Our Products
Rubber Sheet
2 Products availableElevators
2 Products availableConveyors
1 Products availableConveyors & Conveyor Components
1 Products availableIndustrial Chemicals
1 Products availableLeading Manufacturer, Supplier & Retailer of Chemical Resistant Conveyor Belts, heat resistant belts, Food Grade Conveyor Belt, general conveyor belt and Best Fire Resistant Belts.
Continental Belting Pvt Ltd is an ISO9001 (2015) certified and We have been providing world-class Chemical Resistant Conveyor Belts to the high profile Industrial Giants like ACC, Ultratech Cement, Steel Authority of India, Reliance Energy, Godrej, Thermax, Vedanta, UHDE, HCC, Adani, Gujarat Ambuja, JSW Steel, AIS Glass, Saint Gobain and many others.
Indications for the slope angle:All our products are manufactured as per the standards of DIN, BS, AS, SANS, JIS, IS etc. to meet the demands of our clients from various parts of the world. Our Chevron Conveyor Belts are exported to more than 45 countries including Iran, Saudi Arabia, UAE, Qatar, Kuwait, Oman, Jordon, Mauritius, United Kingdom, Egypt, Nigeria, South Africa, Oman, Tanzania, DR Congo, Kenya, Muscat and many more.
Chevron Conveyor Belts Salient Features:Continental Belting, have developed, the specialist PyroShield range of Heat-resistant belts, with covers that resists cracking and hardening. PyroShield belting performs over the long run, retaining its flexibility despite punishing conditions and loads. Less cracking and hardening translates into longer life and reduced replacement costs. High-temperature resistance to tearing and abrasion. Load after load, PyroShield stands up to prolonged exposure. This reduced maintenance and downtime helps lower overall operating costs.
PyroShield provides superior performance under extreme heat conditions. The PyroShield compounds retain their heat-resistant qualities after prolonged exposure to hot loads from (200-300C).
Pyroshield 250 & 350 Grades, shall have a Fibre Glass shield , just above the tensile member, which shall act as a string deterrent, against through holes caused, due to red hot material.
OIL & GREASE RESISTANT CONVEYOR BELTS (OR GRADE)
Continental Belting offers White Food Grade Conveyor & Elevator Belting manufactured, as per IS:1891 (Part IV); suited for handling food materials, directly on the belt surface. These belts are white in colour and do not transfer any odour or colour to the food products handles.
Our Food Grade Belts are available in two distinct type of compositions, the first made from natural rubber, suited for non oil / acidic / reactive materials, and the second is the special synthetic rubber based compound suited for any oily or chemically active food products, such as meat, fruits & vegetables, free flowing sugar, any items with high moisture content, etc.
Similar rubber cover grades are also available for elevator applications, such as grain handling, free flowing sugar, animal feed etc.
Most popular applications, include operations in the sugar industry, tea industry, , grain elevators etc.
M24 - Our range of M24 (24MPa) Conveyor Belts are abrasion resistant and highly resistant to cuts and gouges. These are mainly used in all mining industries and process industries such as cement (limestone), steel (crushed metallic ores), stone crushing industries (granite & blue metal).
N17 - Our range of N17 (17Mpa) Conveyor Belts are abrasion resistant, however applications not requiring the same cut and gouge resistance as that of the M24 Grade. These conveyors belts are mainly used for conveying bauxite, asbestos, ash, chalk, cement, lime, Surface coal etc.
