The Side Mounted Magnetic Level Indicator provides a reliable and safe indication for hazardous liquids kept under high pressure. The Side Mounted Magnetic Level Indicator is commonly used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is manufactured using SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the vessel raises the float it moves the connecting pipe to the reach of visibility on top.

Applications :

• Corrosive acids : oleum, H2SO4
• HNO3, Acetic
• Solvents : bezene, toluene, alcohols, CS2.
• Liq. Gases : LPG, NH3, Chlorine.
• Propylene, Butadiene.
• Veg.Oils, Fuel Oils, Lubricants, Water
• Poisonous / toxic liquids, DMA, TEA, PCL3.SO3
• Rotoball Option

Accessories :

• High & Low level Alarm.
• Resistance Strip with 4-20 m Amp. output

The Tubular Glass Level Indicator is commonly used for visual liquid level observation. The Tubular Glass Level Indicator is a simple and reliable device used for direct reading in atmospheric or pressurized tank applications. The Tubular Glass Level Indicator is mounted parallel, at the side of the tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication.

Technical Specification :  New Bolted Gland with teflon packing ensures positive leak tightness for full vacuum as well as 10kg/cm2 pressure service.

Sturdy Protection : Glass tube is protected by box section made out of two M.S. channels Beam strength of the guard is so good that even if man stands on the indicator supported at two ends, the tube remains intact.

Light Weight :

• 75% less in weight compared to Reflex and Transparent liquid level indicators
• Extraordinary strength but less bulky

Excellent Visibility :

• 16/19/25mm O.D Borosilicate glass gives excellent visibility
• Surface tension effects are eliminated

Test Pressure : Full vacuum and/or 10 kg/cm^² compressed Air

Attributes :

• Liquid indicator
• Durable
• Excellent quality
• Reliable

The Top Mounted Magnetic Level Indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The Top Mounted Magnetic Level Indicator basically consists of a guide pipe, float with stem main magnet, a guard protecting magnet guide tube, follower magnet and glass tube, the guide pipe inserted in the tank, guides the float which follows the liquid level in the tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rise the float, which buoys up, moves the connecting pipe to the region of visibility on top. The entire construction of Top Mounted Magnetic Level is very sturdy keeping in mind its outdoor installation.

Applications :

• Dipstick substitute
• Underground tanks
• Horizontal tanks
• Corrosive acids
• Liquefied Gases

The Side Mounted Magnetic Level Indicator provides a reliable and safe indication for hazardous liquids kept under high pressure. The Side Mounted Magnetic Level Indicator is commonly used as a direct local level indicator mounted on the top of the vessel or RCC tank. The float is manufactured using SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the vessel raises the float it moves the connecting pipe to the reach of visibility on top.

Applications :

• Corrosive acids : oleum, H2SO4
• HNO3, Acetic
• Solvents : bezene, toluene, alcohols, CS2.
• Liq. Gases : LPG, NH3, Chlorine.
• Propylene, Butadiene.
• Veg.Oils, Fuel Oils, Lubricants, Water
• Poisonous / toxic liquids, DMA, TEA, PCL3.SO3
• Rotoball Option

Accessories :

• High & Low level Alarm.
• Resistance Strip with 4-20 m Amp. output

The Tubular Glass Level Indicator is commonly used for visual liquid level observation. The Tubular Glass Level Indicator is a simple and reliable device used for direct reading in atmospheric or pressurized tank applications. The Tubular Glass Level Indicator is mounted parallel, at the side of the tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication.

Technical Specification :  New Bolted Gland with teflon packing ensures positive leak tightness for full vacuum as well as 10kg/cm2 pressure service.

Sturdy Protection : Glass tube is protected by box section made out of two M.S. channels Beam strength of the guard is so good that even if man stands on the indicator supported at two ends, the tube remains intact.

Light Weight :

• 75% less in weight compared to Reflex and Transparent liquid level indicators
• Extraordinary strength but less bulky

Excellent Visibility :

• 16/19/25mm O.D Borosilicate glass gives excellent visibility
• Surface tension effects are eliminated

Test Pressure : Full vacuum and/or 10 kg/cm^² compressed Air

Attributes :

• Liquid indicator
• Durable
• Excellent quality
• Reliable

The Top Mounted Magnetic Level Indicator is used as a direct local level indicator mounted on the top of the vessel or RCC tank. The Top Mounted Magnetic Level Indicator basically consists of a guide pipe, float with stem main magnet, a guard protecting magnet guide tube, follower magnet and glass tube, the guide pipe inserted in the tank, guides the float which follows the liquid level in the tank. The float is made out of SS304/ SS316/ PP/ PVDF/ PTFE/ PVC etc. As the level inside the tank rise the float, which buoys up, moves the connecting pipe to the region of visibility on top. The entire construction of Top Mounted Magnetic Level is very sturdy keeping in mind its outdoor installation.

Applications :

• Dipstick substitute
• Underground tanks
• Horizontal tanks
• Corrosive acids
• Liquefied Gases