FRP or fiber-reinforced polymer is a UV resistant sturdy material. FRP pot/ FRP planter is light weight, unbreakable and weather resistant to both extreme temperatures and rainfall. It does not deteriorate over time. 
Each pot is made as per the design requirements. Sizes, shapes and finishes are customized to give a unique look for each client.  Fibre-reinforced plastic is a composite material made of a polymer matrix reinforced with fibres. The fibres are normally glass, carbon or basalt. Each fibre brings in it characteristics based on the intended use of the final FRP planter. FRPs are commonly used in the aerospace, automotive, marine, and construction industries. They are commonly found in ballistic armor as well.

THE PROCESS OF MAKING FRP PLANTERS:

• Firstly based on the desired shape and wooden mould is made. The mould can be of hand- made FRP itself as well
• Each mould has a life of about 30 to 40 usage cycles after which a new mould is created to ensure good quality and finish
• Moulds made from the right technique and experience are vital to achieve a good quality end FRP planter
• The process is that of addition polymerization where in a composite plastic is made to enhance the strength and elasticity of plastics
• The two main ingredient are fibers and the matrix
• The fibre enhances the strength of the plastic, while, the matrix is the original plastic material
• With the right combination of fibre and matrix, right orientation and apt quality of the raw materials, desired combination is applied over the moulds.
• Mixture is then left to cool off and harden. Heat released during the cooling off process can weaken the strength of the FRP pot if not done correctly. During this process the de- moulding has to be done with the right technique ensuring the FRP planter does not – budge, deform or crack.
• Once de-moulded, the FRP planter needs to be polished and painted to achieve the desired finished look. Taking time, using the right tools, varnishes, paints and polishing – an impeccable hand-crafted FRP pot is made ready

FRP or fiber-reinforced polymer is a UV resistant sturdy material. FRP pot/ FRP planter is light weight, unbreakable and weather resistant to both extreme temperatures and rainfall. It does not deteriorate over time. 
Each pot is made as per the design requirements. Sizes, shapes and finishes are customized to give a unique look for each client.  Fibre-reinforced plastic is a composite material made of a polymer matrix reinforced with fibres. The fibres are normally glass, carbon or basalt. Each fibre brings in it characteristics based on the intended use of the final FRP planter. FRPs are commonly used in the aerospace, automotive, marine, and construction industries. They are commonly found in ballistic armor as well.

THE PROCESS OF MAKING FRP PLANTERS:

• Firstly based on the desired shape and wooden mould is made. The mould can be of hand- made FRP itself as well
• Each mould has a life of about 30 to 40 usage cycles after which a new mould is created to ensure good quality and finish
• Moulds made from the right technique and experience are vital to achieve a good quality end FRP planter
• The process is that of addition polymerization where in a composite plastic is made to enhance the strength and elasticity of plastics
• The two main ingredient are fibers and the matrix
• The fibre enhances the strength of the plastic, while, the matrix is the original plastic material
• With the right combination of fibre and matrix, right orientation and apt quality of the raw materials, desired combination is applied over the moulds.
• Mixture is then left to cool off and harden. Heat released during the cooling off process can weaken the strength of the FRP pot if not done correctly. During this process the de- moulding has to be done with the right technique ensuring the FRP planter does not – budge, deform or crack.
• Once de-moulded, the FRP planter needs to be polished and painted to achieve the desired finished look. Taking time, using the right tools, varnishes, paints and polishing – an impeccable hand-crafted FRP pot is made ready

FRP or fiber-reinforced polymer is a UV resistant sturdy material. FRP pot/ FRP planter is light weight, unbreakable and weather resistant to both extreme temperatures and rainfall. It does not deteriorate over time. 
Each pot is made as per the design requirements. Sizes, shapes and finishes are customized to give a unique look for each client.  Fibre-reinforced plastic is a composite material made of a polymer matrix reinforced with fibres. The fibres are normally glass, carbon or basalt. Each fibre brings in it characteristics based on the intended use of the final FRP planter. FRPs are commonly used in the aerospace, automotive, marine, and construction industries. They are commonly found in ballistic armor as well.

THE PROCESS OF MAKING FRP PLANTERS:

• Firstly based on the desired shape and wooden mould is made. The mould can be of hand- made FRP itself as well
• Each mould has a life of about 30 to 40 usage cycles after which a new mould is created to ensure good quality and finish
• Moulds made from the right technique and experience are vital to achieve a good quality end FRP planter
• The process is that of addition polymerization where in a composite plastic is made to enhance the strength and elasticity of plastics
• The two main ingredient are fibers and the matrix
• The fibre enhances the strength of the plastic, while, the matrix is the original plastic material
• With the right combination of fibre and matrix, right orientation and apt quality of the raw materials, desired combination is applied over the moulds.
• Mixture is then left to cool off and harden. Heat released during the cooling off process can weaken the strength of the FRP pot if not done correctly. During this process the de- moulding has to be done with the right technique ensuring the FRP planter does not – budge, deform or crack.
• Once de-moulded, the FRP planter needs to be polished and painted to achieve the desired finished look. Taking time, using the right tools, varnishes, paints and polishing – an impeccable hand-crafted FRP pot is made ready

FRP or fiber-reinforced polymer is a UV resistant sturdy material. FRP pot/ FRP planter is light weight, unbreakable and weather resistant to both extreme temperatures and rainfall. It does not deteriorate over time. 
Each pot is made as per the design requirements. Sizes, shapes and finishes are customized to give a unique look for each client.  Fibre-reinforced plastic is a composite material made of a polymer matrix reinforced with fibres. The fibres are normally glass, carbon or basalt. Each fibre brings in it characteristics based on the intended use of the final FRP planter. FRPs are commonly used in the aerospace, automotive, marine, and construction industries. They are commonly found in ballistic armor as well.