To break the ripping momentum; limiting any longitudinal cutting and tearing
COVER GRADE CHARACTERISTICS AND APPLICATION | PHYSICAL PROPERTIES | |||||||
General Purpose Belting | Standard | Before Ageing | After Ageing | |||||
Tensile Strength |
Elongation % |
Tempe- rature of Ageing ºC |
Duration of Ageing hours |
Change in Tensile Strength % |
Change in Elong- ation % |
Maximum Abrasion
Loss Mm3 |
||
GRADE M-24 | ||||||||
This Grade is recommended for conveying heavy, sharp, highly abrasive materials like metallic ores, granite, lime stone, coal, Blast furnace slag & clinker etc. | IS 1891 PART-I BS 490 PART-I ISO 4195/1 DIN 22102 | 24 | 450 | 70 | 72 | +10-20 | +10-25 | 150 |
GRADE N-17 | ||||||||
Recommended for conveying less severe and moderately abrasive material like sized coal, ash, chalk, bauxite etc. | IS 1891 PART-I BS 490 PART-I ISO 4195/1 DIN 22102 | 17 | 400 | 70 | 72 | +10-20 | +10-25 | 150 |
GRADE N-17 SYNTHETIC | ||||||||
Composed of Synthetic Rubber mainly, this grade is suitable for arduous application as M-24 and has similar wear resistance properties. | IS 1891 PART-I | 17 | 400 | 70 | 72 | +10-20 | +10-25 | 150 |
HEAT RESISTANT BELTING |
Standard & Grade | Minimum Tensile Strength (Mpa) | Minimum Elongation at Break (%) |
Maximum Abrasion Loss (mm³) |
DIN-X | 25 | 450 | 120 |
AS-M | 24 | 450 | 125 |
IS -M24 | 24 | 450 | 150 |
BS -M24 | 24 | 450 | 150 |
SANS - M | 24 | 450 | 120 |
SANS - N | 20 | 400 | 150 |
DIN - Y | 20 | 400 | 150 |
AS - N | 17 | 400 | 200 |
1S -N17 | 17 | 400 | 200 |
BS - N17 | 17 | 400 | 150 |
RMA 1 | 17 | 450 | 150 |
JIS -S | 18 | 450 | 200 |
Continental Belting Pvt Ltd have been one of the most prominent manufacturer, supplier and exporter of Fire Resistant Belts in India. Our Fire Resistant belts are supplied to almost each part of the country including hundreds of cities in various states and export them to our client from more than 45 countries like Iran, Saudi Arabia, UAE, Qatar, Kuwait, Oman, Jordon, Mauritius, United Kingdom, Egypt, Nigeria, South Africa, Oman, Tanzania, DR Congo, Kenya, Muscat and many more.
Fire resistant conveyor belts are specifically used for risk free internal transportation like within a building, mine or tunnel where the environment have explosive substances like Coal dust, Gas, Fertilizers and other combustible materials.
Fire resistant belting at Continental Belting Pvt Ltd are made flame resistant as well as static conductive belts for the application of conveying in the industries like:
Since its establishment in 1984 Continental Belting Pvt Ltd has evolved and prospered with our ever increasing number of satisfied customers. Today we have a group Turnover 134.35Crore and various industrial giants like ACC, Ultratech Cement, Steel Authority of India, Reliance Energy, Godrej, Thermax, Vedanta, UHDE, HCC, Adani, Gujarat Ambuja, JSW Steel, AIS Glass, Saint Gobain etc. as our convinced clients for years.
Salient features:
Cover Type | Standards | Minimum Tensile Strength (MPA) | Minimum Elongation (%) | Abrasion | Material Covered |
---|---|---|---|---|---|
Fire Resistant Belts | SANS-F | 17 | 350 | 180 | Material with fire hazards, e.g. Coal |
IS-1891(FR Grade) | 17 | 350 | 200 | ||
ISO-340(FR Grade) | 17 | 350 | 180 | ||
AS-F(FR Grade) | 14 | 300 | 200 | ||
AS-1332(FR Grade) | 14 | 300 | 200 | ||
DIN S Grade | 17 | 350 | 180 | ||
DIN K Grade | 17 | 400 | 200 | ||
MSHA-FR | 17 | 350 | 200 | ||
CAN/CSA(FR Grade) | 17 | 350 | 200 |
Cover Rubber Property | ||
---|---|---|
Tensile Strength / MPA | Elongation at break / % | Abrasion / mm3 |
≥18 | ≥450 | ≤200 |
≥16 | ≥400 | ≤250 |
Continental Belting PVT LTD manufacture, supply and export a wide range of general duty Belts as per the industrial requirements and that of our clients. Our General Duty Belts are abrasion resistant and highly resistant to the cuts and gouges. We have been supplying and exporting our ISO9001 (2015) certified General Duty Belts to almost every state of India and over 45 countries since 1984.
