Our Products
Machine And Precision Tools
2 Products availableHose Pipes
1 Products availablePulleys
1 Products availableBearings And Bearing Components
1 Products availableRubber Pad
1 Products availableIndustrial & Engineering Products
1 Products availableJigs, Casting Dies, Die Casting Moulds & Moulding Tools
1 Products availableExpansion Joints
1 Products availableOur Complete range of products are Rubber Lining Tank, rubber screens and Rubber lining of tanks vessels pipes and fittings etc..
CORIRUBBERRubber screens are well suited for use in both mining and mineral preparation. They perform well when subjected to both wet and dry conditions. |
Why RUBBER? |
|
RUBBER SCREENS |
CORIRUBBERRubber screens comes in handy for dust control, weight reduction, corrosion resistance, easy to install and easily customizable. |
Constant pounding of rocks and ore in quarries and mines shortens the life of the perforated plate or wire cloth screens. Impacting stones cause noise that is detrimental to both employees and the neighboring community. When screening rocks and other dry material plugging is another nuisance. Changing of heavy steel screens may require a crane or extra manpower. |
Rubber Screen are ideal for handling the toughest and most abrasive materials such as crushed stones, gravel, coal, slag and etc. Rubber materials provide flexibility, strength, impact absorption, demonstrate, superior cut and tear resistance as well as extended life for reduced down time and facilitate fast and easy installation. |
CORIRUBBERscreens offer a practical, economical solution to such difficulties in applications that range from scalping to mid range sizing. |
Rubber compounds used in screens are designed to reduce the coefficient of friction and to suit to the operating conditions where moisture content is high and blinding has been of major concern. Once installed, blinding is eliminated and screening efficiency is vastly improved. |
Modular |
RUBBER SCREENS |
|
Cori belongs to the IGP Group of Companies based in Chennai (Madras), India. Products range includes Rubber expansion joints, Anti vibration mounts, Rubber sheets, Rubber lining services for anti-corrosive application & Pulley lagging.
PERFORMANCEAND CONSTRUCTION FEATURES |
|
These are available in two different sizes. The smaller size has a stud on one side while the larger one has no stud. Two numbers of these mounts are used as the rubber springs in each of the quickfoot CORIRUBBER- 503 mountings These can be loaded either in compression or in shear and withstand loads upto 1000kg in compression and upto 200 kg in shear. |
CORIRUBBERhoses combine the latest materials and construction techniques with expertise in engineering rubber. CORIRUBBERhoses have been engineered and testedrigorously in the lab and on field to ensure long life and reliable service. |
The industry's widest selections of hoses are available under theCORIRUBBERbrand. |
CORIRUBBERHose is a specially engineered product to achieve: |
|
MANUFACTURING & TESTING FACILITIES |
|
Cori has been a specialist in rubber lining having bagged many prestigious jobs. We undertake rubber lining both at our customer's site as well as in our factory. |
We undertake rubber lining activities for all kinds of tanks, vessels, pipes and fitting and valves. |
Rubber lining for |
|
RUBBER SHEETS |
CORI manufactures a comprehensive range of rubber sheets for general, industrial and mining applications. It includes vulcanised black and coloured sheets for technical uses and industrial application with or without textile insertion, with smooth surfaces or with a canvas-type print on one or both sides. |
Sheets are available in various size and thickness to withstand a temperature range between -40C and +250C conforming to international standards and customer requirements. |
These sheets are made from polymers and their blends of Natural Rubber, SBR, Neoprene, Nitrile, EPDM, Butyl, Hypalon, Vitonand Silicon Rubbers. * Trademark of Dupont. |
PULLEY LAGGING |
|
CORIRUBBERElastomeric Bearing Pads |
Elastomeric Bridge Bearing Pads is a block of vulcanized elastomers reinforced internally by one or several steel plates, chemically bonded during vulcanization. . |
External Forces being supported |
Elastomeric bearings permit the simultaneous support of the following loads :. |
|
Elastomeric bearings are made out of chloroprene polymer. These bearing pads are designed for used in bridges and other structures such as buildings as a vertical load bearing component. There are manufactured from high quality material with number of layers of steel plates depending on the type of bearings highly strong and extremely resistance to weathering, ageing with almost no influence from UV radiation and ozone.Neoprene bearing pads provide uniform transfer of load from beam to structure. They absorb vibration and prevent noise transfer. While reducing the destructive action of vibration between movable and stationery structural members. They permit beam rotation at the bearing point due to deflection or misalignment. May also provide for movement caused by normal expansion and contraction and concrete creep effects and shrinkage. These pads are extensively in bridge structures. These pads provide good resistance to traction, excellent failure strain and performs well with dynamic loads. It has good rear resistance, excellent resistance to aging and a very low load bearing creep rate. This makes it suitable for the requirements of bearings. |
Laminated Elastomeric Bearings |
Type A : |
Single reinforcement Bearing (Not used in civil Engineering structure). |
Type B : |
The definition for type B according to EN 1337-3 is ; this type has (n+1), reinforcement /metal and (n) elastomeric of constant thickness with perimeter at least 4 millimetres thick and the upper and lower faces with a nominal 2.5mm thickness of elastomeric. The tolerance is (-0 and +2). |
Other Type B : |
By definition these are different in that the upper and lower elastomeric coatings are thicker. This type of bearing is no longer straightforward reinforcement protected by elastomeric, but designed on the basis of required ability such as Elastomeric a Half Lamination or Passive Coating types. |
Type C : |
Elastomeric bearings with two external plates and threaded holes for use onmetal structures, or as an anti-lift device: in this latter case, suitable anchor bars must be fitted to the bearings for anchoring purposes. |
Type D : |
Elastomeric bearings with external plates and pins that connect to suitable steel plates in order to secure the bearing to the structure. |
Type E : |
Elastomeric bearings with two suitably etched external plates to facilitate the bearings bonding to the structure by way of vulcanisation. |