We are acknowledged for maintaining transparency in our business operations and thus we offer only secured payment processing methods. We have a skilled team of quality experts that stringently checks each and every product at different stages.

Features :

• Used for lifting & handling of steel plates, heavy block & castings as well as heavy round or cylindrical parts.
• The 1 : 3 safety factor of the recommended load to the Test load ensures use at optimal working conditions even with Substantial air gaps & surface conditions.
• Compact design, strong magnetic pull, total work safety
• Easy operated lever for ON-OFF.
• Spring loaded block at side for safety feature.
• Suitable for Flat & Round jobs.
• No damage on job during operation.

Independent Lathe Chucks are built specially for heavy duty and strong grips. Bodies of Semi-Steel are made from selected material. Brinel hardness is kept to the standard ratio. The body is grounded finished.

Features

• Reversible gripping jaws robustly proportioned care hardness and ground for precision work position.

• All gripping jaws individually tested for Rack well hardness between 55-60 to ensure reduced wear & tear.

• All gripping jaws accurately ground to give maximum bearing surfaces.

• Screws are made from tested materials and quality as double bearing type to ensure long life.

• Operating screws tested to Rockwell hardness of 30 to 35.

• Jaws and Screws are made in ACME thread.
• Body of chucks made from graded casting.

We have well-organized warehouse that is divided into specified areas according to technological operations in order to automate inbound, outbound and in-stock operations. This helps us in making quick deliveries in the shortest time span. Interested buyers can place orders with us, timely delivery of the same are our foremost concern.

Details :

• Bench Centre is ideal for checking of run-out, concentricity. Parallelism and axial run out of components.
• The Base of Bench Centre and its heads are artifically stress Relieved.
• One of the centre is spring loaded to ensure uniform pressure while holding work pieces and easy loading and unloading without disturbing the accuracy of centres.
• Both heads are adjustable to the required position easy and quick setting of the required distance between centres.
• The heavy duty bed is provided with two T-Slots, Parallel to each other.
• Base of the Bench Centre is made of close grained casting and finished to high degree of accuracy by hand scrapping.

Capturing the market with our exceptional product range, we are located in Delhi(India) and cater to the wide market. As we take complete care of the products that we offer, we make excellent arrangements for their storage as well. Thus, there are minimal chances of damage at buyer's end.

Features :

• Used for checking heavy and odd shaped round jobs.
• Perfectly matched pair having accuracy 0.005mm.
• Include angle of roller is 90.
• Standard bearings are used which are replaceable.
• Jobs don't get damaged due to bearing on top.
• Special sizes suitable for different diameter can also be manufactured.

Our chucks are manufactured at a most sophisticated plant well equipped with modern CNC machines and with updated measuring instruments. Strict quality control measures applied from raw materials purchase, its inspection, machining, heat treatment, fitting, final inspection and despatch assure international level quality to the satisfaction of our valued customers. This catalogue contains description of full range of manually operated chucks available with us.
No doubt CNC machines have become popular in these days, but still manually operated chucks form a major chunk in the industries because a lot of development has been made in Tooling Systems which can be used on conventional machines which help in obtaining more production with minimum of cost which is the need of the day. So the customer expects following features from manually operated Self centring Chucks :

• Economy
• High Accuracy
• High Gripping Power
• Long Service Life
• Safety

Continuous Research & Development at has helped to fulfill the above mentioned expectations. Improvements are being made from time to time so that our customers get best value for their money.We offer manually operated self centring chucks with :

• Cast Iron Bodies
• Steel Bodies
• Spheroidal Graphite (SG) Iron Bodies

Chucks with Cast Iron Bodies are economical but their only limitation is that the same cannot be used at high rotational speeds. However where high rotational speed is required, Steel Body Chucks are recommended.
We have tried our best to include every information regarding the manually operated self centring chucks available with us. The chuck sizes and mountings specified in the tables of dimensions represent the popular requirement. Due to continuous Research & Development, the dimensions in tables can be changed without prior notice. Variations in Sizes and Special type of Jaws can be available on request.

Customer satisfaction is our utmost priority due to which we efficiently store the entire batch in the well-structured warehouse till the delivery of the orders to the customers. One can stay assured for high quality of the offered lot as we design and develop it using the best in line raw material and modern work methods. In addition to this, we make sure that the material is sourced from the trusted places only.

