Crimson Oil Tools Private Limited

Pali Road, Faridabad, Haryana

Our company is a prominent Manufacturer and Supplier of Crimson Flapper-Type Float Collar. The Flapper-Type Float Collar is designed for use in spring-loaded float equipments. Our assortment of Flapper-Type Float Collar is particularly well-suited for holes where the hole is not filled with fluid prior to running casing. The heavy-duty aluminum Flapper-Type Float Collar is mounted on an aluminum disk and is seated firmly against the 1/4" inch rubber seat by the valve spring.

Attributes :

• It is used where circulation is not needed to wash away bridges or condition the hole prior to cementing.
• The Flapper valve and valve seat are designed to provide a firm seal when the valve is closed.
• The back-pressure Flapper valve seals where circulation stops
• Crimson Flapper Type Float Collar is available for casing Sizes 3 1/2” to 20”.

Our company is a leading Manufacturer and Supplier of the Double Valve Float Collar. Our assortment of Double Valve Float Collar has all of the Features of the standard cement Float Collar and provides the added assurance of sealing when debris prevents the upper valve from closing. Internal parts of the Double Valve Float Collar are made of high quality material to achieve high strength.

Attributes :

• The Double Valve Float Collar is PDC drillable.
• It is also available in Non-Rotating Plate that is require with Non Rotating Cementing Plugs.
• Crimson Double Valve Float Collar are available for casing Sizes 3 ½” to 30”
• The design allows maximum circulation in horizontal and vertical direction.

Our company manufactures and supplies a wide range of Stab in Float Collar. The Stab in Float Collar is used in general technical casing, oil-string casing, and deep well and extra deep well. Our range of Stab in Float Collar is connected with casing. Crimson offers inner string cementing equipment with or without a latch-in feature on the stinger. The Stab in Float Collar provides all the benefits that come with inner-string cementing including the option to run one or more shoe joints and the option to displace the cement below the Float Collar without creating a wet shoe.

Attributes :

• Internal parts are made of high quality material to achieve high strength and PDC drillable.
• The Stab-in Float collar is also available in Double Valve.
• Crimson Stab-in Float collar are available for casing Sizes 9 5/8” to 30”
•  The lower end is pin threaded.

Crimson Hinged bolted Stop Collar is Designed to latch on the casing pipe without having to be slipped on at the end of the casing pipe allowing quick and easy installation. The friction grip type is hinged and incorporates a nut/bolt assembly which, when tightened, draws the stop collar into a friction grip around the circumference of the pipe. A valued point is that the stop collar should always have a stronger holding force than starting force. These Stop Collar undergo a special process of rust prevention before Painting . The Hinged Bolted Stop Collar are available in sizes 4 1/2" to 20" .

Crimson Spiral Nail Stop Collar uses two spiral locking pins which when driven in firmly lock the collar into position around the casing. This Stop Collar can be used in both upset and non-upset casing Provides maximum annular clearance. They can be latched on to the casing pipe without having to be slipped on at the end of the casing pipe, thus allowing Quick and easy installation. These Stop Collar undergo a special process of rust prevention before Painting . The Spiral Nail Stop Collar are available in sizes 4 1/2" to 20" .

Slip on set-screw type is a one-piece stop collar. Crimson also offers a premium one-piece stop-collar, with set screws for superior holding capability The outside ends of these collar are generally tapered to a degree which helps to hold the centralizer and avoid the ends to hit the Bows / Vanes when the centralizers are placed over them. These Stop Collar undergo a special process of rust prevention before Painting . The Slip on Set Screw Stop Collar are available in sizes 2 7/8" to 20" .

Cement Float Collar : The using method is the same as float shoes except the lower end is pin Thread. It is connected with casing. High strength concrete for maximum resistance to circulating erosion, as well as bump and back pressures . The usage of float collar is to make the casing landing easily by reducing the loading. When landing the casing, make sure to prevent from the drill fluid flow into the casing. After cementing, the float collar can prevent the cement slurry returning to the casing. . Internal parts are made of high quality material to achieve high strength and PDC drillable. The Float Collar are also available in Non-Rotating Plate that is require with Non Rotating Cementing Plugs. Crimson Cement Float Collar are available for casing Sizes 3 to 30

STAB-IN Float Collar : The using method is the same as Stab-in float shoe except the lower end is pin Thread. It is connected with casing. Crimson offers inner string cementing equipment with or without a latch-in feature on the stinger. This equipment provides all the benefits that come with inner-string cementing through a float collar, including the option to run one or more shoe joints and the option to displace cement below the float collar without creating a wet shoe. . Internal parts are made of high quality material to achieve high strength and PDC drillable. The Stab-in Float collar are also available in Double Valve . Crimson Stab-in Float collar are available for casing Sizes 9 5/8 to 30