Completion Oil Tools Pvt. Ltd.

Khushkhera, Alwar, Rajasthan

The Hydraulic Packer is an industry standard, fully hydrostatic, hydraulic set and Straight pull shear release, single string retrievable packer. It can be used in the following applications:Production, Injection, and Zonal Isolation.

Operational Benefit:

• Single String Packer
• Adjustable Straight Pull Shear Release & optional Rotational release
• No mandrel movement during setting
• Field adjustable shear screw.

This is a mechanical set double grip retrievable production packer for medium to high Pressure applications. This Packer is a retrievable, double- grip compression or tension set production packer that can be left in tension, compression, or in a neutral position, and will hold pressure from above or below.

The Wire Line Set Drillable Packer is Permanent Production Packer is a high-performance permanent production packer. It is frequently used as a high-performance squeeze or as a permanent or temporary bridge plug.

Cement Retainer is a high performance drillable cement retainer auitable for most remedial cementing applications. This is made to work as a drillable squeeze packer which, after cementing, acts as a plug trapping squeeze pressure on the cement below the retainer and isolating the newly cemented area from the hydrostatic pressures above the cement retainer.

S Pulling Tool is a wire line service tool designed to remove retrievable subsurface devices with external fishing necks from a well. PTS is also useful as a running tool for collar stops, pack-off anchor stops, and other subsurface devices landed against a positive no-go.

Advantages:

• A set of three dogs to engage the fishing neck.
• It allows extensive upward jarring to pull a bottom hole control.

LOCK MANDREL is a device capable of holding pressure differentials from above or below when set at any depth in a corresponding Landing Nipple Profile of matching size & type.

Features & Benefits:

• Faster slickline service because of the retractable keys
• Operator control of locating, landing, and locking in the selected nipple
• Any number of the identical nipples can be run with selective nipples
• Smooth installation
• Reduces time in the well with slickline
• Seals on the locking mandrel protected from damage
• Running/pulling with no interference
• Keys provide positive location in nipple

Blanking Plug is a device capable of holding pressure differentials from above or below when set at any depth in a corresponding Landing Nipple Profile of matching size & type.

Features & Benefits:

• Faster slickline service because of the retractable keys
• Operator control of locating, landing, and locking in the selected nipple
• Any number of the identical nipples can be run with selective nipples
• Smooth installation
• Seals on the locking mandrel protected from damage
• Running/pulling with no interference
• Keys provide positive location in nipple

RBS eliminates the extreme impact of shearing out a ball seat at the bottom of the liner which could possibly breakdown sensitive formations.

Features:

• Full-bore clearance after ball seat shears
• High-inclination wells
• Design that ensures that the ball is dislodged as the ball seat shears.
• Design that ensures that the ball seat is completely tripped and retained in full-bore open position
• Variable shear-pressure settings for liner systems consisting of numerous hydraulic actuating parts

TBN provides protect a weak casing string from shut-in or excessive production pressure, or to isolate a leaking liner top. Atypical tieback liner system ofCompletion Oil Toolsincludes a Tieback Seal Nipple (CT-TBN), Orifice Float Collar (CT-OFC) and an existing Liner Polished Bore Receptacle (CT-PBR). The CT-TBN consists of a locator, seal mandrel, seals or seal units and a half mule shoe bottom. This assembly is made up to the tieback string and is landed into the existing CT-PBR.

Tieback Seal Nipple provide a new casing string to cover intermediate casing worn by drilling or corrosion.TBN provides protect a weak casing string from shut-in or excessive production pressure, or to isolate a leaking liner top. Atypical tieback liner system ofCompletion Oil Toolsincludes a Tieback Seal Nipple (CT-TBN), Orifice Float Collar (CT-OFC) and an existing Liner Polished Bore Receptacle (CT-PBR). The CT-TBN consists of a locator, seal mandrel, seals or seal units and a half mule shoe bottom. This assembly is made up to the tieback string and is landed into the existing CT-PBR.

