • Display Type Analog, Digital
  • Power Source Battery, Electric
  • Feature Durable, High Accuracy, Light Weight, Low Power Consumption, Stable Performance, Good Quality, Easy To Use
  • Warranty 1Years
View Complete Details
Ask Latest Price & Details
Analog Cross Hatch Tester

Analog Cross Hatch Tester
₹ 3,500 /Set Get Latest Price
  • Brand Name CI
  • Material SS, MS, Glass, PP
  • Model Name/Number 10025
  • Usage/Application Laboratory
  • Packaging Type Box
  • Display Type Analog
  • Sizes 1, 2 & 3 mm Widths.
View Complete Details
Ask Latest Price & Details
ISO Flow Cup

ISO Flow Cup
₹ 100 /Piece Get Latest Price
  • Material Stainless Steel
  • Power Hydraulic
  • Thickness 2 - 10 mm
  • Weight 500gm - 1 Kg
  • Surface Polished
  • Usage Laboratory
ISO VISCOSITY FLOW CUPSTANDARD NO. RANGE ORIFICE CODE cSt DIA.(mm)Alum Brass 3 7-42 3 10002-38 10002-37 4 34-135 4 10002-40 10002-39 ISO CUP 2431 5 91-326 5 10002-42 10002-41 (BS/EN) 6 188-684 6 10002-44 10002-43 8 600-2000 8 10002-46 10002-45
View Complete Details
Ask Latest Price & Details
Color Matching Cabinet

Color Matching Cabinet
₹ 500 /Piece Get Latest Price
  • Driven Type Electric
  • Color Output Black & White
  • Frequency 50HZ
  • Operation on 230V AC Mains
  • Phase Single Phase
Color can be essential to your products. It cannot assessed only with color measuring instruments. It has to be finally approved with your eye. CI light booth offers you a standard viewing environment so that you can assess color at consistent and international agreed environment. Each light source is controlled by individual self illuminated switches. The total system run time is measured by a hour meter.OPTIONALS : White background insertBlack background insertSpare light sourcesAuto timer for individual light sources.Stand for placing panels at a required angle.
View Complete Details
Ask Latest Price & Details
Vertical Gelation Timer

Vertical Gelation Timer
₹ 100 /Piece Get Latest Price
  • Power 230V, 50Hz Ac. Single Phase
  • Timer Range Max. 99.59 Hours
  • Stroke Length 13mm
  • Peddles As per Standards
  • Working Temp. Range + 15 Deg. C TO 50 Deg. C
  • Sample Temp. Range UPTO 300 Deg. C (To be heated externally)
  • Load 100 W
VERTICAL GELATION TIMER A Simple yet, highly accurate device for determination of gelation time of various chemical and pharmaceutical products/ formulations. The instruments is designed as per various international guidlines. IT consits of a plunger with fixed surface area moving up and down in the sample. When the sample begins to gel, it hindrance is determined as the gelation time. APPLICATION: For Automatic Determination of Gelation times/pot life of various resins like : Unsaturated polyster Resins, Epoxy Resins, Acrylic Resins, PU Resins, Silicone Resins and similar reaction resins.COMPLIANCES BS 5350 B5; BS 3532 K; BS 3815 K; BS 5617; BS 2782-8, DIN 16 945, DIN 16 916 and EN 14022. MODELS VGT-1 : With a stroke rate of 1 stroke/min VGT-6 : With a stroke rate of 6 stroke/min VGT-10 : With a stroke rate of 10 stroke/min Standard Specifications Timer Range : MAX. 9999.59. HOURS Stroke Length : 10/13mm Paddels : 22 DIA ; 19 DIA and 16 DIA. as per test standard. Working Temp. Range : + 15C TO 50C Sample Temp. Range : UPTO 300C (With bath or block) Load : 100 w. POWER : 230 V, 50Hz Ac. Single phase. Optional Accessories A. High Temperature Oil Bath - A die pressed Bath with digital temperature control and motorised stirring for uniformity.Can Accommodate upto 3 VGT (S) B. SS Test plungers -16/19/22 dia C. Glass Test Plungers -16/19/22 dia D. Aluminium Test Plungers E. Glass Sample Cups F. Liquid free, mental heating block for single test
View Complete Details
Ask Latest Price & Details
Sag Index Applicator

