Control Devices

Jogeshwari, Mumbai, Maharashtra

The Side Mounted Magnetic Level Switch system has a side mounted flange. The float is constructed from the material suiting the fluid in the tank. When the fluid level raises above the desired point the float prop up and actuates the magnetic switch which is kept inside the stem. The closure of the switch indicates the level rise or decrease. Side Mounted Magnetic Level Switch can operate in most fluids and it requires minimum maintenance.

Applications :

• High Low level signals for alarm annunciation
• Safety interlock circuits Automatic Pump Control
• Solenoid Value Control
• Prevention of tank overflows
• Pump safeguard against dry running

The Inclined Tube Manometer is portable and it has CVG solid acrylic fabricated from 1 inch thick acrylic plastic solid block. The Inclined Tube Manometer is vertically unbreakable, stable and free from any distortion. We provide Inclined Tube Manometer with PVC plastic engraved scale, zero adjusting knob, level bottom and panel mounting holes. The Inclined Tube Manometer is available in different range from 10 mm wg to 200 mm wg.

Attributes :

• Durable
• Portable
• CVG solid acrylic
• Unbreakable

The Side Mounted Magnetic Level Indicator provides a reliable and safe indication for hazardous liquids kept under high pressure. The Side Mounted Magnetic Level Indicator is commonly used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is manufactured using SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the vessel raises the float it moves the connecting pipe to the reach of visibility on top.

Applications :

• Corrosive acids : oleum, H2SO4
• HNO3, Acetic
• Solvents : bezene, toluene, alcohols, CS2.
• Liq. Gases : LPG, NH3, Chlorine.
• Propylene, Butadiene.
• Veg.Oils, Fuel Oils, Lubricants, Water
• Poisonous / toxic liquids, DMA, TEA, PCL3.SO3
• Rotoball Option

Accessories :

• High & Low level Alarm.
• Resistance Strip with 4-20 m Amp. output

The Sight Flow Indicators is commonly used for visual liquid level observation. The Sight Flow Indicator is a simple and reliable device used for direct reading in atmospheric or pressurized tank applications.

Available in :Full view, double window, single window with flapper, rotary wheel and in drip tube design, suitable for different type of fluids.

Type of Connection : Screwed or Flanged.

Available Sizes : 12 NB to 250 NB

Primary standard U Tube Manometer is used for precise measurement of pressure, vacuum, differential pressure, and flow measurement in plants and labs where optimum accuracy is required. The U Tube Manometer is measure the pressure difference in orifices located in the airflow in air handling or ventilation system.

Attributes :

• Available in wall mounted & stand mounted.
• Ranges in mm :  50-0-50 to 250-0-250 mm
• Efficient
• Accurate

The Tubular Glass Level Indicator is commonly used for visual liquid level observation. The Tubular Glass Level Indicator is a simple and reliable device used for direct reading in atmospheric or pressurized tank applications. The Tubular Glass Level Indicator is mounted parallel, at the side of the tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication.

Technical Specification :  New Bolted Gland with teflon packing ensures positive leak tightness for full vacuum as well as 10kg/cm2 pressure service.

Sturdy Protection : Glass tube is protected by box section made out of two M.S. channels Beam strength of the guard is so good that even if man stands on the indicator supported at two ends, the tube remains intact.

Light Weight :

• 75% less in weight compared to Reflex and Transparent liquid level indicators
• Extraordinary strength but less bulky

Excellent Visibility :

• 16/19/25mm O.D Borosilicate glass gives excellent visibility
• Surface tension effects are eliminated

Test Pressure : Full vacuum and/or 10 kg/cm^² compressed Air

Attributes :

• Liquid indicator
• Durable
• Excellent quality
• Reliable

The Single Limb Manometer is a direct reading manometer for the precise measurement of pressure, vacuum different pressure flow and liquid level measurement. The Single Limb Manometer is available in different sizes as per the requirement of the client. The Single Limb Manometer is a simple device that facilitates direct and accurate reading.

Attributes :

• In wall mounted and stand mounted
• Range from 0-100 to 0-500
• Acrylic Body ( CVG / SLM )
• Metallic Body ( CVG / SLMM

The Top Mounted Magnetic Level Indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The Top Mounted Magnetic Level Indicator basically consists of a guide pipe, float with stem main magnet, a guard protecting magnet guide tube, follower magnet and glass tube, the guide pipe inserted in the tank, guides the float which follows the liquid level in the tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rise the float, which buoys up, moves the connecting pipe to the region of visibility on top. The entire construction of Top Mounted Magnetic Level is very sturdy keeping in mind its outdoor installation.

Applications :

• Dipstick substitute
• Underground tanks
• Horizontal tanks
• Corrosive acids
• Liquefied Gases

Float Operated Liquid Level Switch reliably detects the fluid level in the tank. Float Operated Liquid Level Switch can be installed in tanks with small dimensions or limited space. The Float Operated Liquid Level Switch can be mounted on the side of the vessel or tank. The Float Operated Liquid Level Switch is constructed with high grade material for tough industrial use.

Attributes :

• Reliable
• Accurate measurement
• Compact
• Affordable

Technical Specification :
Suitable for online installation with flanged or screw connection with several
options of materials for wetted parts.