Casing And Basin:- Imported Chirr Or Pine Woods Are Used In Casing Structures .Wood Is Treated For Working In Water And Bad Weather.Strucuter Is Covered With Asbestos Sheet Or Frp Sheet .

Supporting Structures:- Chemically Treated Wood Used In Supporting Structures For Long Life.

Electrical Fan Motor:- Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm , Long Shaft Fitment And Vertical Mounted For Better Airlow , Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .

Gear Reducer/Vbelt Arrangement :- Some Models Comes With Gear Reducer /Vbelt Drive ReduceRpm , Vibration And Noise Polution

Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or Vbelt Arrangement For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum, Frp, And Engineering Polymer

Water Distribution Systems:-There Is No Requirement For Water Pressure Just Simply Pour Water On Upper Side Mounted Water Trough And Flower Type Nozzles Splash Water Each Space Of Fills Packing .

V Bar Type Or Treated Wooden Fills Packings:- Vbar Diamond Punch Type Fills/Treated Imported Woods Resist In Scale And Atmsospheric Polution Formation And Constantly Performed Cooling Efficiency .V Bar /Wooden Mounted With Stainless Steel/Hotdipped Galvanised M.S.Steel/Frp Gridd

Canopy:- Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .

Z Type Or Wooden Eleminator:- Z Type Pvc Or Wooden Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life.

Out Side Z Type Or Wooden Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower Saves Water And Cleanness Near Cooling Tower

Casing And Basin:- The Gelcoated Shell And Basin Of Cooling Tower Is Robust But It Is Light Weight Made By Engineering Polymer Grp [Glass Fibre Reinforced Polymer].We Are Using Premium Raw Goods To Makes Structural Strength And Withstand Capacity.It Is Repairable By Skilled Person

Supporting Structures:- All Supporting Structures Made By Mild Steel Angles , Flats And Round Best Available In Market .It Is Treated With Hot Dip Galvanizing /Epoxy Coated After Fabrication Work Done. Treatment Gives Long Life And Protection From Rust And Scale Formation.

Electrical Fan Motor:- Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm , Long Shaft Fitment And Vertical Mounted For Better Airlow , Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .

Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or Vbelt Arrangement For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum, Frp, And Engineering Polymer

Water Distribution Systems:- Two Proven Design Water Distribution System Available .

1] Static Big Orifice Nozzles

Fills Packings:- Honey Comb Designed Fills Packing Make Heat Dissipation Through Counter Contact Between Air And Hot Water To Perform Maximum Cool Down Hot Water Temperature .Fills Available In Conventional , Double-Edge Folded , Abs And Ips

Canopy:-Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .

Eleminator:- Pvc Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life.

Frp In Built Legs:-Most Of Our Units Has Inbuilt Legs For Long Life And Protected From Rust And Scale Formation.

Out Side Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower Saves Water And Cleanness Near Cooling Tower

Casing And Basin:- The Gelcoated Shell And Basin Of Cooling Tower Is Robust But It Is Light Weight Made By Engineering Polymer Grp [Glass Fibre Reinforced Polymer].We Are Using Premium Raw Goods To Makes Structural Strength And Withstand Capacity.It Is Repairable By Skilled Person

Supporting Structures:- All Supporting Structures Made By Mild Steel Angles , Flats And Round Best Available In Market .It Is Treated With Hot Dip Galvanizing /Epoxy Coated After Fabrication Work Done. Treatment Gives Long Life And Protection From Rust And Scale Formation.

Electrical Fan Motor:- Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm , Long Shaft Fitment And Vertical Mounted For Better Airlow , Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .

Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or Vbelt Arrangement For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum, Frp, And Engineering Polymer

Water Distribution Systems:-There Is No Requirement For Water Pressure Just Simply Pour Water On Upper Side Mounted Water Trough And Flower Type Nozzles Splash Water Each Space Of Fills Packing .

V Bar Type Fills Packings:- Vbar Diamond Punch Type Fills Resist In Scale And Atmsospheric Polution Formation And Constantly Performed Cooling Efficiency .V Bar Mounted With Stainless Steel/Hotdipped Galvanised M.S.Steel/Frp Gridd

Canopy:- Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .

