Crimson Oil Tools Private Limited

Pali Road, Faridabad, Haryana

We manufacture and supply Straight Solid Rigid Centralizer applicable for horizontal and highly deviated well designs. The Straight Solid Rigid Centralizer center casing can assist in aligning casings through well heads near surface. Our range of Straight Solid Rigid Centralizer can be attached to the casing with set screws located between each vane, preventing casing rotation or reciprocation during cementing operations. If the casing is rotated or reciprocated during cementing operations, the Straight Solid Rigid centralizer can float on the casing joint between the stop rings. A flexible ceramic coating can be applied to the entire system to reduce friction.

Attributes :

• The Centralizers are wellhead friendly and have high impact with shock resistance, along with optimum tensile and yield strength.
• The Straight Rigid Centralizer is normally 8" long but it can be manufactured to any length the customer requires.
• The Centralizers are available with or without set screws for eliminating of stop collars.
• Straight Solid Rigid Centralizer are available for casing Sizes 4 ½” to 20”

Our Spiral Solid Rigid Centralizer are designed to meet the needs for better cementing in high deviated and horizontal well. The smooth spiral 360 overlap solid vane design of Spiral Solid Rigid Centralizer provides wall Bore contact that will not damage wellhead equipment. The 30^o slope of the vane ends reduce drag and aid the casing in reaching TD. We manufacture and supplies Spiral Solid Rigid Centralizer rigid are cast of a high grade aluminum alloy with one-piece construction. They give optimum flow area in highly deviated and horizontal wells .Spiral Rigid Centralizers increases induced swirl that increases the displacement efficiency.

Attributes :

• The solid cast aluminum Centralizers binds with high tensile and yield strengths as well as corrosion resistance.
• Casting not only makes a well designed touch tool but reduces manufacturing costs.
• The Spiral solid Rigid Centralizer is aluminum / Zinc centralizer with similar design features of the steel solid Rigid Centralizer.
• The spiral blade Solid rigid Centralizers are available in R/H and L/H side.
• Spiral Solid Rigid Centralizer are available for casing sizes 4 ½” to 20”.
• It has high impact and shock resistance command fluid swirl.

We deal in Cementing Rubber Plugs are offering cementing rubber plug designed with plastic core and aluminum core. This helps to compliment its line of plugs to decrease drill out times. The Cementing Rubber Plug is used for separating the cement slurry from the mud. Our range of Cementing Rubber Plugs have solid top plug and the bottom plug is hollow. They can all be drilled out with PDC bits. The material of the Cementing Rubber Plug body is Acrylonitrile- Butadiene rubber. It is heat-resisting and tough and the core is made of a glass-filled high strength Phenol resin core.

Attributes :

• The tapered base fits the cavity of the bottom plug for a positive seal.
• The fins and tail section provide positive wiping action. Fins also serve as a seal while cementing
• A rubber diaphragm at the top of the plug ruptures after the plug is seated allowing cement to flow through.
• The cementing rubber plugs are available in sizes 4 12" to 20".
• It prevents the mud from blending into the cement slurry to influence the cementing quality.

We specialize in manufacture and supply of Crossover Subs has two main applications. They can be used to cross over from one connection size to another, or as a disposable part used to prolong the life of more expensive drill stem components. We deal in Crossover Subs utilizing 4140 Q&T Alloy Bar; the heat treatment allows us to maintain a 28-32 Rockwell Hardness. The threaded connections are also protected by a durable phosphate surface coating that helps reduce galling during the initial make-up. All of the Crossover Subs are manufactured to conform to API specifications. The offered Crossover Snub products are provided with BOX x PIN, BOX x BOX or PIN x PIN connections.

API Reg PIN x API Reg BOX :

• 2 3/8” PIN X 2 3/8” BOX (Overall Length 230mm)
• 2 3/8” PIN X 2 3/8” BOX (Overall Length 430mm)
• 2 3/8” PIN X 3 1/2” BOX (Overall Length 260mm)
• 2 7/8” PIN X 2 3/8” BOX (Overall Length 230mm)
• 3 1/2” PIN X 2 3/8” BOX (Overall Length 260mm)
• 3 1/2” PIN X 2 7/8” BOX (Overall Length 305mm)
• 3 1/2” PIN X 3 1/2” BOX (Overall Length 280mm)
• 3 1/2” PIN X 3 1/2” BOX (Overall Length 540mm)
• 3 1/2” PIN X 4 1/2” BOX (Overall Length 300mm)
• 4 1/2” PIN X 3 1/2” BOX (Overall Length 300mm)
• 4 1/2” PIN X 4 1/2” BOX (Overall Length 300mm)
• 6 5/8” PIN X 4 1/2” BOX (Overall Length 300mm)
• 2 7/8” PIN X Short thread 2 3/8” BOX (Overall Length 230mm)