Our General Duty Belts have various applications in wide range of Industries like mining industry and process industries such cement(limestone), steel (crushed metallic ores), stone crushing industries (granite & blue metal).Our production is aided with CAD (Computer-Aided Design)/CAM (Computer-Aided Manufacturing) Facility for Proprietary Belt Selection & Simulation.
To meet the International standards such as DIN, BS, AS, SANS, JIS, IS, etc. Continental Belting PVT LTD uses best in the class raw material to manufacture our Belts. Continental Belting PVT LTD has been ET Now Leaders of Tomorrow Awards Nominee.
General Duty Belts Salient Features:
COVER GRADE CHARACTERISTICS AND APPLICATION | PHYSICAL PROPERTIES | |||||||
---|---|---|---|---|---|---|---|---|
General Purpose Belting | Standard | Before Ageing | After Ageing | |||||
Tensile Strength MPa | Elongation % | Temperature of Ageing �C | Duration of Ageing hours | Change in Tensile Strength % | Change in Elongation % | Maximum Abrasion Loss Mm3 | ||
GRADE M-24 | ||||||||
This Grade is recommended for conveying heavy, sharp, highly abrasive materials like metallic ores, granite, lime stone, coal, Blast furnace slag & clinker etc. | IS 1891 PART-I BS 490 PART-I ISO 4195/1 DIN 22102 | 24 | 450 | 70 | 72 | +10-20 | +10-25 | 150 |
GRADE N-17 | ||||||||
Recommended for conveying less severe and moderately abrasive material like sized coal, ash, chalk, bauxite etc. | IS 1891 PART-I BS 490 PART-I ISO 4195/1 DIN 22102 | 17 | 400 | 70 | 72 | +10-20 | +10-25 | 150 |
GRADE N-17 SYNTHETIC | ||||||||
Composed of Synthetic Rubber mainly, this grade is suitable for arduous application as M-24 and has similar wear resistance properties. | IS 1891 PART-I | 17 | 400 | 70 | 72 | +10-20 | +10-25 | 150 |
HEAT RESISTANT BELTING |
International Grades & Standards | |||
---|---|---|---|
Standard & Grade | Minimum Tensile Strength (Mpa) | Minimum Elongation at Break (%) | Maximum Abrasion Loss (mm3) |
DIN-X | 25 | 450 | 120 |
AS-M | 24 | 450 | 125 |
IS -M24 | 24 | 450 | 150 |
BS -M24 | 24 | 450 | 150 |
SANS – M | 24 | 450 | 120 |
SANS-N | 20 | 400 | 150 |
DIN-Y | 20 | 400 | 150 |
AS-N | 17 | 400 | 200 |
1S-N17 | 17 | 400 | 200 |
BS-N17 | 17 | 400 | 150 |
RMA 1 | 17 | 450 | 150 |
JIS -S | 18 | 400 | 200 |
For the application of conveying of the substances at sub-zero temperature is a very difficult purpose. And it is made accessible by the Cold Resistant Conveying Belts manufactured by Continental Belting Pvt Ltd. When the ambient temperature falls below 0oc rubber begins to lose its elasticity, its property to resist abrasion, impact and cutting and even the rubber in the carcass begin to crack.
The purpose of Cold Resistant Belts is to make conveying of materials economically feasible outdoor in the freezing areas and inside the cold storage.
Since 1984 Continental Belting have been supplying its world-class Cold Resistant Conveyor Belts to our clients all over India. Our conveying belts are the exporter to more than 45 countries like Iran, Saudi Arabia, UAE, Qatar, Kuwait, Oman, Jordon, Mauritius, United Kingdom, Egypt, Nigeria, South Africa, Oman, Tanzania, DR Congo, Kenya, Muscat and many more.
