Consort Digital Private Limited

Mehrauli, Delhi

The TetraFlex Outdoor System is the most user-friendly, flexible and cost-effective TETRA infrastructure system available. With its high reliability and unique design it is the ideal solution for mission critical communications, even in the harshest environments.Full network flexibilityThe TetraFlex system is scalable and can handle from small single site solutions with local coverage to large-scale multisite solutions, using any combination of outdoor or indoor TetraFlex base station. Together with the intelligentTetraFlex software, simple and smooth site expansion is possible, even while in operation. 100% IP-based technology provides full architectural network flexibility with all network components connected in a single state-of-the-art infrastructure without the need of a central switch. Easy to install - anywherePlug and play simplicity enables easy setup and fast deployment. With its IP65 protection the TetraFlex Outdoor BaseStation is ideal for installation in harsh environments. A compact design enables direct mounting on antenna masts, buildings and towers, reducing feeder loss and installation costs considerably, while also providing an ideal solution for rapid, vehicle-based deployment. Secure and failure tolerantFeaturing full support for battery backup as well as redundant controllers and carriers, TetraFlex meets your highest requirements on reliability. The intelligent distributed architecture replicates information to all sites in the network, avoiding any single point of failure.

The high capacity TetraFlex Indoor System is the most userfriendly, flexible and cost-effective TETRA infrastructure system available. With its high reliability and unique design it is the ideal solution for mission critical communications.Full network flexibilityThe TetraFlex system is scalable and can handle from small single site solutions with local coverage to large-scale multisite solutions, using any combination of outdoor and indoor TetraFlex base stations. Together with the intelligent TetraFlex software, simple and smooth site expansion is possible, even while in operation. The 100% IP-based technology provides full architectural network flexibility with all network components connected in a single state-of-the-art infrastructure without the need of a central switch. High Capacity. High EfficiencyThe TetraFlex Indoor Base Stations can be configured with up to 16 TETRA carriers giving in total 64 time slots with access to all functions and terminals from the front. Excellent receiver sensitivity is achieved with the Tower Mounted AmplifierDuplexer by eliminating receiver cable loss. Used as TMD it further gives the possibility to operate with dual diversity, using only two antennas. The TetraFlex Indoor Base Stations are characterised by extremely low power consumption. The TetraFlex Indoor Base Station can optionally be delivered as a high output power version. Secure and failure tolerantFeaturing full support for battery backup as well as redundant controllers, power supplies and carriers, TetraFlex meets your highest requirements on reliability. The intelligent distributed architecture replicates information to all sites in the network, avoiding any single point of failure.

The TetraFlex Dispatcher provides features for increased efficiency in organizations managing a fleet of subscribers with then needs of command, control and monitoring of radio communications.Simplicity With simplicity as the key for all products developed by DAMM, the TetraFlex Dispatcher is exclusively tailored to the TetraFlex Infrastructure system allowing you to be instantly up running with dispatcher functionalities. Efficient Operation With the TetraFlex Dispatcher the operator can set-up and monitor any individual-, group- and broadcast calls and perform discrete and ambience listening. The TetraFlex Dispatcher is able to handle the entire fleet of subscribers and monitor up to 32 voice streams at the same time with simultaneous voice and data messages. User Friendly Interface Dispatcher functionalities are easily accessed through the multi lingual user-friendly and intuitive graphical user interface, without needs of extensive training programs for operator. GPS tracking The TetraFlex Dispatcher offers GPS-based tracking of subscribers on maps providing the operator an easy overview of his fleet.

Developed exclusively for the TetraFlex Network the TetraFlex Voice and Data Log System instantly provides comprehensive and accurate voice- and data recording facilities, as well as a wide range of logging facilities for Call Data Records (CDR).The TetraFlex Voice and Data Log System consists of three parts: the TetraFlex Log Server for recording and storage of voice, data and CDR, the TetraFlex Log Client for retrievement and re-play of voice and data, and the Log API for passing real-time call data to third party logging systems. Reconstruction of emergency incidents For the reconstruction of emergency and mission critical situations the user-friendly functionalities and comprehensive set of Call Data Records (CDR) deliver rapid and accurate incident reconstructions. The comprehensive search criteria allow you to choose between replaying voice or the content of SDS records between specific subscribers or groups and within defined time intervals or selected priorities. Also, information about registered subscribers and position of mobiles at the time of the incident is available.The flexible solution The Log Server and Log Client can be connected anywhere in the TetraFlex Infrastructure network through the IP connectivity. The TetraFlex System supports attachment of more Log Servers to one system, and each Log Server can be set up individually to log independent groups of data or be used as redundant Log Server. Depending on the network load and recording requirements the Log Server may be installed directly on the TetraFlex Base Station Controller, or on servers or work stations. Each Log Server can be configured to serve individual needs and can be accessed by multiple Log Clients, or passing log data to thirdparty logging systems through the Log API.Radio Network optimization

The TetraFlex Group Bridge enables you to perform group calls between any independent TETRA or analogue networks, creating valuable interoperability between many different systems.Total communications flexibility TetraFlex Group Bridge is a highly flexible solution. It can be used to perform group calls and SDS messages between independent networks, from one TetraFlex network to any other TETRA network, or even from TETRA to analogue networks. Bringing clarity to complex situations The TetraFlex Group Bridge solution is suitable for creating any cross-organisational communication between organisations that are normally organized on different networks. Typical examples include links between military, police and other emergency units, or even between local, regional or national networks during catastrophes and other mission critical operations. It could also provide an ideal solution for construction sites, where several contractors need to be connected to the main network. With the TetraFlex Group Bridge, you can also connect portable TETRA solutions in remote locations to the main network, or extend your main network with indoor coverage. The TetraFlex Group Bridge also gives an advantage in supporting features for soft migration from an analogue to digital TETRA networks.In short, the TetraFlex Group Bridge can support any communications interoperability challenge you set it.

