Features :

• Can withstand wide voltage fluctuation – from 300-440 volts.
• Suction lift up to 7.5 meters.
• Top flat efficiency curve : minimum efficiency variation in the entire operating range
• Efficiency at par with internationally available pumps – higher upto 10 points than minimum required by Indian standards specification
• Models are with IP – 44 protection. Models with IP – 55 protection are also available on request
• Class of insulation 'B' ( 'F' Class for 9.3 kw and 11.0 Kw ratings).
• Designed to prevent overloading and motor burning
• Dynamically balanced rotating parts ensure minimum vibrations
• Replaceable wearing parts results in longer life
• Designed for automatic air release during priming
• Continuous rated motor
• Inside and outside of pump covered by anticorrosive paint

Applications :

• Irrigation.
• Industries for clear water handling
• Water supply for domestic use in apartments, Buildings and hotels.
• MMP Series Three Phase Pumps : Single stage, High speed horizontal, Centrifugal , Monoblock with volute type delivery casing

applications

milk, cream, butter milk, condensed milk

fruit juice, beer, wine, sugar syrup

vitamin solutions, sugar & confectionery.

ro water, dm water, pure water. water for injection (wfi)

vegetable oil, mineral oil, lub oil etc.

pharmaceutical formulations, syrup etc.

alkaline solution / alcoholic drinks.

acids, fine chemicals

bottling plants, soft drinks & distillery

food processing / liquid food stuffs

colour dyes and pigments / paints

descaling applications, paper & cement industries

water treatment plants

detergent, soaps, paste & shampoo

textile sizing, dyeing & finishing systems

natural cellulose fiber / synthetic fiber system

hot & cold water pumping.

features

as all pumps are made from rolled stainless steel, mechanical

properties are far superior than cast material.

pore free, non-pitting and non-adhering smoother surface,

so lesser friction losses, and lesser service corrosion.

super finished surface also ensures no ingress or emission of

germs or impurities during pumping or idling which is a basic

requirement of sterile / hygienic application.

pump can handle liquids having viscosities

up to 1500 centipoises.

pumps are highly energy efficient and requires lesser npsh to

function without cavitation.

the pumps can work under a vacuum of 720 mm of hg,

suitable for vacuum evaporators.

pumps are available with cosed/semi open impellers.

the best elastomers are used in the pumps to provide optimum

resistance for high temperatures and chemicals.

minimum working / rotating parts.

safe and quiet operation levels.

gentle product handling with lower maintenance and

downtime cost.

dynamic combinations of seal faces as per customer's

requirement (single seal / double seal, seal external cooling ).

suitable for standard motor or flange type or foot cum flange

type motor or engine

monoblock or bare pumps or with trolley.

also with flame proof motors.

various types of connection like - tri'clove joints sms, flanges

or threaded nipple/coupling.

pumps with adjustable legs, available on request.

special bearing for hot water application available on request.

located in ahmedabad(india), we are actively involved in bringing forth a high quality array of products in the market. We ensure the products we provide buyers with are as per international quality management systems.

features :

• can withstand wide voltage fluctuation – from 300-440 volts.
• suction lift up to 7.5 meters.
• top flat efficiency curve : minimum variation in efficiency in entire operating range
• efficiency at par with internationally available pumps – higher up to 10 points than minimum required by indian standards specification
• models are with ip – 44 protection. Models with ip – 55 protection are also available on request
• class of insulation ‘b’ ( ‘f’ class for 9.3 kw and 11.0 kw ratings).
• designed to prevent overloading and motor burning
• dynamically balanced rotating parts ensure minimum vibrations
• replaceable wearing parts and hence longer life
• designed for automatic air release during priming
• continuous rated motor
• inside and outside of pump covered  by  anticorrosive paint

applications :

• industries for clear water handling
• water supply for domestic use in apartments, buildings and hotels.
• mmp series three phase pumps : single stage, high speed horizontal, centrifugal , monobloc with volute type delivery casing

range :

• head : 6-52 meters
• capacity : 19.0-2.0 liters per second
• power rating : 0.37 kw to 5.5 kw (0.5 hp to 7.5 hp )

     
material of construction standard supply :

• impeller : cast iron
• delivery casing : cast iron
• motor body : cast iron
• shaft : en -8
• shaft sleeve : ss-410

optional supply :

• impeller : bronze / stainless steel
• shaft : stainless steel
• shaft sleeve : chrome steel