API Reg PIN x API Reg PIN :

• 2 3/8” PIN X 2 3/8” PIN (Overall Length 280mm)
• 2 3/8” PIN X 2 3/8” PIN (Overall Length 430mm)
• 2 3/8” PIN X 3 1/2” PIN (Overall Length 280mm)
• 2 3/8” PIN X 3 1/2” PIN (Overall Length 430mm)
• 3 1/2” PIN X 3 1/2” PIN (Overall Length 280mm)
• 3 1/2” PIN X 3 1/2” PIN (Overall Length 430mm)
• 3 1/2” PIN X 2 3/8” PIN (Overall Length 300mm)
• 4 1/2” PIN X 4 1/2” PIN (Overall Length 280mm)

API Reg BOX x API Reg BOX :

• 2 3/8” BOX x 2 3/8” BOX (Overall Length 280mm)
• 2 3/8” BOX x 2 7/8” BOX (Overall Length 240mm)
• 2 7/8” BOX x 3 1/2” BOX (Overall Length 240mm)
• 3 1/2" BOX x 2 3/8” BOX (Overall Length 260mm)
• 3 1/2” BOX x 3 1/2" BOX (Overall Length 280mm)
• 3 1/2" BOX x 4 1/2” BOX (Overall Length 300mm)
• 4 1/2” BOX x 4 1/2” BOX (Overall Length 230mm)
• 6 5/8” BOX x 3 1/2” BOX (Overall Length 300mm)
• 6 5/8” BOX x 4 1/2” BOX (Overall Length 300mm)
• 6 5/8” BOX x 6 5/8” BOX (Overall Length 300mm)

We manufacture and supply a full line of high Quality Hammer Unions.  The Hammer Unions are designed as heavy duty, high pressure flow line connectors.  Our collection of Hammer Unions come in different sizes, shapes and pressure ratings, and when used correctly they are a safe and reliable means of transporting fluid. The Hammer Unions are high-pressure threaded or welded connections with two halves a threaded female half and a wing male half with swivel nut that fit together and seal upon turning and then hammering the nut half together with the threaded half. Hammer unions for sour gas service are specially heat-treated for controlled hardness and utilize fluorocarbon elastomeric seal rings.

Attributes :

• Crimson Hammer Unions are available in sizes 1" to 12".
• Hammer unions are in a wide range of sizes and in working pressures of 15, 000 psi.
• The Hammer Union is commonly found in chemical plants, on marine dredging vessels, in strip mines and in the oil industry
• All Hammer unions provide pressure-tight, positive sealing and are available for standard service and sour gas models

Our company is a renowned Cement Basket Manufacturer and Supplier. The Cement Basket is an effective aid in retaining and supporting the cement where weak formations and stage cementing is encountered. Our array of Cement Baskets is designed with flexible bow springs, heat-treated under controlled conditions for maximum strength and uniformity. The Cement Basket is welded to slip-on collars and overlapping metal fins for flexibility and strength to support long columns of cement during primary cementing operations.

Attributes :

• The Cement Baskets are not infected by the temperature and causticity liquid and can be used with relevant small casing.
• This type of Cement Basket can be rotated and reciprocated.
• It is available in hinged type welded cement Basket.
• The Cement Basket is available in sizes 4½" to 20".

We manufacture and supply uniquely profiled Rigid Bows that simultaneously provide the operator with those features found desirable in both spring bows. The result is a Rigid Bows Centralizer that far exceeds the performance standards set forth in API Specification 10D. The spring characteristics of its double crested profile permit compression to facilitate movement through tight spots and dog legs. High quality Rigid Bow Centralizer made of special alloy steel with uniform hardness provides optimum performance. The Rigid Bow Centralizer is available in a range to accommodate any well profile.

Attributes :

• The bows with extended profile prevent them from hitting against casing collars. The bows are available in a range to accommodate any well profile.
• Semi Rigid Bow Centralizers undergo a special process of rust prevention before powder coating.
• Rigid Bow Centralizers are available in sizes 4½" to 20".
• Recommended for use with all standard casing grades.

Our collection of Single Piece Centralizer is manufactured from a single piece of heat-treated steel giving a hardened and tempered surface that result in greatly reduced torque and drag losses. The Single Piece Centralizer offer high fatigue strength for axial forces and radial side loads on bows during tubular rotation. Our specially designed Single Piece Centralizer, eliminate the risk of loose part or welding failure as it is all made from one single piece using state of the art manufacturing process and material. The Single Piece Centralizer can be installed with two stop rings, one internal stop ring or casing couplings. The blades, top and bottoms rings are made of one piece to ensure the Centralizer’s integrity during rig operations.

