Our offered Product range includes Amf Panel, Capacitor Panel, Main Lt Panel and Synchronizing Panel.
AMF Panel
We are engaged in offering an advanced AMF Panel range that is designed and manufactured in line with international quality standards. The Auto Mains Failure Panel is tested stringently on various parameters under expert supervision. The actual sharing, starting, stopping and transfer of load depends on load, and not on voltage & current, due to the programming in the AMF Panel which is based on load in KW. Reduces Efforts Required For :
We are positioned among the major Capacitor Panel Manufacturers, Suppliers and Exporters from India. In the Capacitor Panels the Auto power factor correction of loads takes place by centralized means. The total power of each piece of equipment is divided in several banks managed by an APFC relay. The latter is sensitive to variations in reactive power and connects or disconnects the banks maintaining the PF of the system at desired value. Salient Features :
Auto/manual selection of banks with indication
Forced air cooling of banks with axial flow fans
The range of power goes from 25 KVAR to 1000 KVAR
Tripping with audio visual indication under high voltage
High temperature, harmonic over load, and low PF condition
Construction :
Floor mounted and is designed to be used where medium high power is required.
Mach smart energy analyzer is filled to check the capacitor current voltage for each phase separately, plus all value added features of Mach Smart.
RS 232 serial port is provided on the panel to connect it to PC or hand held terminal for data logging.
The unit is equipped with FSU at the beginning of the power supply.
Earth fault protection is provided to disconnect the banks in case of fault.
The cabinet has IP-30 protection with gray RAL 7035 structure with powder coated finish. Busbars are tinned electrolytic copper with 50 kA breaking capacity.
Main LT Panel manufactured by us is used in main incomer supply distribution to another power distribution board. The Main LT Panels are provided in various designs meant for different commercial and industrial establishments. The meticulously designed Main LT Panel undergoes strict testing and can be manufactured in accordance with needs of the clients. We Offer :
Main LT Panels, with single power source
Main LT Panels with multi power sources (EB + DG sets)
Specifications :
415V, AC Supply, 65kA.
Main LT panel / PCC with single / Multiple Incomers, bus couplers, with proper interlocking Required protections, Fault indications, interlocking are provided
Designs Offered In PCC :
Top / middle / bottom horizontal bus chambers
Panel with Aluminum / Copper bus bars, top / bottom / front / rear cable termination Combinations of APFC part with PCC
Facilities Available :
DG incomer with AMF functions
Cut-Off of non essential feeders at the event of failure of mains power
Panel with provision to connect bus duct at main incomer side
Synchronizing Panel offered by us is designed in compliance with the international standards. The Synchronizing Panels can be easily modified as per the plant expansion plans. The actual sharing, starting, stopping and transfer of load depends on load, and not on voltage & current, due to the KW load based programming of the Synchronizing Panel. Reduces Efforts Required For :
Verified
Add Review
Kalyan, Mumbai, Maharashtra