Z Type Eleminator:- Z Type Pvc Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life.

Out Side Z Type Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower Saves Water And Cleanness Near Cooling Tower

LOUVERS:- the GELCOATED LOUVERS of cooling tower is robust but it is lIght weight made by engineering polymer GRP [GLASS FIBRE REINFORCED POLYMER].we are using premium raw goods to makes structural strength and withstand capacity.it is repairable by skilled person

SUPPORTING STRUCTURES:- all supporting structures made by mild steel angles , flats and round best available in market .it is treated with hot dip galvanizing /epoxy coated after fabrication work done. Treatment gives long life and protection from rust and scale formation.

G.I.HEADER AND BRANCHES:- NX-SERIES HAS GI PIPE HEADER AND BRANCHES ARRANGEMENT IS WORKING LONG LIFE IN WORST WEATHER.

NOZZLES:- NYLON-6 OR ENGINEERING POLYMER JET CONE NOZZLES FITTED WITH G.I.PIPES SPLASH WATER EACH AND EVERY SPACE OF COOLING TOWER MAKES COOLING EFFECTIVELY

Casing And Basin:- The Gelcoated Shell And Basin Of Cooling Tower Is Robust But It Is Light Weight Made By Engineering Polymer Grp [Glass Fibre Reinforced Polymer].We Are Using Premium Raw Goods To Makes Structural Strength And Withstand Capacity.It Is Repairable By Skilled Person

Supporting Structures:- All Supporting Structures Made By Mild Steel Angles , Flats And Round Best Available In Market .It Is Treated With Hot Dip Galvanizing /Epoxy Coated After Fabrication Work Done. Treatment Gives Long Life And Protection From Rust And Scale Formation.

Electrical Fan Motor:- Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm , Long Shaft Fitment And Vertical Mounted For Better Airlow , Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .

Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or Vbelt Arrangement For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum, Frp, And Engineering Polymer

Water Distribution Systems:- Two Proven Design Water Distribution System Available.

• Static Big Orifice Nozzles
• Self Rotating Sprinkler

Fills Packings:- Honey Comb Designed Fills Packing Make Heat Dissipation Through Counter Contact Between Air And Hot Water To Perform Maximum Cool Down Hot Water Temperature .Fills Available In Conventional , Double-Edge Folded , Abs And Ips

Canopy:- Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .

Eleminator:- Pvc Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life.

Frp In Built Legs:- Most Of Our Units Has Inbuilt Legs For Long Life And Protected From Rust And Scale Formation.

Out Side Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower Saves Water And Cleanness Near Cooling Tower

the GELCOATED LOUVERS of cooling tower is robust but it is lIght weight made by engineering polymer GRP [GLASS FIBRE REINFORCED POLYMER].we are using premium raw goods to makes structural strength and withstand capacity.it is repairable by skilled personall supporting structures made by mild steel angles , flats and round best available in market .it is treated with hot dip galvanizing epoxy coated after fabrication work done. Treatment gives long life and protection from rust and scale formation.

We are offering MX timber cross flow cooling tower.