Cold Resistant Belts Salient Features:Pipe or Tube conveyor belts are primarily used where bulk materials must be conveyed along horizontal and vertical curves in confined spaces, and/or where the environment has to be protected resp. where spillage must be avoided.
The belt can negotiate tight horizontal and vertical curves. This eliminates or reduces transfer points, which is a big cost saving. Inclinations of up to 35 can be dealt with.
Pipe conveyor belts protect the conveyed material from external influences like rain and wind and protect the environment by avoiding spillage of the conveyed material. Even in the bottom run, no spillage will occur, because the carry side is inside of the tube. The idler supports can be spaced farther apart, because it is self-supporting. An additional conveyor cover is not necessary.
Some of the salient features of Pipe Conveyor Belts
Pipe dia. |
Load area |
Belt speed |
Conveying |
Max. lump |
Horizontal |
Equivalent |
100 |
0.006 |
100 |
36 |
30 |
15 |
300 |
150 |
0.013 |
120 |
95 |
30-50 |
18 |
300-450 |
200 |
0.024 |
130 |
185 |
50-70 |
20 |
500-600 |
250 |
0.037 |
140 |
310 |
70-90 |
23 |
600-750 |
300 |
0.052 |
150 |
475 |
90-100 |
25 |
750-900 |
350 |
0.072 |
175 |
750 |
100-120 |
30 |
900-1050 |
400 |
0.095 |
200 |
1140 |
120-150 |
35 |
1050-1200 |
450 |
0.150 |
225 |
2000 |
150-200 |
50 |
1500-1800 |
500 |
0.215 |
250 |
3200 |
200-250 |
50 |
1500-1800 |
550 |
0.285 |
275 |
4700 |
250-300 |
60 |
1800-2000 |
600 |
0.425 |
300 |
7650 |
300-400 |
70 |
2000-2400 |
Rapid industrialization has increased the need use of conveyor belts for the transportation of materials from initial raw material to finished products. Rubber conveyor belts are commonly used to convey items with irregular bottom surfaces, small items that would fall in between rollers or bags of product that would sag between rollers.It is often lightweight, durable and wears resistant.
Maharashtra based Continental Belting PVT. LTD was established in 1984 and since then we have been the prominent manufacturer, supplier and exporter of Conveyor Belts. All our Rubber Conveyor Belts are ISO9001 (2015) certified and are manufactured on the standards set up by the DIN, BS, AS, SANS, JIS, IS, etc.Common industries which use these include-
Our Rubber Conveyor Belts are highly demanded by the all the well-established perfection demanding companies like ACC, Ultratech Cement, Steel Authority of India, Reliance Energy, Godrej and many more from all over India.
Applications for this type of Rubber Conveyor Belt Belting include:Food Grade Conveyor Belts are specifically used for the transportation of food products for their high hygienic properties. Established in 1984, Maharashtra based Continental Belting Pvt Ltd has been one of the most prominent manufacturer, supplier and exporter of best in class ISO9001 (2015) certified Food Grade conveyor belts.
Working under the leadership of our CEO/Managing Director Mr Deepak Arora, a team of highly professionals and expertise in the field of 84 employee. The team at Continental Belting Pvt Ltd accomplish the feat of over 2500 meters production per day.
Continental Belting Pvt Ltd Provide precisely manufactured white food grade conveyor as well as elevator belting. Our belts are available in white colour finish and do not transfer any odour as well as colour contamination to food products is handled.
Application:Big names in the Indian market like Godrej, UHDE, Adani, Vedanta etc. prefer the Food Grade Conveyor Belts manufactured by Continental Belting Pvt Ltd.
Our Conveyor Belts are even exported to the international clients from the countries like Iran, Saudi Arabia, UAE, Qatar, Kuwait, Oman, Jordon, Mauritius, and United Kingdom.
