Film Fills are the most efficient filling media available for cooling towers. The usage of film fills in both counterflow and crossflow cooling towers allows relatively smaller sized towers to cool an equivalent amount of water compared to cooling towers using splash fills. This results in the saving of not only capital costs for a new tower but also reduces operational costs on account of lower height and hence lower pumping costs. Film Fills work on the principle of offering heat exchange by spreading the falling water droplets into a thin molecular film where the air can effectively contact the entire surface of the water film to carry away heat and mass.

Armed with an installed annual capacity of more than 5000 Tons, COOLDECK provides thin films (150 microns to 800 microns) in PVC and PP as well as thick sheets (0.8mm to 3mm) in PVC.

With a primary focus on opaque thin film applications, the PVC material is produced on our brand new calender line with unparalleled process controls in maintaining constant thickness. Serving application areas such as thermoforming, printing and cards, we can offer customized formulations tailor made to meet any specific requirements of mechanical properties, colours or surface finish.

• Outdoor Advertising/Signage Boards

• Exhibit booth panels/Store fixtures

• Furniture tops

• Door/Window laminates

• Seat bottoms

• Refrigeration

• Vehicle Manufacturing

• Corrosion resistant tanks

• Ducts and Fume hoods

SCS aerodynamically designed Aerofoil axial flow fans manufactured from high quality epoxy grade FRP material save up to 30% power as compared to aluminum fans. SCS fans achieve the best performance keeping power consumption and noise levels to the minimum possible. Aerodynamic axial flow FRP fans manufactured by COOLDECK are specially designed for high-efficiency, critical applications, which include Cooling Towers, Humidification and Exhaust systems.

SCS aerodynamically designed Aerofoil axial flow fans manufactured from high quality epoxy grade FRP material save up to 30% power as compared to aluminum fans. SCS fans achieve the best performance keeping power consumption and noise levels to the minimum possible.

Aerodynamic axial flow FRP fans manufactured by COOLDECK are specially designed for high-efficiency, critical applications, which include Cooling Towers, Humidification and Exhaust systems.

• Tough light weight hollow FRP blades

• Non-corrosive and erosion resistance

• Different standard pitch angles/adjustable pitch angles

• Wide range of industrial air moving applications

• High efficiency and low noise levels

• Aerodynamically designed for maximum airlift and minimum air resistance

• The unique aerofoil design ensures high efficiency, lower noise levels and less power consumption

• Reinforced Fiberglass Epoxy Resin (FRP) provides the desired non-corrosive quality to the fan blades, resulting the operation of fans even in the most aggressive environment.

• The design of the fans provides high air volume with optimum pressure to ensure the long distance reach in the farthest areas.

• The hollow construction of blades makes the fan lightweight resulting into low starting torque and reduced power consumption under varying load conditions. This causes minimum wear and stress on motor bearings and drive shafts.

• By varying chord width and angle of incidence along the length of the blade SCS fans yield significantly higher performance than constant-chord-width fans as they develop constant velocities along the full blade length.

• SCS FRP Fans with pitch control enable the field technicians to change pitch settings easily in order to optimize fan performance or to change field applications.

COOLDECK range of Wood-Plastic Composite (WPC) profiles change the way one thinks of external decking and cladding. Our range of decking and cladding option combines the proven strength of high density plastic and wood fibers. With an outer shell of plastic this completely encapsulates the board in an impermeable layer of protection from scratches, stains and fading.

Combining unmatched corrosion resistance with strength, long life and safety, COOLDECK sets the standard for fiberglass reinforced plastic (FRP) moulded products. COOLDECK products are proven to deliver years of reliable service, even in the most demanding corrosive conditions conditions which cause conventional metallic and wood products to deteriorate rapidly.

COOLDECK FRP Grating as compared with other floor materials like Metal, PVC or RCC, provides a series of benefits, unmatched superior impact resistance, while the strength-weight ratio is only one fourth of that of steel gratings. Hence FRP gratings are easy to handle, cut and install and can be customized to customers requirements as per site condition, utility application and weathering conditions.

Architectural uPVC louvers are featured prominently over the exterior faade of the building there by increasing the aesthetic value of the faade. COOLFin louvers are made from UV stabilized uPVC. They can be ordered to exact sizes and are packaged with the supporting members that will be installed on the building surface. uPVC is the material of choice in building projects all across the world with established advantages over other materials such as concrete, aluminum or steel.

The design team at COOLDECK relentlessly strives to create and achieve an elegant aesthetic look with the uPVC louvers /fins to complement the overall design of the building.

• Enhance architectural appeal of the building.

• Allow significant amount of light in the building while reducing ill effects of direct heat

• Create a visual block but yet allow passage of cool air there by reducing energy cost.

• Inexpensive solution compared to alternate high quality materials.

• Available in UV stabilized colors to match the other components of the facade

• Project pipes and ducts from the ill effects of direct sunlight.

• Reduce heat absorption in the building structure.

• Can be installed in new or existing building.

SCS aerodynamically designed Aerofoil axial flow fans manufactured from high quality epoxy grade FRP material save up to 30% power as compared to aluminum fans. SCS fans achieve the best performance keeping power consumption and noise levels to the minimum possible.Aerodynamic axial flow FRP fans manufactured by COOLDECK are specially designed for high-efficiency, critical applications, which include Cooling Towers, Humidification and Exhaust systems.

COOLDECK Tube Settler systems are fast replacing conventional sedimentation systems in the pre and post treatment of wastewater as well as in river water clarification. These systems have been used have been designed to handle volumes upto 500 MLD and have been in successful use since almost two decades. COOLDECK offers the following products in the tube settler system.