DIRECT DRIVEN FAN: ENGINEERED POLYMER /HIGH GRADE POLYMER/ FRP FAN OPTION AVAILBLE LOW RPM AND WEIGHT SAVES ENGERGY COST AXIAL FLOW DESIGN THROW MAXIMUM AIR THROW ADJUSTABLE PITCH TO CONTROL AIR FLOW. 2 ) MOTOR ENERGY EFFIECIENT MOTORSPECIALLY DESIGNED FOR COOLING TOWER IP-55 WEATHER PROOFING AND 'F' CLASS INSULATION TO PROTECT FROM WEATHER , HEAT AND MOISTER TESC [TOTAL ENCLOSED SURFACE COOLED] LOWER RPM FOR REDUCES VIBRATION / NOISE LEVEL . FLANGE MOUNTED TOPSIDE LOCATED VERTICALLY HOLD ELEMINATS GEAR DRIVES 'V'BELT ARRANGEMENT. NO REGULAR MAINTANANCE REQUIRE 3) FILLS PACKING : HONEY COMB PVC / ABS / IPS / DOUBLE EDGE FOLDED FILLS AVAILABLE FILLS OPTION ARE AVAILABLE AS PER CLIENT REQUIRMENT CROSS PATTERN MAKES MAXIMUM AIR CONTACT AND LOWEST WATER LOSSES 4) SELF ROTATING SPRINKLER ALUMINIUM / ENGINEERED POLYMER / STAINLESS STEEL OPTION AVAILABLE LOWER RPM FOR SMOOTH ROATATION AND DISTRIBUTES WATER UNIFORMLY DOUBLE SEALED 'Z' BALL BEARING FOR LONG LASTING PERFORMANCE PVC / UPVC ARM PIPE HOLES ARRANGEMENT DROPS WATER EACH PITCH OF FILLS PACKING STAINLESS STEEL SHAFT WORKS FOR LONG LAST 5) FRP CASING GELCOATED OUTSIDE GIVES FABULOUS APPEAREANCE AND PROTECT FROM UV /UB RAYS MADE FROM HIGH GRADE FRP RAW GOODS FOR DURABILITY CASING MOUNTED WITH HDG M.S.STEEL PERFORM BEST IN WORSE WEATHER CONDITION 6) OTHER FRAME WORKS HOT DIP GALVANISED STRUCTURES AND SUPPORTS DESIGNED FOR DURABILITY IT PERFORM IN WATER AND WORSE WEATHER CONDITION FOR LONG TIME SPAN USER FRIENDLY DESIGN FOR EASENESS OF REPAIR/REPLACE ANY PARTS /SPARES BY ANY SKILLED PERSON 7) HARDWARE STANDARD SIZED HARDWARE FOR LONG LIFE. GALVANISED / STAINLESS STEEL / ZINKPLATED OPTION AVAILABLE Bottle shapedcooling tower designalso known as thecooling tower FRPinduced draft, we manufacture these products of better quality material than we do ascooling towers bottle designavailable at a very reasonable price. These are qualitative, long lasting and is available in various specifications. AVAILABLE 5 TR TO UUNLIMITED CAPACITY [ ONE CELL/ MULTI CELL]

1. DIRECT DRIVEN FAN TO ELEMINATE GEARDRIVE/ V-BELT ARRANGEMENT
2. ALUMINIUM ALLOYS / FIBRE GLASS / ENGINEERED POLYMER. OPTION AVAILABLE
   
3. LOW WEIGHT / HIGHER CFM / ENERGY SAVER FAN
4. AXIAL FLOW DESIGN FOR AIR THROW MORE .
5. ADJUSTABLE BLADES TO CONTROL AIR VOLUME .
6. GUNMETAL BUSH AVAILABLE FOR EASENESS TO REMOVE FAN

1. SPECIAL DESIGNED FLANGE MOUNTED / FOOT MOUNTED MOTOR USE IN CROSS-FLOW COOLING TOWER.
2. TESC[ TOTALY ENCLOSED SURFACE COOLED' /LONG SHAFTED AND IP-55 WEATHER PROOF MOTOR TO PERFORM IN WORSE WEATHER
3. "F' CLASS INSULATION TO PROTECT FORM EXCESS HEAT
4. LOWER RPM REDUCE VIBRATION / NOISE LEVEL AND MAINTAINANCE COST

1. PVC 'V' BAR TYPE FILLS PACKING WORKS IN HIGHER POLUTION / TDS / SCALLING FOR LONG LASTING
2. REGULARLY FILLS PACKING CLEANING OR REPLACING IS NOT REQUIRE .
3. STAINLESS STEEL / FRP / HDG GRID FOR PVC' V' BAR
4. EASY TO REMOVE / REPLACE / CLEAN FILLS PACKING
5. IN BULIT 'Z' TYPE LOUVER ELEMINATS WATER LOSSES.

