Other Products / Services #3584209

Minilec offers timers for various functions and applications, in various enclosures/sizes and with multi voltage options.

• Single voltage and Multi-voltage
• Single function and multi-function
• Wide time range
• Better repeat Accuracy
• Models with Micro-Controller based design
• Use of SMD Technology (S2 Series models)

• On Delay
• Interval Delay
• Cyclic ON/OFF
• Multi-Attempt (for Engine Starting)
• Star-Delta changeover
• True off Delay

Minilec Microprocessor Based Alarm Annunciators are designed to keep an alert and watchful eye on your plant and processes. The entire range has been designed with an insight into the modern day manufacturing plant and its future requirements. Minilec Alarm Annunciators are equipped with microprocessor-based design, super bright LED facia windows, site selectable, programmed sequences as per ISA standard and thoughtful provisions for troubleshooting and maintenance. Dynamic, Alert and Responsive These unique advantages have helped the Minilec Annunciators to be an icon in the power T and D industry and engineering establishments in India. The world class Minilec Annunciator has made its presence felt in Overseas markets.

• 4 windows to 128 windows
• Integral & Split models
• Microprocessor based
• Super bright LEDs for facia
• Standard operating sequences
• Any other custom- made sequences
• NO-NC & Trip Non-Trip site selectable
• Repeat relays
• Supply fail annunciation / Indication
• Choice of 3 window sizes
• Choice of five colours
• RS 232 / RS 485 Output Port

Frequent fluctuations or variations of power not only causes financial but manpower loss too! SENTRI SERVO CONTROLLED VOLTAGE STABILIZERS beast these happenings and provides all extra care needed to your valuable equipments.

• Rating : As Specified
• Input Voltage Range : As Specified (Eg. 170V-270 V)
• Input Supply Frequency : 45Hz-55Hz
• Output Voltage: As specified (Eg. 230V/240V + 1%)
• Voltage Regulation : + 1%
• Rate of Correction: Usually 25V/ SEC/Phase but depends on rating
• Efficiency: Better than 97 %
• Waveform Distortion : Nil
• Effect of Load Power Factor : Nil
• Amibient Tempreture : 0-50C Max.
• Type : 1 Phase

• Output voltage sensing for voltage correction & for U/V & O/V trip
• Overvoltage & undervoltage trip by means of contractor / relay's
• Voltmeter with selector switch to see input & output voltages
• Short circuit & overload protection by means of MCB/ FUSE MCCB
• Adjustment : Output voltages adjustment of + 5V/ Phase will be
• Adjustment : Output voltages adjustment of + 5V/ Phase will be provided by means of potentio meter on front plate.
• Controls: Auto/Manual incase of auto mode failure you can set output voltage through manual mode.

In an Elent CVT, the AC mains powers the input winding which is widely separated physically from the isolated output winding. The input winding normally runs at very moderate Flux linkage levels. The output winding exhibits an intrinsic energy characteristic and this energy storage operates in conjunction with mains capacitor to produce self-generated AC flux field which is indirectly excited from the input winding. The result is instantaneous voltage regulation. No transient and spikes. Sinewave output. A perfect answer and remedy for every electronic equipment.

• No semiconductors or moving parts used, hence very high reliability
• No feedback control used
• Intrinsic current limiting and short circuit protection
• Output voltage correction within Cycle ( 10 ms) from no load to full load for specified load and line variation
• Short term over load capability
• Energy storage for line loss up to 3 ms at typical loads
• Higher input voltage control range, for loads less than rated load
• Very high line transient/spike rejection capability and excellent input to output isolation characteristics
• Output floating (optional)

RangeElent CVT is available in a wide range. from 50 VA to 10, 000 VA with load test conducted at unity power factor for all ratings. For configurations other than those mentioned above, please contact our office.

