Our Products
Hydraulic Machines
1 Products availableIndustrial Machinery
1 Products availableMedical Equipment & Supplies
1 Products availableLab Instrument
1 Products availableSeal Machines
1 Products availableWe are leaders in the market for providing best range of Heat Insertion Machines and Homogenisation Machines
plc controlled with hmi.
pid temperature controller to maintain the correct temperature of the heating elements
power supply: 230 vac, 50 hz, single phase @ 1.5 amp.
pneumatically operated machine.
air supply: dry & clean air @ 6 bar pressure.
air consumption: 3 to 5 cfm
consumables: heaters, heating elements,
sturdy ms frame with powder coating.
pneumatic / hydraulic cylinder for heating element movement
productivity: 2 to 4 pieces per minute.
copper tube nozzles with chilled air for cooling of the heat staked points.
plc controlled with hmi.
safety curtain for operator safety.
| Features:1. PLC HMI Controlled Machine.2. Safety Screen for operator safety.3. Digital Pressure controlled4. Safety Interlock ( Pressure , Temperature) |
| PLC and HMI Controlled MachineSafety Screen provided for operator SafetyPID Temperature controller to maintain the correct temperature of the heating elementsPneumatically operated machine with Festo make CylinderReplaceable Teflon sheets will be provided on top & bottom of the heater block to avoidsticking of the component to the heaterTeflon Coating Hot Plates.Sturdy MS frame with powder coating.The cycle starts by pressing the 2 hand push buttonsLogic controls will be through PLC ( Fuji Electric Make)MCB will be provided for input supplyAcrylic sheet framework will provide for machine.Temperature Interlock and All possible Interlock will be provided to Machine.Electrical Input Voltage: 230VAC+2V Single PhasePneumatic: Air Supply: 4 to 6 CFM @ 3bar pressure.Timer and relay logic control operationLeak proof joining All machined parts in general will be Blackened/Nickel platedFabricated parts will be powder coated as per your color schemeRelays will be provided for all output from PLC.All actuators & indicating lamp will be of TECHNIC / IDEC make |
| Heat insertion is the process which finds applications in joining plastic parts. Thermoplastic parts as such are too soft to sufficiently hold threads and offer tight joints. To overcome this problem threaded inserts of brass or steel are added post molding.Heat Insertion is a process wherein a heated thermal tip embeds a metal insert into a plastic application Used for assembly of metal parts with plastic parts permanentSuch parts used in automotive for fasting with metal parts in Vehicles |
| CRYSTAL ELECTRODYNAMIX PVT LTD Specialize for in Application Of1. Foot Board - Bolt inserts2. Intake manifolds - Nut Inserts3. Washer Tanks - Bushes4. Radiator Tank - Bushes |
| For heat insertion the brass or steel part to be inserted is preheated to temperature specific to the part and then pressed in the hole on the plastic part, which results in melting of plastic in the narrow zone, which flows in the knurls provided on the insert. The plastic is re-solidified by cooling, completing the assembly which results in much better mechanical properties. |
| Specifications for ultrasonic plastic welding machine General Features:This machine is suitable for co-extruded plastic tubes & for Lami tubes.Can seal a tube with 50 mm diameter.Uniform & leak proof welding joint.High Efficiency Ultrasonic Sonicator.Semi automatic operation.Inbuilt trimming attachment.Rigid frame constructionPneumatic speed regulator for sealing head & trimming head.Manual tuning with reading of "idling" & "welding power" on the instrument.Ultrasonic testAutomatic controllerTriple time for delay time, welding time & holding time.Welding pressure adjustable up to 6 barMicroprocessor based controller.Weld time, Hold time settable in the steps of 100 milliseconds.Digital counter up to 100, 000 countsresettable.Digital Bar graph to indicate tuning & energy during the welding cycle.Leveling screws provided on the ultrasonic assembly for easy settings & alignment of horn & anvil. |
| Specifications of 1.2 Kw/20 KHz. Ultrasonic Tube Sealing Machine: Electrical Input: Voltage: 230 +/- 5 V AC single Phase. Current: 8 Amps. Max. Power: 1.5 Kw. |
| Output:1. Frequency: 20 kHz.2. Power: 1 200 watts.Operating Frequency: 20 KHz.Generator Dimensions: 580*430*150Feather Touch screen for parameter settings on the front panel.Two line LCD display for parameter reading & setting.Generator weight: 17 kg.Co-axial Cable length: 3 meters.Sealing & trimming HeadMounted in Housing made up of 10 mm MS plates with Powder coating/platingRigid MS columns for supportTwo pneumatic cylinders which operate sequentially.Movable Sealing Horn & anvil |
| Machine Operation and Productivity:1. Auto cycle with Pneumatic System.2. Productivity : 12 to 15 Pcs per Minute. |
Ultrasonic Processor probe Sonicator is a tool specially design for Pharmaceutical chemical labs various research Institute colleges and Universities.
| ||||||
| Ultrasonic generator use to produce High Electrical Energy Operating at a frequency of 20 KHZ and Ultrasonic Power 150 wattsS.S. velocity Horn fitted with PZT Crystals (Transducer Element). this velocity Horn assembly convert the electrical energy fed from the Ultrasonic generator to Mechanical Vibrations at the rate of applied electrical frequency. The amplitude of this Mechanical vibration are magnified by this Frequency Horn Used for The Processing Application | ||||||
| Features:Low transducer losses permit maximum cleaning action.Modular generator for easier modification / ServicingRugged and easy to clean stainless steel Probe.Extensively protected electronics circuits for longer and safe operation.Frequency 20 KHzWattage: 1000 watt.Sample Capacity : 1000ml-7000mlOne Year Warranty
|
| Formulation | Tissue Homogenizers. | Stimulate Bacterial | Homogenizer Processor |
| Pharma | Dissolve Powders | Deaglomerate | Ultrasonic Homogenizer |
| R & D Lab | Probe Sonicator | Activity | Emulsify Cosmetics |
| Sonication Cell | Emulsify Liposomes | Ultra Sonicator | Extract DNA / RNA |
| De-gas Liquids | Sonication of Bacteria | Disperse Solids | Prepare Emulsions |
| Reactions | Sonication Cell Lysis | Extract Proteins | Accelerate Chemical |
| Reactions | Accelerate Enzymatic | Dissolve Tablets | Immiscible Liquids |