4) FRP CASING / BASIN

1. DOUBLE STRUCTURE FRP AND HDG STEEL SUSTAIN IN WORSE WEATHER
2. GELCOATED SURFACE TO PROTECT IN UV/UB RAYS
3. PREMIUM GRADE FRP RAW GOODS AND STANDARD M.S.STEEL USE FOR BETTER DURABILITY .
4. BASIN SEALED WITH FRP PUTTY AND FRP COATING FOR LEAK PROOFING

5) OTHER SUPPORTING STRUCTURE :

1. STRUCTURE AND SUPPORTS ENGINEERED ROBUST DESIGN FOR DURABILITY
2. STANDARD DULY HOT DIP GALVANISING PROTECT M.S.STEEL FORM RUST
3. EASENESS TO MAINTAIN / REPAIR / REPLACE ANY SPARES .
   

1. NO REQUIREMENT OF WATER PRESSURE ONLY GRAVITY PRESSURE DISTRIBUTES WATER IN UPPER TROUGH.
2. USER CAN MERGE MORE THAN ONE APPLICATION IN COOLIONG TOWER
3. FLOWER TYPE NOZZLES SPLASH WATER UNIFORMLY ON FILLS
4. NOZZLE BIG ORIFICE REDUCES CLOGGING / JAMMING .FROM SCALE / DUST POLUTION

AVAILABLE IN 25TR TO 200TR IN SINGLE CELL, UNLIMITED IN MULTI-CELL
SOME MODEL HAVE UPSIDE AIR-DISCHARGE

Casing And Basin:- Imported Chirr Or Pine Woods Are Used In Casing Structures .Wood Is Treated For Working In Water And Bad Weather.Strucuter Is Covered With Asbestos Sheet Or Frp Sheet .

Supporting Structures:- Chemically Treated Wood Used In Supporting Structures For Long Life.

Electrical Fan Motor:- Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm , Long Shaft Fitment And Vertical Mounted For Better Airlow , Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .

Gear Reducer/Vbelt Arrangement :- Some Models Comes With Gear Reducer /Vbelt Drive ReduceRpm , Vibration And Noise Polution

Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or Vbelt Arrangement For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum, Frp, And Engineering Polymer

Water Distribution Systems:-There Is No Requirement For Water Pressure Just Simply Pour Water On Upper Side Mounted Water Trough And Flower Type Nozzles Splash Water Each Space Of Fills Packing .

V Bar Type Or Treated Wooden Fills Packings:- Vbar Diamond Punch Type Fills/Treated Imported Woods Resist In Scale And Atmsospheric Polution Formation And Constantly Performed Cooling Efficiency .V Bar /Wooden Mounted With Stainless Steel/Hotdipped Galvanised M.S.Steel/Frp Gridd

Canopy:- Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .

Z Type Or Wooden Eleminator:- Z Type Pvc Or Wooden Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life.

Out Side Z Type Or Wooden Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower Saves Water And Cleanness Near Cooling Tower

Casing And Basin:- The Gelcoated Shell And Basin Of Cooling Tower Is Robust But It Is Light Weight Made By Engineering Polymer Grp [Glass Fibre Reinforced Polymer].We Are Using Premium Raw Goods To Makes Structural Strength And Withstand Capacity.It Is Repairable By Skilled Person

Supporting Structures:- All Supporting Structures Made By Mild Steel Angles , Flats And Round Best Available In Market .It Is Treated With Hot Dip Galvanizing /Epoxy Coated After Fabrication Work Done. Treatment Gives Long Life And Protection From Rust And Scale Formation.

Electrical Fan Motor:- Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm , Long Shaft Fitment And Vertical Mounted For Better Airlow , Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .

Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or Vbelt Arrangement For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum, Frp, And Engineering Polymer

Water Distribution Systems:- Two Proven Design Water Distribution System Available .

