COSMIC

Keelkattalai, Chennai, Tamil Nadu

Application

Designed to use in pressurized under floor air distribution systems. Air supply is a swirling fashion. It can be used any where air is required and pressurized floor plenum is available provides a high induction discharge pattern and dynamic mixing that results in efficient velocity equalization within the occupied zone. This provides a comfortable environment for the occupants and allows the diffusers to be placed within a few feet of a seated occupant. Can be used in commercial office spaces have many areas where floor diffusers can be applied.

Mounting

Directly in an opening made in raised access floors.

Parts and Accessories 1. Circular floor swirl core 2. Damper connector 3. Flow adjustment damper4. Dust collector 5. Carpet ring

Construction :All parts and accessories of Cosmic Make Circular Floor Swirl Diffuser are made of Aluminium Alloy Material so that it is rigid and strong. Designed to with stand a point load up to 400 Kgs after installations. Advantage Quick installation in any raised access floor using spring clips. All components are made of Aluminium including dust collector, making it ideal for all level of office traffic.High induction helical air pattern of the swirl diffuser creates. Ideal circulation without inlet pressure requirements.

Air supply or air return between 2.6mtrs and 4.0 mtrs high in Air-conditioning, Ventilating and Heating systems, Directly to the plenum box by means of hidden fixing systems or replace the false ceiling tile.High quality aluminium sheet construction. Ensure a swift reductions in temperature and flow velocity by means of swirling discharge and the addition of induction air, excellent performance that eliminates drafts and stratification. Rapid entrainment and intermixing capabilities.

Application

Air supply or air return between 2.6mtrs and 4.0 mtrs high in Air-conditioning, Ventilating and Heating systems.

Mounting

Overlapped in false ceiling by means of hidden fixing systems. They all keep the formation of continuous line diffusers with active and inactive areas without breaking the uniformity of the slots.

Implementation

Frames and blades are high quality extruded aluminium profiles. Frame with flat frontal face and vanes in linear layout. Hit and miss dampers available for control the air throw. Available from 1 slot to 10 slots diffuser or more on request. All standard or non-standard sizes are available.

STANDARD FINISHES:

Natural Aluminium, Anodized or Powder coated in standard RAL white colours.

Application

Air supply or air return in between 2.6 meters to 4.0 meters high is Armstrong Tech Zone ceiling systems to give superior performance and asthetics in Airconditioning, Ventilating and Heating systems.

Mounting

Directly replacing the Armstrong Tech zone ceiling tile.

Features

Cosmic make Tech zone diffusers are made of high quality extruded aluminium with powder coated to standard RAL colours. Pattern control designed for easy adjustment of horizontal and vertical throws. Cosmic make Tech zone linear slot diffusers are available in 2 slot and 3 slot configuration to suit the Tegular ceilings ( 8mm drop towards the floor) or flush armstrong ceilings. The direction of discharge can be adopted on site to the required room conditions. Cosmic make Tech zone slotted diffusers are available in two opening sizes 19mm and 25mm with or without hit and miss dampers also with standard or non-standard size plenum boxes.

Sizes

Cosmic make Tech zone diffusers are available in normal grid size: 600mm, 1200mm, 1800mm long and continuous run without breaking the uniformity of the slots and also available in non standard sizes.

STANDARD FINISHES:

Natural Aluminium, Anodized or power coated in standard RAL white

Application

Air supply or air return between 2.6mtrs and 4.0mtrs high in Air-conditioning, Ventilating and Heating systems.

Mounting

Overlapped in false ceiling by means of hidden fixing systems or replacing a false ceiling tile.

Implementation

Extruded aluminium construction. Designed to discharge large volumes of air in all four directions with minimum pressure drop and low sound level. External frame with flat 33mm frontal face and inclined in internal core. centre cores assembly removable type to remove easily for cleaning purpose and for concealed fixing as well as for damper operation. Available in one way, two way, three way or fourway.

Sizes

Standard and non-standard square and rectangular sizes are available. Both flush type and step down models will be made as per the requirements.

STANDARD FINISHES:

Natural Aluminium, Anodized or Powder coated in standard RAL white colours.

Application

Plaque diffuser designs ensure true omni directional air flow as well as quiet, unobtrusive operation. It gives a clean look for your commercial air distribution projects.

Mounting

Overlapped in false ceiling by means of hidden fixing systems or replacing a false ceiling tile.

Implementation

Extruded aluminium construction 360 air distribution offers indirect and high volume air deliverly while providing the clean asthetics prefered by the occupants, external frame with at 33mm frontal face and inclined in internal core, centre core assembly fully conseald and removeable type to remove easily for cleaning consealed fixing and damper operation purpose. Available in all standard or non standard sizes.