Features :

• Used for Grinding, Light Milling, Drilling & Inspection of round & Square Jobs.
• Accuracy for Flatness, Squareness and Parellelism within 0.0005 mm upto 6"L & 0.001mm for 8"L of "V"block.
• The bigger V angle &bottom holding surface are equipped with hardened strips for wear resistance.
• Uniform and strong magnetic pull to all three magnetic surfaces Top, Bottom & V face.
• Hardness of V face is 60+2Rc.
• Powder Coated.
• Easy ON-OFF facility.
• 120o "V" angle also available.

This chuck is available with 3 jaws only and is referred as CRC-3. This chuck is similar to Normal Standard Chuck. The only difference is that the gripping portion of jaws have serrations & rod of Operating key is longer. This is done to obtain maximum grip on crankshaft. One set of reverse Jaws, Mounting bolts, Operating Key and inspection report is provided with each chuck.

Keeping in compliance with the international quality standards, the raw material used to manufacture the product is of high quality due to which we are capable of delivering only quality products. We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit.

Features :

• Holding device for surface grinding machine, Tool & cutter grinder, Spark erosion machines.
• Accuracy as perIS : 4816 - 1987.
• Assembled with powerful Magnets.
• Poles individually magnetized for full loading power.
• Magnetic pull is 40-70% more than IS specification.
• Bottom plate has suitable extension to clamp on table.
• Easy operated ON-OFF lever.

We manufacture, export and supply pristineCast Iron Lapping Plates. Fabricated using closed grain graded casting as per IS 210:1993 confirming to Grade FG- 220, these Cast Iron Lapping Plates ensure precision lapping of components of various sizes. These components are lapped using lapping powder of different grits to achieve finish and accuracy. Available in different specifications, our complete assortment of Cast Iron Lapping Plates complies with set industry standards and are quality approved by the authorities. These lapping plates are supplied with calibration certificate traceable to National Physical Laboratory (NPL, Govt of India) New Delhi

Attributes:

• Ideal for accurate hand lapping of various materials like nylon, plastics, ceramics and other non-ferrous material
• Available in round and rectangular sizes and have 3 mm wide and 3 mm deep serrations on working surface equally spaced at 25 mm
• Standard Size and accuracy of Cast Iron Lapping Plates as per IS : 2285:2003, Grade 1

These plates are of close grained cast iron. They are amply ribbed to minimize deflection under load. The composition of the metal, the depth and cross-section of the ribs and the thickness of the plate are designed to conform to the deflection limits specified in IS 2285 -1963.
Surface plates are manufactured to two tolerance standards. - Grade-I and Grade-II. Grade-I plates are more precise than Grade-II plates. The deviation in flatness for Grade-I and Grade -II plates for sizes upto and including 2000 x 1000 mm are as prescribed in IS 2285-1963.
Grade-1 plates are artificially seasoned.They are hand scraped to achieve maximum local deviation from flatness of 5 microns over any length of 300 mm at any points on the working face , in plates of 630 X 400 mm and larger. Aspecial scraping technique is used to achieve a uniform distribution of load bearing points and oil pockets. An average of 15-20 load bearing points , after finish scraping , is standard. This finish scraping technique ensures that the area of the load bearing points increases after the intial dulling of the high points. This guarantees a long working life, at the required accuracies. Grade-II plates are accurately machined to get the requisite flatness.

Standard Accessories :

• Plates of sizes 1000 X 1000 mm and smaller, are provided with handles. A wooden cover is provided to protect the working face.

Optional Accessories :

• Fabricated mild steel stands, with three leveling screws, are offered for plates upto and including size 1600 X1000 mm.

• Cast Iron Column Floor Stands, each with a leveling screw and nut, are offered as per the scheme :
  
  • A set of five, three for leveling and two for support for 2000 X 1000 mm plate.
  • A set of seven, five for leveling and two for support for 3000 X 1000 mm plate.

Granite Surface Plates meet IS.7327 - 1991 for flatness. Granite surface Plates are manufactured to precision standards using the highest quality granite.

Accuracy :Rigourous quality control inspection is carried out all stages. Final inspection is carried out by a high Precision Computerised Electronic Level.

Accuracy Under Load :Granite Surface Plates are capable of supporting a total normal load of 25 kgs. Per 0.1. Sq. mtr.

Certificate :A certificate of accuracy is supplied with each plate as per IS: 7327 - 1991.

Technical Data :Granite Surface Plates are manufactured in Four Grades. The typical applicaton of these four grades of plates are as under :

• GRADE 00is of laboratory grade. It is specified for precision measurement in gauge rooms and metrology laboratories.
• GRADE 0is of inspection grade. It is specified for general work in quality control.
• GRADE 1is of tool room grade. It is specified for production checking work through the shop.
• GRADE 2is for use in shops for general inspection.