Film Fills are the most efficient filling media available for cooling towers. The usage of film fills in both counterflow and crossflow cooling towers allows relatively smaller sized towers to cool an equivalent amount of water compared to cooling towers using splash fills. This results in the saving of not only capital costs for a new tower but also reduces operational costs on account of lower height and hence lower pumping costs. Film Fills work on the principle of offering heat exchange by spreading the falling water droplets into a thin molecular film where the air can effectively contact the entire surface of the water film to carry away heat and mass.

Armed with an installed annual capacity of more than 5000 Tons, COOLDECK provides thin films (150 microns to 800 microns) in PVC and PP as well as thick sheets (0.8mm to 3mm) in PVC.

With a primary focus on opaque thin film applications, the PVC material is produced on our brand new calender line with unparalleled process controls in maintaining constant thickness. Serving application areas such as thermoforming, printing and cards, we can offer customized formulations tailor made to meet any specific requirements of mechanical properties, colours or surface finish.

• Outdoor Advertising/Signage Boards

• Exhibit booth panels/Store fixtures

• Furniture tops

• Door/Window laminates

• Seat bottoms

• Refrigeration

• Vehicle Manufacturing

• Corrosion resistant tanks

• Ducts and Fume hoods

SCS aerodynamically designed Aerofoil axial flow fans manufactured from high quality epoxy grade FRP material save up to 30% power as compared to aluminum fans. SCS fans achieve the best performance keeping power consumption and noise levels to the minimum possible. Aerodynamic axial flow FRP fans manufactured by COOLDECK are specially designed for high-efficiency, critical applications, which include Cooling Towers, Humidification and Exhaust systems.

SCS aerodynamically designed Aerofoil axial flow fans manufactured from high quality epoxy grade FRP material save up to 30% power as compared to aluminum fans. SCS fans achieve the best performance keeping power consumption and noise levels to the minimum possible.

Aerodynamic axial flow FRP fans manufactured by COOLDECK are specially designed for high-efficiency, critical applications, which include Cooling Towers, Humidification and Exhaust systems.

• Tough light weight hollow FRP blades

• Non-corrosive and erosion resistance

• Different standard pitch angles/adjustable pitch angles

• Wide range of industrial air moving applications

• High efficiency and low noise levels

• Aerodynamically designed for maximum airlift and minimum air resistance

• The unique aerofoil design ensures high efficiency, lower noise levels and less power consumption

• Reinforced Fiberglass Epoxy Resin (FRP) provides the desired non-corrosive quality to the fan blades, resulting the operation of fans even in the most aggressive environment.

• The design of the fans provides high air volume with optimum pressure to ensure the long distance reach in the farthest areas.

• The hollow construction of blades makes the fan lightweight resulting into low starting torque and reduced power consumption under varying load conditions. This causes minimum wear and stress on motor bearings and drive shafts.

• By varying chord width and angle of incidence along the length of the blade SCS fans yield significantly higher performance than constant-chord-width fans as they develop constant velocities along the full blade length.

• SCS FRP Fans with pitch control enable the field technicians to change pitch settings easily in order to optimize fan performance or to change field applications.

COOLDECK range of Wood-Plastic Composite (WPC) profiles change the way one thinks of external decking and cladding. Our range of decking and cladding option combines the proven strength of high density plastic and wood fibers. With an outer shell of plastic this completely encapsulates the board in an impermeable layer of protection from scratches, stains and fading.

Combining unmatched corrosion resistance with strength, long life and safety, COOLDECK sets the standard for fiberglass reinforced plastic (FRP) moulded products. COOLDECK products are proven to deliver years of reliable service, even in the most demanding corrosive conditions conditions which cause conventional metallic and wood products to deteriorate rapidly.

COOLDECK FRP Grating as compared with other floor materials like Metal, PVC or RCC, provides a series of benefits, unmatched superior impact resistance, while the strength-weight ratio is only one fourth of that of steel gratings. Hence FRP gratings are easy to handle, cut and install and can be customized to customers requirements as per site condition, utility application and weathering conditions.

Architectural uPVC louvers are featured prominently over the exterior faade of the building there by increasing the aesthetic value of the faade. COOLFin louvers are made from UV stabilized uPVC. They can be ordered to exact sizes and are packaged with the supporting members that will be installed on the building surface. uPVC is the material of choice in building projects all across the world with established advantages over other materials such as concrete, aluminum or steel.

The design team at COOLDECK relentlessly strives to create and achieve an elegant aesthetic look with the uPVC louvers /fins to complement the overall design of the building.

• Enhance architectural appeal of the building.

• Allow significant amount of light in the building while reducing ill effects of direct heat

• Create a visual block but yet allow passage of cool air there by reducing energy cost.

• Inexpensive solution compared to alternate high quality materials.

• Available in UV stabilized colors to match the other components of the facade

• Project pipes and ducts from the ill effects of direct sunlight.

• Reduce heat absorption in the building structure.

• Can be installed in new or existing building.

SCS aerodynamically designed Aerofoil axial flow fans manufactured from high quality epoxy grade FRP material save up to 30% power as compared to aluminum fans. SCS fans achieve the best performance keeping power consumption and noise levels to the minimum possible.Aerodynamic axial flow FRP fans manufactured by COOLDECK are specially designed for high-efficiency, critical applications, which include Cooling Towers, Humidification and Exhaust systems.

COOLDECK Tube Settler systems are fast replacing conventional sedimentation systems in the pre and post treatment of wastewater as well as in river water clarification. These systems have been used have been designed to handle volumes upto 500 MLD and have been in successful use since almost two decades. COOLDECK offers the following products in the tube settler system.