STANDARD FINISHES:

Available in natural aluminium, anodireed or powder coated in standard RAC white colours.

Application

Air supply or air return to different heights from 2.6 mtrs to 4.0 mtrs in Air-conditioning, Ventilating and Heating systems. High air handling capacity. Useful in modular ceiling application, where a ceiling tile can be replaced by a round diffuser of any neck size.

Mounting

Overlapped in false ceiling by means of hidden fixing systems or revetted onto a visible circular duct as well as directly on the plenum boxes.

Implementation

Constructed in high grade aluminium. External frame with flat frontal face and angled internal cores. Removable center core assembly can be removed easily for concealed fixing purpose and also for operating the damper by means of screws. For air supply butterfly damper can be revetted on the back side of the diffusers.

STANDARD FINISHES:

Available in Natural Aluminium, Anodized or Powder coated in standard RAL white colours.

Application

Air supply or air return between 2.6 mtrs and 4.0 mtrs high in Air-conditioning, Ventilating and Heating systems.

Mounting

Overlapped in false ceiling by means of hidden fixing systems or by means of visible screws on the flanges. .

Implementation

Extruded aluminium construction. Ideally designed for ceiling installation. High diffusion rates leading to rapid temperature and velocity equalization. Effcient and draft free horizontal air flow pattern. Frame with flat frontal face of 30 mm and 45 degree angled center blades assembly made of aluminium. Available in one way or two way , all standard and non-standard sizes.

STANDARD FINISHES:

Available in Natural Aluminium, Anodized or Powder coated in standard RAL white colours

Application

Air supply between 2.6mtrs and 4.0 mtrs high or air return according to model in Air-conditioning, Ventilating and Heating systems. Suitable for clean rooms in Pharmaceuticals and Hospitals where laminar flow pattern is envisaged.

Mounting

Overlapped in false ceiling by means of hidden fixing systems or replacing a false ceiling tile.

Implementation

High quality aluminium sheet construction. External frame with flat frontal face of 30 mm and internal uniformly punched sheet. Can be available in fixed type or removable type. The perforated panel is removable to ensure easy access for cleaning of filters and air balancing. In all standard or non-standard sizes can be done as per your requirements available with or without collar dampers.

STANDARD FINISHES:

Available in Natural Aluminium, Anodized or Powder coated in standard RAL white colours

Application

Square swirl diffuser with individually adjustable vanes to be used from 2.6mtrs to 4.0 mtrs high in Air-conditioning, Ventilating and Heating systems.

Mounting

Overlapped in false ceiling by means of hidden fixing systems or directly replacing the false ceiling tile as well as directly in the plenum boxes.

Implementation

High quality aluminium sheet construction. Slots punched in a radial layout with individually adjustable black plastic vanes on rear side. Available in standard sizes to fix with plenum boxes. Ensures a swift reduction in temperature and flow velocity by means of swirling discharge and the addition of induction air, excellent performance that eliminates drafts and ratification. Rapid entrainment and intermixing capabilities.

STANDARD FINISHES:

Available in Natural Aluminium, Anodized or Powder coated in standard RAL white colours.

Application

Air supply or air return between 2.6mtrs and 4.0 mtrs high in Air-conditioning, Ventilating and Heating systems

Mounting

Directly to the plenum box by means of hidden fixing systems or replace the false ceiling tile.

Implementation

High quality aluminium sheet construction. Ensure a swift reductions in temperature and flow velocity by means of swirling discharge and the addition of induction air, excellent performance that eliminates drafts and stratification. Rapid entrainment and intermixing capabilities. Aluminium square sheet uniformly punched in a radial layout. Standard outer size of 595 x 595 available with the inner sizes of 21" dia

STANDARD FINISHES:

Available in Natural Aluminium, Anodized or Powder coated in standard RAL white colours.

Application

Air supply between 2.6mtrs and 4.Omtrs high in Air-conditioning, Ventilating and Heating systems. Modern and stylish design, available to suit tile replacement applications.

Mounting

Overlapped in false ceiling by means of hidden Fixing systems or directly to the plenum box to replace the false ceiling tile.

Implementation

High quality extruded aluminium construction. Frame with flat frontal face of 30mm with inside adjustable curved blades to adjust the air throw, available in oneway, twoway, threeway or fourway adjustable types in standard sizes. Delivers signicantly higher air charge rate as compared to conventional diffusers. Excellent performance that eliminates drafts and stratication.