Material :Granite Surface Plates are made from seiect granite with uniform distribution of light and dark constituents. In such granite the minerals are evenly distributed resulting in a homogenous appearance. The following are the representative Properties of our Granites.

Flatness Tolerance :The flatness deviation of a local area of 250 mm X 250 mm of the working surface shall not exceed :

• 3.5 m for plates of Grade 00
• 7 m for plates of Grade 0
• 15 m for plates of Grade 1
• 30 m for plates of Grade 2

Advantages :

• Granite has one of the lowest cu - Efficients of expansion amongst known materials :
• Granite does not rust.
• It may chip, but will not develop a burr.
• It is easy to keep clean.

Granite Surface Plate Stands :These are fabricated of heavy angle iron and reinforced to ensure rigidity. The stands are designed to withstand the weight of the granite surface plates and are supplied with 3 levelling screws for leveling the granite surface plates. To meet special requirements, we offer bigger size of Granite surface plate with extra thickness, Comparator stands, Granite straight edges, Granite master squares and master cylinder. Detail on these products will be forwarded on request.

As we have a spacious warehouse, we are capable of meeting the urgent requirements of the clients. Moreover, we never go out of stock and thus we maintain year round availability. For us making delivery of consignments is easy, as we have a productive logistic network that enables to reach buyers within the promised time.

Features :

• Used for collecting ferrous particles & scrap from floor space.
• Good quality strong magnets are used.
• Wheels for easy movement on floor.
• Particles are released jast by creation gap between bottom plate & magnetic assembly by using foot.
• 42" long handle for easy working.

This chuck is available with 3 jaws and is reffered as LOC-3. This is light weight lever operated chuck is specially designed for use by craftsmen on instruments, watchmaker's lathe, bench lathes, grinding machine as well as on small sized machine tools. The body of this chuck is made out of SG Iron to avoid breakage due to slim design of body. The grip of these chucks is limited as the design is without gearing. However this feature has advantage aiso. The sensitive movement avoids the danger of crushing and have great versatility for gripping fragile materials and components. Knurled ring, which operates the jaws, give ample grip for light work when hand operated, but a lever is provided for use where a stronger grip is required.

We have state-of-the-art warehouse that is well-maintained by the storage experts. They ensure that our wide array of products is kept safe before making the final dispatch. Rely on us and place orders with us, timely deliveries will be straight to your doorstep!

We are acknowledged for maintaining transparency in our business operations and thus we offer only secured payment processing methods. We have a skilled team of quality experts that stringently checks each and every product at different stages.

Features :

• Used for lifting & handling of steel plates, heavy block & castings as well as heavy round or cylindrical parts.
• The 1 : 3 safety factor of the recommended load to the Test load ensures use at optimal working conditions even with Substantial air gaps & surface conditions.
• Compact design, strong magnetic pull, total work safety
• Easy operated lever for ON-OFF.
• Spring loaded block at side for safety feature.
• Suitable for Flat & Round jobs.
• No damage on job during operation.

Independent Lathe Chucks are built specially for heavy duty and strong grips. Bodies of Semi-Steel are made from selected material. Brinel hardness is kept to the standard ratio. The body is grounded finished.

Features

• Reversible gripping jaws robustly proportioned care hardness and ground for precision work position.

• All gripping jaws individually tested for Rack well hardness between 55-60 to ensure reduced wear & tear.

• All gripping jaws accurately ground to give maximum bearing surfaces.

• Screws are made from tested materials and quality as double bearing type to ensure long life.

• Operating screws tested to Rockwell hardness of 30 to 35.

• Jaws and Screws are made in ACME thread.
• Body of chucks made from graded casting.

We have well-organized warehouse that is divided into specified areas according to technological operations in order to automate inbound, outbound and in-stock operations. This helps us in making quick deliveries in the shortest time span. Interested buyers can place orders with us, timely delivery of the same are our foremost concern.

Details :

• Bench Centre is ideal for checking of run-out, concentricity. Parallelism and axial run out of components.
• The Base of Bench Centre and its heads are artifically stress Relieved.
• One of the centre is spring loaded to ensure uniform pressure while holding work pieces and easy loading and unloading without disturbing the accuracy of centres.
• Both heads are adjustable to the required position easy and quick setting of the required distance between centres.
• The heavy duty bed is provided with two T-Slots, Parallel to each other.
• Base of the Bench Centre is made of close grained casting and finished to high degree of accuracy by hand scrapping.

Capturing the market with our exceptional product range, we are located in Delhi(India) and cater to the wide market. As we take complete care of the products that we offer, we make excellent arrangements for their storage as well. Thus, there are minimal chances of damage at buyer's end.