THE PROCESS OF MAKING FRP PLANTERS:

• Firstly based on the desired shape and wooden mould is made. The mould can be of hand- made FRP itself as well
• Each mould has a life of about 30 to 40 usage cycles after which a new mould is created to ensure good quality and finish
• Moulds made from the right technique and experience are vital to achieve a good quality end FRP planter
• The process is that of addition polymerization where in a composite plastic is made to enhance the strength and elasticity of plastics
• The two main ingredient are fibers and the matrix
• The fibre enhances the strength of the plastic, while, the matrix is the original plastic material
• With the right combination of fibre and matrix, right orientation and apt quality of the raw materials, desired combination is applied over the moulds.
• Mixture is then left to cool off and harden. Heat released during the cooling off process can weaken the strength of the FRP pot if not done correctly. During this process the de- moulding has to be done with the right technique ensuring the FRP planter does not – budge, deform or crack.
• Once de-moulded, the FRP planter needs to be polished and painted to achieve the desired finished look. Taking time, using the right tools, varnishes, paints and polishing – an impeccable hand-crafted FRP pot is made ready

FRP or fiber-reinforced polymer is a UV resistant sturdy material. FRP pot/ FRP planter is light weight, unbreakable and weather resistant to both extreme temperatures and rainfall. It does not deteriorate over time. 
Each pot is made as per the design requirements. Sizes, shapes and finishes are customized to give a unique look for each client.  Fibre-reinforced plastic is a composite material made of a polymer matrix reinforced with fibres. The fibres are normally glass, carbon or basalt. Each fibre brings in it characteristics based on the intended use of the final FRP planter. FRPs are commonly used in the aerospace, automotive, marine, and construction industries. They are commonly found in ballistic armor as well.

THE PROCESS OF MAKING FRP PLANTERS:

• Firstly based on the desired shape and wooden mould is made. The mould can be of hand- made FRP itself as well
• Each mould has a life of about 30 to 40 usage cycles after which a new mould is created to ensure good quality and finish
• Moulds made from the right technique and experience are vital to achieve a good quality end FRP planter
• The process is that of addition polymerization where in a composite plastic is made to enhance the strength and elasticity of plastics
• The two main ingredient are fibers and the matrix
• The fibre enhances the strength of the plastic, while, the matrix is the original plastic material
• With the right combination of fibre and matrix, right orientation and apt quality of the raw materials, desired combination is applied over the moulds.
• Mixture is then left to cool off and harden. Heat released during the cooling off process can weaken the strength of the FRP pot if not done correctly. During this process the de- moulding has to be done with the right technique ensuring the FRP planter does not – budge, deform or crack.
• Once de-moulded, the FRP planter needs to be polished and painted to achieve the desired finished look. Taking time, using the right tools, varnishes, paints and polishing – an impeccable hand-crafted FRP pot is made ready

FRP or fiber-reinforced polymer is a UV resistant sturdy material. FRP pot/ FRP planter is light weight, unbreakable and weather resistant to both extreme temperatures and rainfall. It does not deteriorate over time. 
Each pot is made as per the design requirements. Sizes, shapes and finishes are customized to give a unique look for each client.  Fibre-reinforced plastic is a composite material made of a polymer matrix reinforced with fibres. The fibres are normally glass, carbon or basalt. Each fibre brings in it characteristics based on the intended use of the final FRP planter. FRPs are commonly used in the aerospace, automotive, marine, and construction industries. They are commonly found in ballistic armor as well.

THE PROCESS OF MAKING FRP PLANTERS:

• Firstly based on the desired shape and wooden mould is made. The mould can be of hand- made FRP itself as well
• Each mould has a life of about 30 to 40 usage cycles after which a new mould is created to ensure good quality and finish
• Moulds made from the right technique and experience are vital to achieve a good quality end FRP planter
• The process is that of addition polymerization where in a composite plastic is made to enhance the strength and elasticity of plastics
• The two main ingredient are fibers and the matrix
• The fibre enhances the strength of the plastic, while, the matrix is the original plastic material
• With the right combination of fibre and matrix, right orientation and apt quality of the raw materials, desired combination is applied over the moulds.
• Mixture is then left to cool off and harden. Heat released during the cooling off process can weaken the strength of the FRP pot if not done correctly. During this process the de- moulding has to be done with the right technique ensuring the FRP planter does not – budge, deform or crack.
• Once de-moulded, the FRP planter needs to be polished and painted to achieve the desired finished look. Taking time, using the right tools, varnishes, paints and polishing – an impeccable hand-crafted FRP pot is made ready