We offer automatic stirrup bender stppro. Fully automatic stirrup bender. Stppro. the machine accepts pre-straightened bars of full length. stirrups are formed as per the program and then parted (cut). the machine can process bars in size 810 x 2bars, 1216 single bar. cycle time for a typical small size stirrup is 5 to 6 cycles per minute. the machine is computer controlled, where programs are tested and stored. a program can be recalled and the machine is set for production run. the machine uses advanced technology with proportional electro-hydraulics. mitubishi controls, and standard hydraulics, which ensures high reliability and best performance. Installed power 5hp. machine overall size: 2100 x 850 x 2100 height.

We are offering programmable stirrup bender. The machine accepts angles and length between each bend as a program to form a particular stirrup profile. multiple such programs are stored in the memory. recalling the program from the memory the correct bar length is displayed, pre-cut bar is then formed to the precise shape as per the program. The drive system is electro-hydraulic with all standard parts and mitsubishi plc & hmi. The upright table is a convenient working height, and facilitates large size stirrup forming. The powerful bending gear can handle multiple bars enhancing production rate. With this arrangement the machine can produce large quantities of perfect stirrups and store 100 programs ready for recall and start production.

We are offering hydraulic operated automatic rebar cutting machine. Cutpro32 max bar size : 32x500 grade steel. multiple bar capable : 8, 10, 12, 16 x two bars simultaneous the bar length is set on the controller, the machine automatically cuts the set length. typical production capacity : 20 to 50t per shift, assuming normal industry requirements. installed power : 7.5hp (5.8kw). features : easy to use, low operating height, stroke counter, length check facility. optional : plc controlled. size and weight : 1200x1300x1000ht. Weight: 2t. notes : standard electro-hydraulic system parts, reliable and easy to maintain.

We are offering reinforcing steel cutting machine - v series. A versatile machine for cutting multiple bars, the vertical cutting action which makes it particularly suitable to feed multiple bars. the operating height is nominally elevated to align the machine with conveyors or simple bar support pedestal to set up factory like production environment. An automatic self adjusting bar-clamp is provided which has several merits in machine working, blade life and cutting quality. The cutting tool is multiple edged; just rotate the blade for a fresh cutting edge. From maintenance point of view, the electro-hydraulics is very basic and simple where nominal skills can manage repairs. The system parts are standard easily available in nearby hydraulic stores. These machines are produced in large batches, under tight quality checks and thoroughly tested before shipment. The machine properly installed and used with some primary care, is good for many years of service life. This model is available in two variants viz. V32 and v40.

We are offering reinforcing steel cutting machine - vc series. A versatile machine for high rebarmachinesion bar-cutting, where in the operating height is at eye level, features an automatic bar-clamping arrangement. With a well prepared cutting- bay this machine is ideal for multiple bar cutting in large production runs, factory installations. The cutting tool is multiple edged; just rotate the blade for a fresh cutting edge. From maintenance angle, the electro-hydraulics is very basic and simple where nominal skills can manage repairs. The system parts are standard easily available in nearby hydraulic stores. These machines are produced in large batches, under tight quality checks and thoroughly tested before shipment, the machine properly installed and used with some primary care, is good for many years of service life. Custom built larger capacity machines also offered in this design.

We are offering reinforcing steel bar cutting machine - m series. A compact and light weight, horizontal acting cutting machine, the drive mechanism is electro-mechanical type; the compact construction of this machine makes it ideal for typical congested construction sites. The cutting tool is multiple edged, just rotate the blade for a fresh cutting edge. These machines are produced in large batches, under tight quality checks and thoroughly tested before shipment, the machine properly installed and used with some primary care, is good for many years of service life.

We offer automatic stirrup bender stppro. Fully automatic stirrup bender. Stppro. the machine accepts pre-straightened bars of full length. stirrups are formed as per the program and then parted (cut). the machine can process bars in size 810 x 2bars, 1216 single bar. cycle time for a typical small size stirrup is 5 to 6 cycles per minute. the machine is computer controlled, where programs are tested and stored. a program can be recalled and the machine is set for production run. the machine uses advanced technology with proportional electro-hydraulics. mitubishi controls, and standard hydraulics, which ensures high reliability and best performance. Installed power 5hp. machine overall size: 2100 x 850 x 2100 height.

We are offering programmable stirrup bender. The machine accepts angles and length between each bend as a program to form a particular stirrup profile. multiple such programs are stored in the memory. recalling the program from the memory the correct bar length is displayed, pre-cut bar is then formed to the precise shape as per the program. The drive system is electro-hydraulic with all standard parts and mitsubishi plc & hmi. The upright table is a convenient working height, and facilitates large size stirrup forming. The powerful bending gear can handle multiple bars enhancing production rate. With this arrangement the machine can produce large quantities of perfect stirrups and store 100 programs ready for recall and start production.

We are offering hydraulic operated automatic rebar cutting machine. Cutpro32 max bar size : 32x500 grade steel. multiple bar capable : 8, 10, 12, 16 x two bars simultaneous the bar length is set on the controller, the machine automatically cuts the set length. typical production capacity : 20 to 50t per shift, assuming normal industry requirements. installed power : 7.5hp (5.8kw). features : easy to use, low operating height, stroke counter, length check facility. optional : plc controlled. size and weight : 1200x1300x1000ht. Weight: 2t. notes : standard electro-hydraulic system parts, reliable and easy to maintain.

We are offering reinforcing steel cutting machine - v series. A versatile machine for cutting multiple bars, the vertical cutting action which makes it particularly suitable to feed multiple bars. the operating height is nominally elevated to align the machine with conveyors or simple bar support pedestal to set up factory like production environment. An automatic self adjusting bar-clamp is provided which has several merits in machine working, blade life and cutting quality. The cutting tool is multiple edged; just rotate the blade for a fresh cutting edge. From maintenance point of view, the electro-hydraulics is very basic and simple where nominal skills can manage repairs. The system parts are standard easily available in nearby hydraulic stores. These machines are produced in large batches, under tight quality checks and thoroughly tested before shipment. The machine properly installed and used with some primary care, is good for many years of service life. This model is available in two variants viz. V32 and v40.

We are offering reinforcing steel cutting machine - vc series. A versatile machine for high rebarmachinesion bar-cutting, where in the operating height is at eye level, features an automatic bar-clamping arrangement. With a well prepared cutting- bay this machine is ideal for multiple bar cutting in large production runs, factory installations. The cutting tool is multiple edged; just rotate the blade for a fresh cutting edge. From maintenance angle, the electro-hydraulics is very basic and simple where nominal skills can manage repairs. The system parts are standard easily available in nearby hydraulic stores. These machines are produced in large batches, under tight quality checks and thoroughly tested before shipment, the machine properly installed and used with some primary care, is good for many years of service life. Custom built larger capacity machines also offered in this design.

We are offering reinforcing steel bar cutting machine - m series. A compact and light weight, horizontal acting cutting machine, the drive mechanism is electro-mechanical type; the compact construction of this machine makes it ideal for typical congested construction sites. The cutting tool is multiple edged, just rotate the blade for a fresh cutting edge. These machines are produced in large batches, under tight quality checks and thoroughly tested before shipment, the machine properly installed and used with some primary care, is good for many years of service life.