STANDARD FINISHES:

Available in Natural Aluminium, Anodized or Powder coated in standard RAL white colours.

Application

Air supply or Air return in to large spaces. Suitable for use in both industrial and comfort applications like shops, schools and industrial areas in Airconditioning and ventilating systems. In contrast to the well known principle of mixed air flow to achieve the highest possible induction with the principle of displacement flow it involves extract air being taken out at high level. By regularly distributing the displacement diffusers even large halls can have economic airconditioning without draughts.

Mounting

will be fixed in wall mountings and floor mounting with fixing brackets or should be connected with the ducts.

Implementation

1. Displacement diffusers consists of the outer casing, top cover, base plate airconnection Spigot, air control elementand fixing brackets. Outer casing and Aircontrol element of displacement diffusers are high quality aluminium perforated sheet. 2. Top cover, base plate, spigot connections and air control element displacement diffusers generally made from high quality aluminium with or without powder coating finish. Galvanised steel construction also available on request. Fixing brackets are made from galvanized steel constructions.

MODELS & SIZES

The cosmic make displacement diffusers are available in the following models. Semi spherical displacement diffusers suitable for 180 wall mounting. Quarter circle model 900 & 360* suitable for corner installations. Round type displacement diffusers for duct suspended type and for free standing type. Polygon shape also available in 90, 180and 360*models. Rectangular types of plenum types used in for underneath stairways is theaters and All the models can be made in to any standard or non standard sizes.

STANDARD FINISHESAvailable with powder coated in to standard RAL White colours or without powder coating.

Application

Jet Diffusers are to be used for very high ceilings like Airports, Cinema theatres, Shopping malls, Exhibition halls and high roofing industries. For ceiling mounting supply of large quantities of air or side wall installation with very long throws. High air handling capacity with low noise level.

Mounting

Fixing by means of visible metal screws on flanges in sidethrow or to be fixed directly with plenum boxes.

Implementation

Frame and inner rings are made of high quality aluminium . Jet diffusers are mounted in aluminium square plate covered by flanged border. Di ffusers can be adjustable 30 upwards or downwards to achieve required throw as per site conditions.

STANDARD FINISHESAvailable in Natural Aluminium, Anodized or Powder coated in standard RAL white colours.

Application

These diffusers are designed to handle large air volumes on comparatively long throws. They are idealy suited for exposed duct or sidewall applications in large open spaces such as warehouses, factories, auditoriums, sports Halls and swimming pools etc.

Mounting

Fixing by means of visible metal screws on flanges in side throw or to be fixed directly with plenum boxes.

Implementation

A frame with flat frontal face, outer casing of fully extruded and connected with aluminium sheet and inner blade assembly. The angle of dischange can be adjusted through 60 available with or without diffuser mounted opposite blade collar damper available in all standard and nonstandard sizes.

STANDARD FINISHESAvailable in natural aluminium, anodised, (or) powder coated in standard RAL white colours.

Application

Air supply into large spaces like Airports, Cinema theatres, Shopping malls and in high roofing industries. They are specially designed to achieve a long throw in Air-conditioning, Ventilating and Heating systems.

Mounting

Overlapped in the false ceiling by means of hidden fixing systems or revetted on to visible ducts according to the requirements.

Implementation

External ring with a flat circular and spherical inner nozzle manually adjustable to any desired angle within 40. Using the mechanical principle of ball and socket joint made of aluminium and available in the sizes of 75, 100, 200, 300 Et 400mm respectively with or without collar dampers.

STANDARD FINISHESAvailable in Natural Aluminium, Anodized or Powder coated in standard RAL white colours.

Application

High performance circular swirl diffusers are designed especially for spaces with a height of more than 3.6 mtrs high with varying heat loads. Can be suitable for use in industrial and comfort conditioning environments, such as airport, theatres, auditorium, stadium and factories etc. Due to the rotary swirling motion of the air discharge. Induction of room air occurs very quickly.

Mounting

Fixed directly with plenum boxes by means of screws or directly with the round ducts.

Material of Construction and Advantages

Cosmic Make High Performance Circular Swirl Diffuser with blades are constructed of spun aluminium sheet.Suitable for both horizontal and vertical throws in HVAC Systems. Rapid swirl discharge gives longer throw distance and high air handling capacity. Large dynamic and high induction suitable for cooling at very low temperature.

Available sizes

The standard available sizes are 315 mm Dia, 500 mm Dia, 400 mm Dia, 630 mm Dia and 800 mm Dia.

Standard Finishes

Available in standard RAL White Colour, other shades also available on request.