Features :

• Used for checking heavy and odd shaped round jobs.
• Perfectly matched pair having accuracy 0.005mm.
• Include angle of roller is 90.
• Standard bearings are used which are replaceable.
• Jobs don't get damaged due to bearing on top.
• Special sizes suitable for different diameter can also be manufactured.

Our chucks are manufactured at a most sophisticated plant well equipped with modern CNC machines and with updated measuring instruments. Strict quality control measures applied from raw materials purchase, its inspection, machining, heat treatment, fitting, final inspection and despatch assure international level quality to the satisfaction of our valued customers. This catalogue contains description of full range of manually operated chucks available with us.
No doubt CNC machines have become popular in these days, but still manually operated chucks form a major chunk in the industries because a lot of development has been made in Tooling Systems which can be used on conventional machines which help in obtaining more production with minimum of cost which is the need of the day. So the customer expects following features from manually operated Self centring Chucks :

• Economy
• High Accuracy
• High Gripping Power
• Long Service Life
• Safety

Continuous Research & Development at has helped to fulfill the above mentioned expectations. Improvements are being made from time to time so that our customers get best value for their money.We offer manually operated self centring chucks with :

• Cast Iron Bodies
• Steel Bodies
• Spheroidal Graphite (SG) Iron Bodies

Chucks with Cast Iron Bodies are economical but their only limitation is that the same cannot be used at high rotational speeds. However where high rotational speed is required, Steel Body Chucks are recommended.
We have tried our best to include every information regarding the manually operated self centring chucks available with us. The chuck sizes and mountings specified in the tables of dimensions represent the popular requirement. Due to continuous Research & Development, the dimensions in tables can be changed without prior notice. Variations in Sizes and Special type of Jaws can be available on request.

Customer satisfaction is our utmost priority due to which we efficiently store the entire batch in the well-structured warehouse till the delivery of the orders to the customers. One can stay assured for high quality of the offered lot as we design and develop it using the best in line raw material and modern work methods. In addition to this, we make sure that the material is sourced from the trusted places only.

Features :

• Used for Grinding, Light Milling, Drilling & Inspection of round & Square Jobs.
• Accuracy for Flatness, Squareness and Parellelism within 0.0005 mm upto 6"L & 0.001mm for 8"L of "V"block.
• The bigger V angle &bottom holding surface are equipped with hardened strips for wear resistance.
• Uniform and strong magnetic pull to all three magnetic surfaces Top, Bottom & V face.
• Hardness of V face is 60+2Rc.
• Powder Coated.
• Easy ON-OFF facility.
• 120o "V" angle also available.

This chuck is available with 3 jaws only and is referred as CRC-3. This chuck is similar to Normal Standard Chuck. The only difference is that the gripping portion of jaws have serrations & rod of Operating key is longer. This is done to obtain maximum grip on crankshaft. One set of reverse Jaws, Mounting bolts, Operating Key and inspection report is provided with each chuck.

Keeping in compliance with the international quality standards, the raw material used to manufacture the product is of high quality due to which we are capable of delivering only quality products. We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit.

Features :

• Holding device for surface grinding machine, Tool & cutter grinder, Spark erosion machines.
• Accuracy as perIS : 4816 - 1987.
• Assembled with powerful Magnets.
• Poles individually magnetized for full loading power.
• Magnetic pull is 40-70% more than IS specification.
• Bottom plate has suitable extension to clamp on table.
• Easy operated ON-OFF lever.

We manufacture, export and supply pristineCast Iron Lapping Plates. Fabricated using closed grain graded casting as per IS 210:1993 confirming to Grade FG- 220, these Cast Iron Lapping Plates ensure precision lapping of components of various sizes. These components are lapped using lapping powder of different grits to achieve finish and accuracy. Available in different specifications, our complete assortment of Cast Iron Lapping Plates complies with set industry standards and are quality approved by the authorities. These lapping plates are supplied with calibration certificate traceable to National Physical Laboratory (NPL, Govt of India) New Delhi

Attributes:

• Ideal for accurate hand lapping of various materials like nylon, plastics, ceramics and other non-ferrous material
• Available in round and rectangular sizes and have 3 mm wide and 3 mm deep serrations on working surface equally spaced at 25 mm
• Standard Size and accuracy of Cast Iron Lapping Plates as per IS : 2285:2003, Grade 1