Features :

• Can withstand wide voltage fluctuation – from 300-440 volts.
• Suction lift up to 7.5 meters.
• Top flat efficiency curve : minimum efficiency variation in the entire operating range
• Efficiency at par with internationally available pumps – higher upto 10 points than minimum required by Indian standards specification
• Models are with IP – 44 protection. Models with IP – 55 protection are also available on request
• Class of insulation 'B' ( 'F' Class for 9.3 kw and 11.0 Kw ratings).
• Designed to prevent overloading and motor burning
• Dynamically balanced rotating parts ensure minimum vibrations
• Replaceable wearing parts results in longer life
• Designed for automatic air release during priming
• Continuous rated motor
• Inside and outside of pump covered by anticorrosive paint

Applications :

• Irrigation.
• Industries for clear water handling
• Water supply for domestic use in apartments, Buildings and hotels.
• MMP Series Three Phase Pumps : Single stage, High speed horizontal, Centrifugal , Monoblock with volute type delivery casing

applications

milk, cream, butter milk, condensed milk

fruit juice, beer, wine, sugar syrup

vitamin solutions, sugar & confectionery.

ro water, dm water, pure water. water for injection (wfi)

vegetable oil, mineral oil, lub oil etc.

pharmaceutical formulations, syrup etc.

alkaline solution / alcoholic drinks.

acids, fine chemicals

bottling plants, soft drinks & distillery

food processing / liquid food stuffs

colour dyes and pigments / paints

descaling applications, paper & cement industries

water treatment plants

detergent, soaps, paste & shampoo

textile sizing, dyeing & finishing systems

natural cellulose fiber / synthetic fiber system

hot & cold water pumping.

features

as all pumps are made from rolled stainless steel, mechanical

properties are far superior than cast material.

pore free, non-pitting and non-adhering smoother surface,

so lesser friction losses, and lesser service corrosion.

super finished surface also ensures no ingress or emission of

germs or impurities during pumping or idling which is a basic

requirement of sterile / hygienic application.

pump can handle liquids having viscosities

up to 1500 centipoises.

pumps are highly energy efficient and requires lesser npsh to

function without cavitation.

the pumps can work under a vacuum of 720 mm of hg,

suitable for vacuum evaporators.

pumps are available with cosed/semi open impellers.

the best elastomers are used in the pumps to provide optimum

resistance for high temperatures and chemicals.

minimum working / rotating parts.

safe and quiet operation levels.

gentle product handling with lower maintenance and

downtime cost.

dynamic combinations of seal faces as per customer's

requirement (single seal / double seal, seal external cooling ).

suitable for standard motor or flange type or foot cum flange

type motor or engine

monoblock or bare pumps or with trolley.

also with flame proof motors.

various types of connection like - tri'clove joints sms, flanges

or threaded nipple/coupling.

pumps with adjustable legs, available on request.

special bearing for hot water application available on request.

located in ahmedabad(india), we are actively involved in bringing forth a high quality array of products in the market. We ensure the products we provide buyers with are as per international quality management systems.

features :

• can withstand wide voltage fluctuation – from 300-440 volts.
• suction lift up to 7.5 meters.
• top flat efficiency curve : minimum variation in efficiency in entire operating range
• efficiency at par with internationally available pumps – higher up to 10 points than minimum required by indian standards specification
• models are with ip – 44 protection. Models with ip – 55 protection are also available on request
• class of insulation ‘b’ ( ‘f’ class for 9.3 kw and 11.0 kw ratings).
• designed to prevent overloading and motor burning
• dynamically balanced rotating parts ensure minimum vibrations
• replaceable wearing parts and hence longer life
• designed for automatic air release during priming
• continuous rated motor
• inside and outside of pump covered  by  anticorrosive paint

applications :

• industries for clear water handling
• water supply for domestic use in apartments, buildings and hotels.
• mmp series three phase pumps : single stage, high speed horizontal, centrifugal , monobloc with volute type delivery casing

range :

• head : 6-52 meters
• capacity : 19.0-2.0 liters per second
• power rating : 0.37 kw to 5.5 kw (0.5 hp to 7.5 hp )

     
material of construction standard supply :

• impeller : cast iron
• delivery casing : cast iron
• motor body : cast iron
• shaft : en -8
• shaft sleeve : ss-410

optional supply :

• impeller : bronze / stainless steel
• shaft : stainless steel
• shaft sleeve : chrome steel