1] Static Big Orifice Nozzles

Fills Packings:- Honey Comb Designed Fills Packing Make Heat Dissipation Through Counter Contact Between Air And Hot Water To Perform Maximum Cool Down Hot Water Temperature .Fills Available In Conventional , Double-Edge Folded , Abs And Ips

Canopy:-Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .

Eleminator:- Pvc Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life.

Frp In Built Legs:-Most Of Our Units Has Inbuilt Legs For Long Life And Protected From Rust And Scale Formation.

Out Side Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower Saves Water And Cleanness Near Cooling Tower

Casing And Basin:- The Gelcoated Shell And Basin Of Cooling Tower Is Robust But It Is Light Weight Made By Engineering Polymer Grp [Glass Fibre Reinforced Polymer].We Are Using Premium Raw Goods To Makes Structural Strength And Withstand Capacity.It Is Repairable By Skilled Person

Supporting Structures:- All Supporting Structures Made By Mild Steel Angles , Flats And Round Best Available In Market .It Is Treated With Hot Dip Galvanizing /Epoxy Coated After Fabrication Work Done. Treatment Gives Long Life And Protection From Rust And Scale Formation.

Electrical Fan Motor:- Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm , Long Shaft Fitment And Vertical Mounted For Better Airlow , Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .

Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or Vbelt Arrangement For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum, Frp, And Engineering Polymer

Water Distribution Systems:-There Is No Requirement For Water Pressure Just Simply Pour Water On Upper Side Mounted Water Trough And Flower Type Nozzles Splash Water Each Space Of Fills Packing .

V Bar Type Fills Packings:- Vbar Diamond Punch Type Fills Resist In Scale And Atmsospheric Polution Formation And Constantly Performed Cooling Efficiency .V Bar Mounted With Stainless Steel/Hotdipped Galvanised M.S.Steel/Frp Gridd

Canopy:- Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .

Z Type Eleminator:- Z Type Pvc Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life.

Out Side Z Type Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower Saves Water And Cleanness Near Cooling Tower

LOUVERS:- the GELCOATED LOUVERS of cooling tower is robust but it is lIght weight made by engineering polymer GRP [GLASS FIBRE REINFORCED POLYMER].we are using premium raw goods to makes structural strength and withstand capacity.it is repairable by skilled person

SUPPORTING STRUCTURES:- all supporting structures made by mild steel angles , flats and round best available in market .it is treated with hot dip galvanizing /epoxy coated after fabrication work done. Treatment gives long life and protection from rust and scale formation.

G.I.HEADER AND BRANCHES:- NX-SERIES HAS GI PIPE HEADER AND BRANCHES ARRANGEMENT IS WORKING LONG LIFE IN WORST WEATHER.

NOZZLES:- NYLON-6 OR ENGINEERING POLYMER JET CONE NOZZLES FITTED WITH G.I.PIPES SPLASH WATER EACH AND EVERY SPACE OF COOLING TOWER MAKES COOLING EFFECTIVELY

Casing And Basin:- The Gelcoated Shell And Basin Of Cooling Tower Is Robust But It Is Light Weight Made By Engineering Polymer Grp [Glass Fibre Reinforced Polymer].We Are Using Premium Raw Goods To Makes Structural Strength And Withstand Capacity.It Is Repairable By Skilled Person

Supporting Structures:- All Supporting Structures Made By Mild Steel Angles , Flats And Round Best Available In Market .It Is Treated With Hot Dip Galvanizing /Epoxy Coated After Fabrication Work Done. Treatment Gives Long Life And Protection From Rust And Scale Formation.

Electrical Fan Motor:- Elctrical Fan Motor Is Specially Designed For Cooling Tower Application .It Has Low Rpm , Long Shaft Fitment And Vertical Mounted For Better Airlow , Reducing Vibration And Low Noise Polution.Tesc [Total Enclosed Surface Cooled]Insulated Ip-55 Grade With Weather Proof Design Sustain In Bad Weather .