Food Grade Conveyor Belts Salient features:resistance
Rough top Conveyor Belting manufactured by Continental Belting Pvt Ltd are available in two as well as three ply construction choices that also feature cut edges as well as carcass of NN/EP fabric which comes with surface texture that aids in resisting the tendency for material to roll back down the conveyor while at transportation stage.
Continental Belting Pvt Ltd is a Maharashtra based ISO9001 (2015) certified company. We are one of the most prominent manufacturer, supplier and exporter of Rough Top Conveyor Belts.
All our conveyor belts are are tested as per DIN & IS1891 and are manufactured as per the standards of DIN, BS, AS, SANS, JIS, IS etc.
Our Rough Top Conveyor Belts are supplied to many well know Industrial giants like exported to more than 45 countries all over the world.
Rough Top Conveyor Belts are used for the application of:Steel Cord Conveyor Belts are suitable for conveying heavy load materials for long distance. Rubber penetrates perfectly among steel cords through open steel cord that minimizes corrosion of belts. Steel cords also ensure higher elongation allowing excellent energy absorption in the event of impact.
Steel Cord Conveyor Belts are excessively used in the industries like:
Continental Belting Pvt Ltd is an ISO9001 (2015) certified company and we have been manufacturing Steel cord conveying Belts since 1984. Our products are qualified as per the standards set up by EN ISO 15236, DIN22131, SANS1366 and AS1333.
Many high profile local Industries like ACC, Ultratech Cement, Steel Authority of India, Reliance Energy, Godrej, Thermax, Vedanta, UHDE, HCC, Adani, Gujarat Ambuja, JSW Steel, AIS Glass, Saint Gobain and many others are our satisfied regular clients. Our Steel Cord Conveying Belts are supplied to hundreds of cities all over India and are even exporter to more than 45 countries all around the world.
Salient features:ontinental Belting, manufactures a wide range of rubber conveyor belts, however, if your application requirement is unique, and calls for a tailor made belt, our engineers can also create a custom product to fit your requirements. We have at our disposal, the worlds best, belt fabrication facility, with high pressure vulcanizing bays, punching / perforating presses, buffing & grinding machines, in-house machining and mould making.
A combination of a team of highly skilled & experienced engineers and technicians, in conjunction with the worlds best equipment, ensures a world beating fabricated conveyor belt.
Item | Tensile Strength /Mpa ≥ | Elongation at break /% ≥ | Abrasion /mm3 ≤ | Hardness /(°)+10-5 | Ozone deterioration | ||
Cover | Physical property | Before aging | 14 | 400 | 250 | 60 | No cracks |
After aging | 12 | 340 | - | 65 | - | ||
Acid and alkali resistance | Class | Soak liquid | Density | Soak conditions | Change rate before and after soak | ||
°C x h | Swelling rate | Change rate of tensile strength | |||||
A1 | HCL | 18% | 50°C x 96h | ≤+10% | ≤-10% | ||
A2 | H2SO4 | 50% | 50°C x 96h | ≤+10% | ≤-10% | ||
A3 | NaOH | 48% | 50°C x 96h | ≤+10% | ≤-10% |
HOR Conveyor Belting is manufactured specially for applications, where there is a combination of heat & oil exposure, in areas, such as Bitumen / Hot Mix Plants.
Used in coal, ore, port, metallurgical, power and chemical industries, suitable for long distance and heavy load transportation of materials.
Standards offered are DIN22131, EN ISO 15236, SANS1366 and AS1333.