X and R landing nipples are run into the well on the completion tubing to provide a specific landing location for the subsurface flow control equipment. The common internal profiles of these landing nipples make them universal.

COMPLETION OIL TOOLS X and XN landing nipples are designed for use with standard weight tubing. R and RN landing nipples are designed for use with heavy weight tubing. (The N designates no-go nipples).

The Wire Line Set Drillable Packer is Permanent Production Packer is a high performance permanent production packer. It is frequently used as a high-performance squeeze or as a permanent or temporary bridge plug.

During development time, this packer was originally designed with bidirectional slips where we faced problem of cone collapsing due to focal point loading effecting performance of the packer while testing. Overcoming this our engineers successfully designed the current model by introducing barrel slips.

The feed thru packer is required in applications of monitoring, gas venting, chemical injection in various slim-hole projects, standard and deviated wells.

These Packers incorporate maximum strength, uniformity of setting pressure, standardization of materials and a one-piece body.

Feature & Benefit:

• Slim-lined solid construction design
• Two opposed sets of full-circle slips
• Suitable for hydro-fracturing application

Operational Benefit:

• Expandable metal gives support to rubber which increases the reliability and can easily sustain high pressure.
• Its slip Provides high loading capacity and transferring of load in a radial manner on to casing.
• Single trip setting (HSSDP)

Hydraulic Set Double Bore Drillable Packers are hydraulically set versions of the CT-WDP Packer. CT-HDDP Model has an enlarged upper seal bore, which allows the maximum possible bore through the seal accessory which is latched into the packer.

These Packers incorporate maximum strength, uniformity of setting pressure, standardization of materials and a one piece body.

The range of bore sizes offered is such that accessories which are used for CT-WDDP series of Packers may be used with the CT-HDDP Packers.

The Large Bore Packers are available in sizes which enables them to use the range of accessories which is available for drillable series of Packers. They have a lower pressure rating because of the large bore size. The hydraulic setting mechanism makes Packers particularly suitable for use in highly deviated wells.

Features & Benefits:

• Solid, slim lined construction and a packing element system which resists swab-off. This permits a fast run-in (when compared with earlier models of permanent packers) without fear of impact damage or premature setting, yet packs off securely and permanently when the packer is set.
• Two opposed sets of full circle; full strength slips ensure that the packer will stay where it is set.
• Interlocked expandable metal back-up rings contact the casing and create a positive barrier to packing element extrusion.
• Setting requires no rotation or reciprocation, thereby eliminating the problems of spacing out, landing etc.
• The WC-HSDDP Packer is run with Anchor Seal Nipples or WC-STNE-1 Setting Tool Nipple.
• All O-Rings which separate casing and annulus pressures are supported by back-up rings to improve long term seal integrity.
• All Packers are designed to withstandpressure differentials up to10, 000 psi.
• Guide furnished as standard, allowing the attachment of a mill out extension or other equipment below the packer.
• All alloy materials within the packer are suitable for H2S service.
• Can be furnished with Kalrez O-Rings for severely corrosive environments.
• Body & Guide (components in flow paths) can be furnished in customers choice of material.
• Fluid displacement is possible after well is flanged up and prior to setting the packer.
• Setting sequence of packer may be controlled to start at 1, 500 psi.

mechanical liner can be set with either right or left- hand rotation, depending on the type of setting tool or design. Staggered cone provides maximum bypass area which results in ease of running in and circulation. Automatic j-cage permits hanger to return to the run-in position, should the hanger set prematurely while running in the well. The slip cage has a j slot and high strength drag springs to manage the movement of the slips with the cones. Mechanical set liner hanger are set through manipulation of the work string (pick-up & 1/4 right hand turn) line up the cones and the slips, and a further slack off sets the slips onto the casing wall. In liner hanger we have four types e.g.: double cone & non rotational, single cone & non rotational, to suit various applications.

the hanger body is furnished with higher group of api 5ct standard materials along with the end connections in compliance to api standards or any premium threads as per the customers requirement

note:materials suitable for h2s or co2 service are available on request.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.