Adjustable Pitched Axial Flow Fan:- Axial Flow Fan Throw Maximum Air At Low Rpm Motor To Give Better Cooling Performance .Direct Driven Fan Eliminates Gear Reducer Drives Or Vbelt Arrangement For Regular Maintenance And Sudden Breakdown .It Is Also Less Vibration And Noise Pollution.Fan Available In Aluminum, Frp, And Engineering Polymer

Water Distribution Systems:- Two Proven Design Water Distribution System Available.

• Static Big Orifice Nozzles
• Self Rotating Sprinkler

Fills Packings:- Honey Comb Designed Fills Packing Make Heat Dissipation Through Counter Contact Between Air And Hot Water To Perform Maximum Cool Down Hot Water Temperature .Fills Available In Conventional , Double-Edge Folded , Abs And Ips

Canopy:- Specially Designed Canopy Protect Electrical Motor From Rain And Sunrays And Give More Life .

Eleminator:- Pvc Eleminator Reduce Water Droplet From Air And Saves Water As Precious Need For Life.

Frp In Built Legs:- Most Of Our Units Has Inbuilt Legs For Long Life And Protected From Rust And Scale Formation.

Out Side Louver Arrangement:- Louvers Arrangement Reducing Water Spill Out From Cooling Tower Saves Water And Cleanness Near Cooling Tower

the GELCOATED LOUVERS of cooling tower is robust but it is lIght weight made by engineering polymer GRP [GLASS FIBRE REINFORCED POLYMER].we are using premium raw goods to makes structural strength and withstand capacity.it is repairable by skilled personall supporting structures made by mild steel angles , flats and round best available in market .it is treated with hot dip galvanizing epoxy coated after fabrication work done. Treatment gives long life and protection from rust and scale formation.

We are offering MX timber cross flow cooling tower.

DIRECT DRIVEN FAN: ENGINEERED POLYMER /HIGH GRADE POLYMER/ FRP FAN OPTION AVAILBLE LOW RPM AND WEIGHT SAVES ENGERGY COST AXIAL FLOW DESIGN THROW MAXIMUM AIR THROW ADJUSTABLE PITCH TO CONTROL AIR FLOW. 2 ) MOTOR ENERGY EFFIECIENT MOTORSPECIALLY DESIGNED FOR COOLING TOWER IP-55 WEATHER PROOFING AND 'F' CLASS INSULATION TO PROTECT FROM WEATHER , HEAT AND MOISTER TESC [TOTAL ENCLOSED SURFACE COOLED] LOWER RPM FOR REDUCES VIBRATION / NOISE LEVEL . FLANGE MOUNTED TOPSIDE LOCATED VERTICALLY HOLD ELEMINATS GEAR DRIVES 'V'BELT ARRANGEMENT. NO REGULAR MAINTANANCE REQUIRE 3) FILLS PACKING : HONEY COMB PVC / ABS / IPS / DOUBLE EDGE FOLDED FILLS AVAILABLE FILLS OPTION ARE AVAILABLE AS PER CLIENT REQUIRMENT CROSS PATTERN MAKES MAXIMUM AIR CONTACT AND LOWEST WATER LOSSES 4) SELF ROTATING SPRINKLER ALUMINIUM / ENGINEERED POLYMER / STAINLESS STEEL OPTION AVAILABLE LOWER RPM FOR SMOOTH ROATATION AND DISTRIBUTES WATER UNIFORMLY DOUBLE SEALED 'Z' BALL BEARING FOR LONG LASTING PERFORMANCE PVC / UPVC ARM PIPE HOLES ARRANGEMENT DROPS WATER EACH PITCH OF FILLS PACKING STAINLESS STEEL SHAFT WORKS FOR LONG LAST 5) FRP CASING GELCOATED OUTSIDE GIVES FABULOUS APPEAREANCE AND PROTECT FROM UV /UB RAYS MADE FROM HIGH GRADE FRP RAW GOODS FOR DURABILITY CASING MOUNTED WITH HDG M.S.STEEL PERFORM BEST IN WORSE WEATHER CONDITION 6) OTHER FRAME WORKS HOT DIP GALVANISED STRUCTURES AND SUPPORTS DESIGNED FOR DURABILITY IT PERFORM IN WATER AND WORSE WEATHER CONDITION FOR LONG TIME SPAN USER FRIENDLY DESIGN FOR EASENESS OF REPAIR/REPLACE ANY PARTS /SPARES BY ANY SKILLED PERSON 7) HARDWARE STANDARD SIZED HARDWARE FOR LONG LIFE. GALVANISED / STAINLESS STEEL / ZINKPLATED OPTION AVAILABLE Bottle shapedcooling tower designalso known as thecooling tower FRPinduced draft, we manufacture these products of better quality material than we do ascooling towers bottle designavailable at a very reasonable price. These are qualitative, long lasting and is available in various specifications. AVAILABLE 5 TR TO UUNLIMITED CAPACITY [ ONE CELL/ MULTI CELL]