Cover Compounds:
|
ST1000 | ST1250 | ST1600 | ST2000 | ST2500 |
Minimum step length mm) | 300 | 350 | 400 | 450 | 500 |
Splice length (mm) | 600 | 650 | 750 | 1150 | 1350 |
ST3150 | ST3500 | ST4000 | ST4500 | ST5000 | |
Minimum step length (mm) | 650 | 650 | 750 | 800 | 900 |
Splice length (mm) | 1650 | 2350 | 2650 | 2800 | 4050 |
BeltSpecifications | ST1000 | ST1250 | ST1600 | ST2000 | ST2500 | ST3150 | ST3500 | ST4000 | ST4500 | ST5000 | ST5400 |
Tensile Strength (N/mm) | 1000 | 1250 | 1600 | 2000 | 2500 | 3150 | 3500 | 4000 | 4500 | 5000 | 5400 |
Max. Diameter of Cord (mm) | 4.1 | 4.9 | 5.6 | 5.6 | 7.2 | 8.1 | 8.6 | 8.9 | 9.7 | 10.9 | 11.3 |
Pitch (mm) +1.5 | 12 | 14 | 15 | 12 | 15 | 15 | 15 | 15 | 16 | 17 | 17 |
Min. Rubber Cover Thickness (mm) | 4 | 4 | 4 | 4 | 5 | 5.5 | 6 | 6.5 | 7 | 7.5 | 8 |
Width (mm) | Tolerance (mm) | Cord Number | |||||||||||||||||||
500 | +5 | 39 | 34 | ||||||||||||||||||
650 | +7 | 51 | 44 | 40 | 51 | 40 | 40 | 40 | 40 | 37 | |||||||||||
800 | +8 | 64 | 55 | 50 | 64 | 50 | 50 | 50 | 50 | 46 | 43 | 43 | |||||||||
1000 | +10 | 81 | 69 | 64 | 81 | 64 | 64 | 64 | 64 | 59 | 55 | 55 | |||||||||
1200 | +10 | 97 | 84 | 77 | 97 | 77 | 77 | 77 | 77 | 71 | 66 | 66 | |||||||||
1400 | +12 | 114 | 98 | 90 | 114 | 90 | 90 | 90 | 90 | 84 | 78 | 78 | |||||||||
1600 | +12 | 131 | 112 | 104 | 131 | 104 | 104 | 104 | 104 | 96 | 90 | 90 | |||||||||
1800 | +14 | 147 | 127 | 117 | 147 | 117 | 117 | 117 | 117 | 109 | 102 | 102 | |||||||||
2000 | +14 | 164 | 141 | 130 | 164 | 130 | 130 | 130 | 130 | 121 | 113 | 113 | |||||||||
2200 | +14 | 181 | 155 | 144 | 181 | 144 | 144 | 144 | 144 | 134 | 125 | 125 | |||||||||
2400 | +15 | 197 | 169 | 157 | 197 | 157 | 157 | 157 | 157 | 146 | 137 | 137 | |||||||||
2600 | +15 | 214 | 184 | 170 | 214 | 170 | 170 | 170 | 170 | 159 | 149 | 149 | |||||||||
2800 | +15 | 231 | 198 | 184 | 231 | 184 | 184 | 184 | 184 | 171 | 161 | 161 | |||||||||
3000 | +15 | 247 | 212 | 197 | 247 | 197 | 197 | 197 | 197 | 184 | 172 | 172 | |||||||||
3200 | +15 | 264 | 227 | 210 | 264 | 210 | 210 | 210 | 210 | 196 | 184 | 184 |
This belt can be supplied in cotton canvas, nylon canvas or EP canvas as carcass. Cover rubber is a blend of NR and BR, which has high elasticity, shock resistance, cold resistance etc, It can work @ -40C. Usage: Suitable for conveying materials outdoors in freezing area, cold storage, etc.
Item | Index | |||
H | D | L | ||
Tensile Strength / Mpa ≥ | 24 | 18 | 15 | |
Breaking Elongation / % ≥ | 450 | 400 | 350 | |
Ageing experiment (70°C, 7d) | Change rate of tensile strength / % | ±25 | ±25 | ±25 |
Change rate of breaking elongation / % | ±25 | ±25 | ±25 | |
Abrasion / mm3 ≤ | 120 | 100 | 250 | |
Cold resistant coefficient at elongate ≥ | C1(-45°C) | 0.3 | ||
C2(-50°C) | 0.2 | |||
Note: C1-- temperature condition is -45°C~+50°C; C2-- temperature condition is -60°C~+50°C |
The product is made of Nylon carcass or EP carcass and finished through the process of calendaring, assembling, vulcanizing etc, suitable for conveying materials that require a flame resistant and static conductive belts in power, chemical, light, metallurgical and grain processing industries, under the condition of flammable or explosive environment above coal mines.