• 10 Amps
• Single pole, 2, 3 & 4 Poles
• Terminal - Screw / Solder / Push-On

• 10 - 15 - 35 Amps
• 1, 2, 3 & 4 Poles = 2 / 3 Positions
• Stay put / Spring Return Combination
• Terminal - Screw / Solder / Push-On

• Lost Motion (Bell Alarm) Contacts
• Sequence Locking Device
• Lockable Handles
• Pistol Grip & Lever Handles

• Push-Pull Interlock System
• Discrepancy Switch
• Tee & Lever Lock Handles
• Toggle Knob & Ball Handle
• 30, 45, 60 & 90 Throw

• For Directly Switching On Reversing
• Star-Delta
• 2-Speed
• 2-Speed Reversing

• Inching of MOTORS of 1, 3, 5, 7.5, 10, 12.5 & 15 H.P . & Switching On of Motor of 18, 22, 30, 37 & 45 KW

• Transmitter & receiver Included.
• To identify & trace up to 16 cables.It can also be connected to heat and water supplying installation system.
• Digital display on the receiver indicates the relative cable.

CUP ANEMOMETER/BAROMETER/HUMIDITY/TEMP.

• Air velocity : 0.9 to 35.0 m/s, ft/min., km/h, mile/h, knots.
• Barometer : 10 to 1100 hPa, mmHg, inHg.
• Humidity : 10% to 95% RH, Dew.
• Temperature : 0 to 50 oC, oC/ oF.
• All in one, hand held type.
• Cup type probe, no wind direction.
• Hold, Record (max., min.).
• DC 1.5V battery (UM-4, AAA) x 4.

• The test clips used for measuring the SMD components(resistor, capacitor, inductor, diode.)
• Cable length : appro x 90 cm.

• Photo Tach. : 5 to 100, 000 RPM
• Contact Tach. : 0.5 to 19, 999 RPM. Surface speed : m/min, ft/min.
• Size : 215 x 65 x 38 mm.
• Patented.

• 3 ranges, 2500 MHz, 100 MHz, 10 MHz.
• Frequency, Period, Hold, Relative, Max., Min., Average, 8 digits LCD.
• High sensitivity for VHF & UHF frequency.
• Size : 173 x 80 x 35 mm, Portable type.

• 1, 000 oC no contact infrared Temp. measurement.
• 1400 oC type K thermometer.
• Dual laser for better targeting.
• Large LCD display with back light.
• D/S ratio value : 50/1.
• Min., Max., Differential, Average, Lock mode.
• Last measurement memory.
• Hi/Lo Temperature Audio Alarm.
• Adjustable emissivity value from 0.1 to 1.00.
• Power supply : DC 1.5V battery (UM 4/AAA) x 2 PCs .
• Dimension : 203 x 197 x 47 mm

• Dual & differential input, 200 mbar x 0.1 mbar.
• Unit : mbar, PSI, Kg/cm2, inch/Hg, mm/Hg, inch/H2O, meter/H2O, Atmosphere.
• Data hold, Memory (Max., Min.).
• RS232/USB computer interface.
• Application : Industrial, laboratory, schools, heating, ventilation, hospital, medical.
• Size : 180 x 72 x 32 mm.

PRESSURE TRANSDUCER, 0 to DC 100mV

• 6 models : 2/5/10/20/50/100/400 bar.
• Zero pressure - 0 DCV, Full scale - 100 mV.
• Power supply : DC 9V to 30V.
• 4 wires : 2 wires for power, two wires for signal.

2 WIRES PRESSURE TRANSMITTER

• Range : 2, 5, 10, 20, 50, 100, 400 BAR.
• Output : 4 to 20 mA DC. 4 mA = 0 pressure 20 mA = full scale pressure
• 2 wires, both for signal and power supply.
• Precision ceramic type pressure sensor.
• External zero and span adjustment.
• Output with socket, easy replacement.
• Allow high cable load resistance, transmittercan install far away from the controller/incator.
• Protection for the reverse wires connecting.
• TR-PS2W can cooperate the " 4-20 mAController/Alarm/Indicator " CT-2012, then become a pressure controller and theindicating system. The user can control andmonitor the pressure value from far away.