1. DIRECT DRIVEN FAN TO ELEMINATE GEARDRIVE/ V-BELT ARRANGEMENT
2. ALUMINIUM ALLOYS / FIBRE GLASS / ENGINEERED POLYMER. OPTION AVAILABLE
   
3. LOW WEIGHT / HIGHER CFM / ENERGY SAVER FAN
4. AXIAL FLOW DESIGN FOR AIR THROW MORE .
5. ADJUSTABLE BLADES TO CONTROL AIR VOLUME .
6. GUNMETAL BUSH AVAILABLE FOR EASENESS TO REMOVE FAN

1. SPECIAL DESIGNED FLANGE MOUNTED / FOOT MOUNTED MOTOR USE IN CROSS-FLOW COOLING TOWER.
2. TESC[ TOTALY ENCLOSED SURFACE COOLED' /LONG SHAFTED AND IP-55 WEATHER PROOF MOTOR TO PERFORM IN WORSE WEATHER
3. "F' CLASS INSULATION TO PROTECT FORM EXCESS HEAT
4. LOWER RPM REDUCE VIBRATION / NOISE LEVEL AND MAINTAINANCE COST

1. PVC 'V' BAR TYPE FILLS PACKING WORKS IN HIGHER POLUTION / TDS / SCALLING FOR LONG LASTING
2. REGULARLY FILLS PACKING CLEANING OR REPLACING IS NOT REQUIRE .
3. STAINLESS STEEL / FRP / HDG GRID FOR PVC' V' BAR
4. EASY TO REMOVE / REPLACE / CLEAN FILLS PACKING
5. IN BULIT 'Z' TYPE LOUVER ELEMINATS WATER LOSSES.

4) FRP CASING / BASIN

1. DOUBLE STRUCTURE FRP AND HDG STEEL SUSTAIN IN WORSE WEATHER
2. GELCOATED SURFACE TO PROTECT IN UV/UB RAYS
3. PREMIUM GRADE FRP RAW GOODS AND STANDARD M.S.STEEL USE FOR BETTER DURABILITY .
4. BASIN SEALED WITH FRP PUTTY AND FRP COATING FOR LEAK PROOFING

5) OTHER SUPPORTING STRUCTURE :

1. STRUCTURE AND SUPPORTS ENGINEERED ROBUST DESIGN FOR DURABILITY
2. STANDARD DULY HOT DIP GALVANISING PROTECT M.S.STEEL FORM RUST
3. EASENESS TO MAINTAIN / REPAIR / REPLACE ANY SPARES .
   

1. NO REQUIREMENT OF WATER PRESSURE ONLY GRAVITY PRESSURE DISTRIBUTES WATER IN UPPER TROUGH.
2. USER CAN MERGE MORE THAN ONE APPLICATION IN COOLIONG TOWER
3. FLOWER TYPE NOZZLES SPLASH WATER UNIFORMLY ON FILLS
4. NOZZLE BIG ORIFICE REDUCES CLOGGING / JAMMING .FROM SCALE / DUST POLUTION

AVAILABLE IN 25TR TO 200TR IN SINGLE CELL, UNLIMITED IN MULTI-CELL
SOME MODEL HAVE UPSIDE AIR-DISCHARGE