Cover Type | Standards | Minimum Tensile Strength (MPA) | Minimum Elongation (%) | Abrasion | Material Covered |
Fire Resistant |
SANS-F | 17 | 350 | 180 |
Material with fire hazards, e.g. Coal |
IS-1891 (FR Grade) |
17 | 350 | 200 | ||
ISO-340 (FR Grade) |
17 | 350 | 180 | ||
AS-F (FR Grade) |
14 | 300 | 200 | ||
AS-1332 (FR Grade) |
14 | 300 | 200 | ||
DIN S Grade |
17 | 350 | 180 | ||
DIN K Grade |
17 | 400 | 200 | ||
MSHA-FR | 17 | 350 | 200 | ||
CAN/CSA (FR Grade) |
17 | 350 | 200 |
Tensile Strength / MPA | Elongation at break / % | Abrasion / mm3 |
≥18 | ≥450 | ≤200 |
≥16 | ≥400 | ≤250 |
Construction:Two or three ply construction with cut edges and carcass of NN or EP fabric. The surface texture resists the tendency for the material to roll back down the conveyor.
The top cover is made of wear-resistant rubber with a non-slip surface. It has cushioning effect, mollifies and absorbs vibrations and impacts given on transported materials and simultaneously prevents slipping.
Available with bottom cover or bare back for slider bed applications. Although it depends on the transported materials, transportation at inclination angles 25 30 are feasible.
Application: Rough top conveyor belt is used for transporting light weight goods, such as sacks, boxes and parcels, on inclined surface at angles of maximal 35 degree. Typical Applications are for lorry loaders, belt flight loaders, etc.
Continental Belting Pvt Ltd. is a Maharashtra based manufacturer, supplier and exporter of Conveyor Belts. Since 1984, we have been providing world class Chemical Resistant Conveyor Belts to the high profile Industrial Giants like ACC, Ultratech Cement, Steel Authority of India, Reliance Energy, Godrej, Thermax, Vedanta, UHDE, HCC, Adani, Gujarat Ambuja, JSW Steel, AIS Glass, Saint Gobain and many others.
Working under the leadership of our CEO/Managing Director Mr Deepak Arora, a team of highly professionals and expertise in the field of 84 employee. The team at Continental Belting Pvt Ltd accomplish the feat of over 2500 meters production per day.
Continental Belting Pvt Ltd. have been manufacturing, supplying and exporting high quality and durable Chemical resistant conveyor belts to our customers from hundreds of cities in India and to more than 45 countries around the world likeIran, Saudi Arabia, UAE, Qatar, Kuwait, Oman, Jordon, Mauritius, United Kingdom, Egypt, Nigeria, South Africa, Oman, Tanzania, DR Congo, Kenya, Muscat and many more.
Chemical Resistant Belting are highly used in the industries where the conveyor belts are used for conveying corrosive materials that comprises acid as well and alkali like:
Technical Indexes | |||||||
---|---|---|---|---|---|---|---|
Item | Tensile Strength /Mpa = | Elongation at break /% = | Abrasion /mm3 = | Hardness /(o)+10-5 | Ozone deterioration | ||
Cover | Physical property | Before aging | 14 | 400 | 250 | 60 | No cracks |
After aging | 12 | 340 | – | 65 | – | ||
Acid and alkali resistance | Class | Soak liquid | Density | Soak conditions | Change rate before and after soak | ||
oC x h | Swelling rate | Change rate of tensile strength | |||||
A1 | HCL | 18% | 50oC x 96h | =+10% | =-10% | ||
A2 | H2SO4 | 50% | 50oC x 96h | =+10% | =-10% | ||
A3 | NaOH | 48% | 50oC x 96h | =+10% | =-10% |