Credisaint Anti-Slip Solutions

Daliganj, Lucknow, Uttar Pradesh

The foil backing allows the anti-slip surfacing to be hammered into shape for a perfect fit.

Can be used on factory walkways, ladders, construction equipment, trucks, ships and railways.

After determining that the surface is clean, smooth and dry, remove the release paper from the underside of the tape , to expose the pressure-sensitive adhesive .Be certain that is in the proper alignment , use foot pressure, vinyl wallpaper smoother roller or soft rubber mallet to bond the safety tread in place.

Ready To Use :The Anti-Slip Tape can be walked on immediately. Maximum bond of the adhesive occurs about 24 hours after installation. The Slip Guard conformable safety-grip abrasive safety tape is an ingenious non slip surface ideal for use on chequer or durbar plate, it comes in three industry specified colours; black, yellow orblack/yellow hazard, although we can make to any Pantone or RAL colour on special request.

The conformable material for this abrasive safety tape is constructed from a soft aluminum foil base and then top coated with a thick spread of aluminum oxide grit.
Once the abrasive safety tape has been applied the conformable safety-grip adopts the texture of the durbar or chequer plate, as it is foil based it has no inherent memory so will not lift or rise off.As the conformable safety-grip material is non-plastic based it has a secondary use of being flame retardant, our product has been tested to certain Civil Aviation Authority specifications for burn testing

The marking of Aisles and passageways on industrial floor is an important location that places importance on organization and the welfare of its workers. OSHA guidelines for aisle marking vary depending on the purpose for which the aisle is intended . Considering at this aisle marking will need to remain in place for the life time of facility, let, s take a look at how the method used for creating and maintaining that marking for longer life and what is more suitable for marking:Aisles and passage ways area commonly marked with paint, so let, s look at what is using paint to mark the floor over the long term life of the facility. Paint does not allow well to concrete, so the floor must usually be prepped by bead blasting or etching to rough up the surface so that the paint will have something to grab, When the area is open again to traffic, the line is subjected to the abuse to their indoor vehicles. Paint does not tend to hold up very well to this constant traffic. The line is constantly need to be repainted to maintain highly visible markway. Basically the entire process has to be repeated. This is alternative method of creating a line that would eliminate the bead blasting floor prep, that shut down time, all while creating a line that last longer and require less frequent maintenance so here presenting:To create nice clean line to delineate the walkway, two stripes of tape are applied to create a template for the paint. The highest grade of flooe tape i.e Endurastripe features beveled or chamfered edges and a recessed adhesive system. The beveled edges create a "ramp" effect, allowing trafic to be directed up and over the line. Because the adhesive is recessed away from the edge, the traffic never touches the adhesive, and the remains intact for longer period of time.

Line marking systems have rapidly advanced in the past 5 years due to pioneering efforts that company has performed. Line marking paint was previously the only viable option for creating line marking in a warehouse or production facility, for decades we accepted that line marking paint was the way to create the lines and accepted all its disadvantages. EnduraStripe beats paint in every area; these are just some of the advantages;
EnduraStripe line marking systems can be walked on immediately after application, paint needs time to dry.
EnduraStripe is over 1.1mm thick, even if multiple coats of applied of paint it is not close.
The durability of EnduraStripe is far superior to paint line marking systems.
EnduraStripe can be applied instantly, when applying paint the area needs to be masked off with masking tape down the sides to create straight lines.
No fumes are emitted, EnduraStripe does not use solvents, and it can be used in food preparation or sterile areas. Line marking paint emits a smell which can create problems for certain areas. line painting
As EnduraStripe is a solid, homogenous piece of virgin plastic it will not snap so can be removed if required enabling it to be removed and then replaced with a different colour as required. Paint is very difficult to change if a different colour is required or the paint is damaged.
Company produces the product in many different shapes and formats; EnduraStripe lean has the widest possible variation of corners, angles, arrows etc allowing to easily creating an internal 5S factory marking system. Paint does not lend itself to flexibility; it requires more effort to make angles etc.
Letters and digits are produced with ease; pain is messy and requires stencils that posses rough edges.
EnduraStripe comes complete with an industry leading 2-year guarantee, as paint is not durable they never offer this!
In cold rooms such as commercial fridges and freezers we can resolve application problems using special primers and adhesive promoters developed by company. Please enquire concerning this.
No specialist equipment or training required. EnduraStripe and EnduraStripe lean can be applied without the need of equipment or training saving your company a huge amount of money. Why pay for a company to install line marking at a time convenient for them when you can fit yourself using your own internal staff?
Applications:
Warehouses, metro, parking areas, sports club , airports, bus stations, cafes, car parks, changing rooms, enamel baths, factories, hospitals, kitchens, leisure centres, nursing homes, offices, restaurants, shop entrances, shopping centres, swimming pool surrounds, toilets, train Stations.

Power outs in the workplace increase health and safety hazards , doing your upmost to eradicate the problems that may arise can save you and your employees a lot of hardship . Slip Guard produces glow in the dark photo luminescent egress tape for that very purpose, manufactured using the latest technology in photo luminescence to ensure walkways, stairways and entrances and exits are illuminated well enough for you to find your way safely.

Slip Guard aqua-safe range has a unique non slip coating to ensure an effactive non slip flooring yet has a smoother surface for walking bare foot on and no abrasion to prevent damage to skin , material or wet suits . Non slip coating in a wet or marine environment has always been a challenge yet with Slip Guard aqua safe you can easily obtain a good non slip flooring capability with our safety tape. this non slip coating is ideal for use in food safety areas, due to its lack of abrasive peaks and valleys and is a unique product. The product is ideal for any wet area or used as a marine . We can supply in any format including shapes and rolls.

Unique non slip coating,
Possesses a high coefficient of friction
No harsh grit granules
permanent adhesive coating,
Available in five popular colours
black, white, beige, grey and clear,
Any width/shape available.
Easy, instant applicatioin.
A great slip slip marine tape.
Creates an excellent non slip flooring.

Showers Bath Tubs
Swimming Pools
Stair trends
Locker rooms
Threapy rooms and equipments.
Entry way
Steps tools
Golf carts
Aquatic equipments and
Dozens more

Our new resilient range is an ideal non abrasive anti slip material, it possesses that qualities of aqua-safe yet offers a resilient non slip coating which which has a slight 'give' to it and has a feel slightly similar to rubber but with the advantages of plastic, please enquire. Off the shelf we offer in black or yellow but dependent on quantity and on request we can make any of safety tape to any Pantone or RAL refrence. This material is often used to create a non slip marine tape .