Consort On-Board Controller (OBC) is a cost effective yet versatile solution for enhanced critical communication for the transportation industry. The OBC combines all voice and data subs systems installed in a mobile asset and provides easy and reliable integration to the telecom and signalling systems installed at wayside through TETRA or other reliable mobile broadband communication system. Consort On-Board Controller is designed to support integration of multiple on board subsystems for data acquisition, information transportation within on-board systems and way side control room subsystems over the TETRA infrastructure. Specific attention has been given to all aspects that make up a robust Linux distribution. Voice and data from multiple On-board devices are integrated through the Consort On-Board Controller to support the following functionalities: Automatic Detection of Driver and Guard CabinActive Active Redundancy between Driver and Guard CabinEnhanced Train Location Reporting Services for Train SignalingHelp Point Call Escalation to Control RoomPublic Announcement Calls from Control RoomAutomated Public Information Display Messaging from PIS Server

Consort Radio Integration Server (RIS) provides integration of all data interchange between TETRA Communication System with Train Control System (TCS) and Passenger Information System (PIS). The RIS handles all protcol translation between the TETRA Communication System and the Signalling system. In addition, the RIS also maps all relevant Identifiers such as Train ID, Radio ID, ATP ID, Permanent Vehicle ID and On Board Controller ID. The RIS also integrates Passenger Information Server (PIS) to deliver data from the wayside PIS to On-board Passenger Information Display System (PIDS)

DAMM's Field Mobile TetraFlex (FMT) solution is a fully functional two-carrier TETRA communication system. Housed in a 19" modular cassette, it has been specifically designed for field deployable solutions. Its convenient size and form factor mean that it can be easily built-in to trucks, cars, containers or other mobile units. Rapid deployment in even the toughest situations The FMT system offers a flexible, mobile and compact TETRA system with very low power consumption. Its convenient size means that it can be rapidly and easily deployed in the field to respond to fastchanging demands in location, capacity and coverage. The system has been designed to meet the very highest security, safety and reliability requirements, especially in situations where people's lives and safety depend upon reliable communications.Mission-critical capability comes as standard The FMT system has already been successfully deployed in military field operations, by army, air forces and in rapid deployment exercises. The increasingly fast-paced and hightech military environment places extremely tough demands on communications systems, and the ability to coordinate and combine resources and rapidly disseminate accurate information is crucial. FMT is also ideal for a wide range of less dramatic but sometimes vital applications, including offshore deployment, humanitarian relief work, event management, on-campus communications, and much more.Easy scalability and complete interoperability FMT allows full scalability or integration into larger multi-site networks. This is achieved by connecting the system to other FMT racks or existing TetraFlex networks via the IP-based network infrastructure. FMT is also capable of performing group calls to any other TETRA or even analogue network, regardless of manufacturer, via the optional TetraFlex Group Bridge solution.

Damm's rapid deployable tetraflex (rdt) solution has been specially designed for first-responder emergency and security services. Housed in a tough wheeled suitcase for maximum mobility, rdt offers a fully functional high-powered tetra communication system that can be instantly deployed in any situation. Powerful tetra communications on demand damm's rapid deployable tetraflex (rdt) solution is a fully featured, preconfigured mobile tetra system. among its wide range of potential uses, rdt is particularly effective in emergency situations like road accidents, natural disasters or search and rescue operations in remote rural areas. Rdt can be easily transported to where it's needed and made fully operational almost instantly - regardless of whether there is any existing network in the area.Self-contained, robust and secure the fully self-contained rdt system comes in its own rugged case for easy and secure transportation, and can be deployed under even the most extreme environmental conditions. For optimal mobility, the suitcase is mounted on wheels and equipped with a telescopic handle. Rdt enables first-responder emergency or security services to instantly set up a robust and fully configured communications system on site, which can then serve as a reliable temporary command centre for radio users in the field. Rdt also supports important security applications, such as temporary deployment during vip visits or special conferences. The system has been designed to meet the very highest security, safety and reliability requirements, especially in situations where people's lives and safety depend upon reliable communications.

MoovManage is a hosted management service that allows you to remotely monitor and configure a network of Moovbox devices, control user access to Wi-Fi services, and receive real-time reporting on device status, performance, usage and location.

The Cat B15 thrives on a challenge. Its made of tough stuff hard knocks, scratches, water and dust dont bother it. Its also very smart. It runs Android 4.1 (Jelly Bean) and is loaded with features like Wi-Fi, an FM radio, media player and file storage can be expanded using microSD cards. The 5MP camera captures the action with one-press continuous shooting; or use video to get the full story with sound and motion. The Cat B15 thrives on a challenge. Its made of tough stuff hard knocks, scratches, water and dust dont bother it. Its also very smart. It runs Android 4.1 (Jelly Bean) and is loaded with features like Wi-Fi, an FM radio, media player and file storage can be expanded using microSD cards. The 5MP camera captures the action with one-press continuous shooting; or use video to get the full story with sound and motion.