Sag Index Applicator
₹ 500 /Piece Get Latest Price
  • Designed For Sag Resistance Evaluation
  • Depths 50, 75, 100, 125, 150, 175 & 200 Microns
  • Material Aluminum
  • Surface Polished
  • Uses Industrial
SAG INDEXThis applicator is specially designed for sag resistance evaluation. Made of high grade Stainless steel, hence Corrosion resistant, Easy to clean, and not affected by any mild acids or base elements. It has 7 narrow slots/notches (gaps) machined with progressive thickness in increments to depth. Confirms to ASTM D 4400, ASTM D 2801 Size: 50, 75, 100, 125, 150, 175, 200 micronsSize: 250, 275, 300, 325, 350, 375, 400 microns
View Complete Details
Ask Latest Price & Details
Four Sided Film Applicator

Four Sided Film Applicator
₹ 500 /Piece Get Latest Price
  • Material Stainless Steel
  • Standard ASTM D823, 1084
  • Rotating 90 Degree
  • Features Corrosion Resistant, Easy to Clean
  • Package Safe Package
FOUR SIDED APPLICATOR Combining four Pre-defined application sides in one unit. Also Known as PRISM FILM APPLICATOR Made of Stainless Steel. They are available in film widths of 60mm, 90mm, and 300mm, which Provides excellent results on firm and smooth and relatively solid substrates. By simply rotating through 90, the next gap size is placed on the test surface. It is Corrosion resistant, Easy to clean, and not affected by any mild acids or base elements. Confirms to ASTM D823, 1084 With any of following gaps Supplied in a deluxe wooden box along with confirmatory certificate. Size 60mm 90mm 300mm 30-60-90-120 10017-00 10017-05 10017-10 50-75-100-125 10017-01 10017-06 10017-11 25-50-75-100 10017-02 10017-07 10017-12 50-100-150-200 10017-03 10017-08 10017-13 100-150-200-250 10017-04 10017-09 10017-14 4 gaps as desired * Calibration Certification tradeable to NPL 10017-20

Details

Size 60mm                     90mm                 300mm
30-60-90-120  10017-00 10017-05 10017-08
50-75-100-125  10017-001 10017-06 10017-09
50-100-150-200  10017-002  10017-07   10017-10
* Other user selectable sizes on request only.
* Calibration Certification tradeable to NPL 10015-30
View Complete Details
Ask Latest Price & Details
Hegman Gauge

Hegman Gauge
₹ 3,000 - ₹ 10,000 /Piece Get Latest Price
  • Type Double channel with scraper
  • Standard Is: 101, BS:3900
  • Made of Hardened Stainless Steel
  • Pack Type Wooden Carrying Case
  • Spare Scraper for Gauge
To find the grinding quality of solid materials in coatings, pigments inks, food formulation etc. Made of hardened stainless steel, Confirming to Is: 101, BS:3900, Double channel with scraper.complete in a wooden carrying case / box with manual 0- 100 microns 0 - 50 microns 0 - 25 microns
View Complete Details
Ask Latest Price & Details
Coating Thickness Gauge

Coating Thickness Gauge
₹ 2 - ₹ 25,000 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Material Alloy Steel
  • Certification ISI Certified
  • Application Laboratory
  • Feature Easy To Fit, Robust Construction
  • Automatic Grade Automatic
  • Display Digital
View Complete Details
Ask Latest Price & Details
Tubular Impact Tester

Tubular Impact Tester
₹ 500 /Piece Get Latest Price
  • Packaging Type Wooden Box
  • Working Capacity 10-50kg/h
  • Usage Industrial
  • Material Mild Steel
  • Finishing Polished
  • Specialities Rust Proof, Long Life
Surface coatings are regularly subjected to damage by impact. This instrument provides proper evaluation of the coating resistance to impact by falling weight method.The instrument consists of a graduated (in both Cm and Inches) vertical seamless light weight aluminum tube, mounted on a heavy solid base. This tube acts as a guide for a pre-determined weight with indenter & handle, and an adjustable weight holding ring.The height of fall, means the force of impact can be altered by adjusting the ring guide from variable heights up to 1 meter onto the sample panel firmly placed on the base plate. The force of impact can be increased or decreased by replacing the falling weights.All clamping arrangements are so designed to hold the guide tube firmly, without scratching the guide tube.The basic instrument has been designed as per ASTM D 2794 with Ball indentor size of 16mm, falling ball weight 2lbs.BS 3900-E13 /ISO 6272 with Ball indentor size of 20mm, falling ball weight 1 kg.Conformity to other standards can also be provided on request.APPLICATIONSIt is used in various fields like:Paints, Plating, Plastics, Varnishes, Plastic coatings, Resins composites Coil coatings Laminations
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us