Attributes :

• It is generally shipped in assembled condition only.
• The Centralizers undergoes a special process of rust prevention before powder coating.
• The Single piece centralizers are available in sizes 4½" to 20”. (Any special sizes or combination can available on request).
• Runs in close tolerance applications mainly on liners.

Crimson Non Weld Turbolizer with metal fins installed on the bows to help induce turbulence in the cement slurry during pumping operations. Like the spring bows, the fins are made of heat-treated alloy steel. This makes them flexible, which minimizes damage while moving down hole. Meet API Specification 10-D requirements for Starting, Running and Restoring Force in most casing and hole combinations. The fins direction can be made in both right and left hand versions to assist in the uniform displacement of the cement. Collars are of widened design for greater frame strength and to prevent bows hitting casing. Integral hinges are designed to wrap to the inside and are with eight sections and seven shear points for minimum disorientation even under severe stress. Turbolizers are available in the same sizes and bow heights as centralizers. Turbolizer undergo a special process of rust prevention before powder coating.Hinged Non Welded turbolizer are available in sizes 4" to 20".

Crimson Non weld Positive Centralizer are Provided with rigid bows of U Profile design instead of spring bows to ensure maximum fluid passage and reduces frictional drag force in deviated hole conditions . They provide almost 100% standoff when run inside a cased hole . The flat U profile is fitted in self locking retaining lips for firm and positive hold. Bows can be selected to meet any hole Size from a choice of ten standard U profile depths and bow heights. Positive Centralizers undergo a special process of rust prevention before powder coating.Hinged Non Weld Positive Centralizer are available in sizes 4" to 20".

This Crimson product features uniquely profiled bows that simultaneously provide the operator with those features found desirable in both spring bow and rigid centralizers. The result is a centralizer that far exceeds the performance standards set forth in API Specification 10D. The spring characteristics of its double crested profile permit compression to facilitate movement through tight spots and dog legs. . High quality Bows made of special alloy steel with uniform hardness provide optimum performance. The bows with extended profile prevent them from hitting against casing collars. The bows are available in a range to accommodate any well profile. Semi Rigid Bow Centralizers undergo a special process of rust prevention before powder coating.Hinged Non Weld Semi Rigid Bow centralizers are available in sizes 4" to 20".

Crimson Slip On Welded Spirolizer are specially designed for centralization of casing pipe in highly deviated and horizontal wells. The steel construction ensures extra strength and superior toughness. The design of the blades provide minimum friction reducing drag forces while running in the pipe. The Spirolizer have Spiral Vanes strongly welded onto the outside of the slip-on end collars under required temperature and condition with correct grade electrode. Vanes can be selected to meet any hole-diameter from a choice of seven boat profile depths. The Spirolizers are available in R/H , L/H Side Spiral Vanes and Straight Vanes which resist high side loads. Slip On Welded Spirolizer is shipped in assembled condition only. The Spirolizer undergo a special process of rust prevention before powder coating. The Slip On Welded Spirolizer are available in sizes 3" to 13 3/8".

CRIMSON CASING ROLLER CENTRALIZER Consists of rigid body, on which machined Straight Blades and spiral blades. There are modified alloy steel, fully heat treated rollers fixed on every Straight or spiral blades. Because of rigid body and rolling friction between the rollers and inside of well or casing, the capability of the roller Centralizer is better than others of all. Roller centralizers are mainly used for big high Roller, high deviated wells and horizontal wells, to centre casings. Roller centralizers can also remove wellbore cake and improve mud replacement efficiency etc. . Rollers provide superior wear resistance and have been proven to remain functional throughout the life of the well and can aid in casing/tubing retrieval. Precision-machined inside diameter fits over the casing through the complete API tolerance range, providing excellent rotational performance in mud. When running casing through open hole, the systems smaller roller-contact area reduces the risk of differential sticking and maintains standoff .The roller/axle relationship ensures that axle shear stresses remain within elastic limits, preventing permanent deformation. Axles are crimped in place, eliminating the welding process, while ensuring the rollers cannot break free and fall into the wellbore. The systems high-quality construction materials improve high-pressure/high-temperature capabilities. CRIMSON Casing Roller Centralizer are available in sizes 3" to 20".