These plates are of close grained cast iron. They are amply ribbed to minimize deflection under load. The composition of the metal, the depth and cross-section of the ribs and the thickness of the plate are designed to conform to the deflection limits specified in IS 2285 -1963.
Surface plates are manufactured to two tolerance standards. - Grade-I and Grade-II. Grade-I plates are more precise than Grade-II plates. The deviation in flatness for Grade-I and Grade -II plates for sizes upto and including 2000 x 1000 mm are as prescribed in IS 2285-1963.
Grade-1 plates are artificially seasoned.They are hand scraped to achieve maximum local deviation from flatness of 5 microns over any length of 300 mm at any points on the working face , in plates of 630 X 400 mm and larger. Aspecial scraping technique is used to achieve a uniform distribution of load bearing points and oil pockets. An average of 15-20 load bearing points , after finish scraping , is standard. This finish scraping technique ensures that the area of the load bearing points increases after the intial dulling of the high points. This guarantees a long working life, at the required accuracies. Grade-II plates are accurately machined to get the requisite flatness.

Standard Accessories :

• Plates of sizes 1000 X 1000 mm and smaller, are provided with handles. A wooden cover is provided to protect the working face.

Optional Accessories :

• Fabricated mild steel stands, with three leveling screws, are offered for plates upto and including size 1600 X1000 mm.

• Cast Iron Column Floor Stands, each with a leveling screw and nut, are offered as per the scheme :
  
  • A set of five, three for leveling and two for support for 2000 X 1000 mm plate.
  • A set of seven, five for leveling and two for support for 3000 X 1000 mm plate.

Granite Surface Plates meet IS.7327 - 1991 for flatness. Granite surface Plates are manufactured to precision standards using the highest quality granite.

Accuracy :Rigourous quality control inspection is carried out all stages. Final inspection is carried out by a high Precision Computerised Electronic Level.

Accuracy Under Load :Granite Surface Plates are capable of supporting a total normal load of 25 kgs. Per 0.1. Sq. mtr.

Certificate :A certificate of accuracy is supplied with each plate as per IS: 7327 - 1991.

Technical Data :Granite Surface Plates are manufactured in Four Grades. The typical applicaton of these four grades of plates are as under :

• GRADE 00is of laboratory grade. It is specified for precision measurement in gauge rooms and metrology laboratories.
• GRADE 0is of inspection grade. It is specified for general work in quality control.
• GRADE 1is of tool room grade. It is specified for production checking work through the shop.
• GRADE 2is for use in shops for general inspection.

Material :Granite Surface Plates are made from seiect granite with uniform distribution of light and dark constituents. In such granite the minerals are evenly distributed resulting in a homogenous appearance. The following are the representative Properties of our Granites.

Flatness Tolerance :The flatness deviation of a local area of 250 mm X 250 mm of the working surface shall not exceed :

• 3.5 m for plates of Grade 00
• 7 m for plates of Grade 0
• 15 m for plates of Grade 1
• 30 m for plates of Grade 2

Advantages :

• Granite has one of the lowest cu - Efficients of expansion amongst known materials :
• Granite does not rust.
• It may chip, but will not develop a burr.
• It is easy to keep clean.

Granite Surface Plate Stands :These are fabricated of heavy angle iron and reinforced to ensure rigidity. The stands are designed to withstand the weight of the granite surface plates and are supplied with 3 levelling screws for leveling the granite surface plates. To meet special requirements, we offer bigger size of Granite surface plate with extra thickness, Comparator stands, Granite straight edges, Granite master squares and master cylinder. Detail on these products will be forwarded on request.

As we have a spacious warehouse, we are capable of meeting the urgent requirements of the clients. Moreover, we never go out of stock and thus we maintain year round availability. For us making delivery of consignments is easy, as we have a productive logistic network that enables to reach buyers within the promised time.

Features :

• Used for collecting ferrous particles & scrap from floor space.
• Good quality strong magnets are used.
• Wheels for easy movement on floor.
• Particles are released jast by creation gap between bottom plate & magnetic assembly by using foot.
• 42" long handle for easy working.

This chuck is available with 3 jaws and is reffered as LOC-3. This is light weight lever operated chuck is specially designed for use by craftsmen on instruments, watchmaker's lathe, bench lathes, grinding machine as well as on small sized machine tools. The body of this chuck is made out of SG Iron to avoid breakage due to slim design of body. The grip of these chucks is limited as the design is without gearing. However this feature has advantage aiso. The sensitive movement avoids the danger of crushing and have great versatility for gripping fragile materials and components. Knurled ring, which operates the jaws, give ample grip for light work when hand operated, but a lever is provided for use where a stronger grip is required.

We have state-of-the-art warehouse that is well-maintained by the storage experts. They ensure that our wide array of products is kept safe before making the final dispatch. Rely on us and place orders with us, timely deliveries will be straight to your doorstep!