Crimson Spiral Blade Solid Rigid Centralizer are designed to meet the needs for better cementing in high deviated and horizontal well. The smooth spiral 360 overlap solid vane design of centralizers provide wall Bore contact will not damage wellhead equipment , has high impact and shock resistance comand fluid swirl. The 30 slope of the vane ends reduce drag and aid the casing in reaching TD. Solid rigid centralizers are cast of a high grade aluminum alloy with one-piece construction. They give optimum flow area in highly deviated and horizontal wells .Spiral Rigid Centralizers increases induced swirl which increases the displacement efficiency. The solid cast aluminium centralizers bine with high tensile and yield strengths as well as corrosion resistance . Casting not only makes a well Designed touch tool , but reduces manufacturing costs . The Spiral solid Rigid Centralizer is an aluminium / Zinc centralizer with similar design features of the steel solid Rigid Centralizer. The spiral blade Solid rigid centralizer are available in R/H and L/H side . Crimson Aluminium Spiral blade Solid Rigid Centralizer are available for casing Sizes 4 to 20

mary objective. Applicable for horizontal and highly deviated well designs, the rigid centralizers center casing in previous run casings and can assist in aligning casings through well heads near surface. The straight blade centralizer can be attached to the casing with set screws located between each vane, preventing casing rotation or reciprocation during cementing operations. If the casing will be rotated or reciprocated during cementing operations, the Straight blade centralizer can float on the casing joint between the stop rings. A flexible ceramic coating can be applied to the entire turbulator to reduce friction. Crimson straight blade centralizers are wellhead friendly and have high impact with shock resistance, along with optimum tensile and yield strength. The Straight blade rigid centralizer is normally 8" long, but it can be manufactured to any length the customer requires. The straight blade solid Rigid Centralizer is an aluminium / Zinc centralizer with similar design features of the steel solid Rigid Centralizer These centralizers are available with or without set screws for eliminating of stop collars. Crimson Aluminium Straight blade Solid Rigid Centralizer are available for casing Sizes 4 to 20

CRIMSON has designed its plastic core and aluminium core cementing plug to Compliment its line of plugs to decrease drill out times. The cementing plug is used for separating the cement slurry from the mud .It can prevent the mud from blending into the cement slurry to influence the cementing quality. Structure features: The top plug is solid .The bottom plug is hollow. They can all be drilled out with PDC bits. The material of the plug body is acrylonitrile- butadiene rubber. It is heat-resisting and tough. The core is made of a glass-filled high strength phenolic resin core. The tapered base fits the cavity of the bottom plug for a positive seal. the fins and tail section provide positive wiping action. Fins also serve as a seal while cementing. A rubber diaphragm at the top of the plug ruptures after the plug is seated allowing cement to flow through. The Cementing rubber plugs are available in sizes 4 1/2" to 20".

bottom plug move into the end, raised plum flower petal of the bottom plugs lower end engaging with the hollow plum flower petal of float collars upper end. At the same time, the pressure rise, when reach the definite pressure, the burst disk in the bottom plug crush, the passageway open, and the pump pressure descent, at this time can cementing. After cementing, pumping into the top plug to clean cement slurry on the inner wall, the raised plum flower petal of the top plug engaging with the hollow plum flower petal of the bottom plug. The Non Rotating Cementing plugs are available in sizes 4 1/2" to 20".

Crossover Subs Crimson crossover subs have two main applications.? They can be used to cross over from one connection size to another, or as a disposable part used to prolong the life of more expensive drill stem components. we manufacture our Subs utilizing 4140 Q&T Alloy Bar; our Heat Treatment allows us to maintain a 28-32 Rc Hardness. The threaded connections are also protected by a durable phosphate surface coating that helps reduce galling during the initial make-up. All of our crossover subs are manufactured to conform to API specifications. These offered products are used to crossover from one connection size to another. The offered products are provided with BOX x PIN, BOX x BOX or PIN x PIN connections.

Crimson Manufactures a full line of high Quality Hammer Unions. Hammer Unions are designed as heavy duty, high pressure flow line connectors. They come in many sizes, shapes and pressure ratings, and when used correctly they are a safe and reliable means of transporting fluid .They are commonly found in chemical plants, on marine dredging vessels, in strip mines and in the oil industry. Hammer unions are available in a wide range of sizes and in working pressures to 15, 000 psi. Hammer Unions are high-pressure threaded or welded connections with two halves a threaded female half and a wing male half with swivel nut that fit together and seal upon turning and then hammering the nut half together with the threaded half. all Crimson hammer unions provide pressure-tight, positive sealing and are available for standard service and sour gas models. Hammer unions for sour gas service are specially heat-treated for controlled hardness and utilize fluorocarbon elastomer seal rings. Crimson Hammer Unions are available in sizes 1" to 12" .