Our Products
Insulators
2 Products availableFuses, Circuit Breakers & Components
2 Products availableHigh Voltage Fuse
2 Products availableNuts Bolts And Fasteners
2 Products availableWires
1 Products availablePole Line Hardware
1 Products availableClamps
1 Products availableOur Complete range of products are Compaq's Cold Shrinkable Straight Through Joint upto 36kv (7.2kv to 36kv), Ccsj/cssjs - Series 11/22/33 Kv Cable Joint, Cold Shrink Outdoor Terminations upto 36 Kv (7.2 Kv to 36 Kv) and Heat Shinkable Terminations.
Compaq Screened Separable Connectors or we can say Touch proof terminations are designed to connect single and three core polymeric cables to medium voltage switchgear, RMU and other equipment using bushings type "C" specified for 250A, 400A, and 630A up to 24kV. Separable Connectors are made of a highly modified EPDM rubber and protected by a touch proof outer conductive screen connected to earth. Supporting a wide application range of Touch proof terminations, the design incorporates one body and stress cone adapters to cover all cross section from 25 - 400 sq.mm.
Salient Features
Voltage Class | 12kV | 17.5kV | 24kV | 36kV |
---|---|---|---|---|
Voltage Rating U0/U (Um) kV | 6.35/11 (12) | 8.7/15 (17.5) | 12.7/22 (24) | 19/33 (36) |
AC Voltage Withstand , 1 min (kV) | 25.5 | 35 | 51 | 76 |
AC Voltage Withstand , 5 min (kV) | 28.5 | 39 | 57 | 85.5 |
DC Voltage Withstand , 15min (kV) | 38 | 52 | 76 | 114 |
Partial Discharge at 2U0 (pC) | <10 | <10 | <10 | <10 |
Basic Impulse Level (BIL) kV | 95 | 95 | 125 | 194 |
Composite Silicone Insulators produced by Compaq, yield appreciable performance even in harsh working conditions. A pultruded fiber glass rod is used as the housing over this insulator. The ends of this glass rod are secured by aluminum fittings or galvanized steel. Silicone or Ethylene Vinyl Acetate (EVA) can also be provided as the housing materials depending upon the requirements of the clients.
The insulators designed by the Compaq International comprise of Polymer disc insulator, Pin type composite insulators, Polymer Strain Insulators, suspension long rod silicone rubber insulator, cross arm silicone rubber insulators, station post polymer insulators and etc.
Salient FeaturesCompaq Polymer Surge Arrestors are manufactured to offer optimum protection to distribution equipment such as transformers and similar assets against the damaging lightning effects and similar operational conditions. These arrestors perform their task with high-end improvement and fidelity towards surge switching and medium voltage networks. Maintenance of service safety for both underground and overheard setups is offered without any trouble on exposure in the outdoors for long durations. Going through precision tests have made Compaq arrestors more durable & reliable.
Salient FeaturesCompaq maintains the highest level of IEC standards in their diversified selection of polymerized Insulators Drop/Cut Out fuses. Raw material of the highest quality is used by us for fuse unit manufacturing. silicone rubber is used for designing Compaq fuse cutouts as these insulators are able to withstand extreme cold, stressful environments, and heat present in heavily polluted locations or sea coasts. These fuses help stopping faults and are highly useful as secondary backup units for protecting the system. Our Drop out expulsion type cut out fuses are well-suited for distribution systems from 11-33 kV and also for protecting transformer Centre Tap lines and H.T. lines
Salient Features
POLYMER DROP/CUT OUT FUSES CHARACTERISTICSUP TO 36KV: | |||
---|---|---|---|
Specifications | Technical Values | ||
Rated Voltage | 12KV | 24KV | 36KV |
Rated continuous Current | 100 Amps. | 100 Amps. | 100 Amps. |
Maximum normal current of fuse base | 200 Amps. | 200 Amps. | 200 Amps. |
Maximum normal current of fuse holder | 100 Amps. | 100 Amps. | 100 Amps. |
Partial Discharge at 2U0 (pC) | <10 | <10 | <10 |
Rated frequency | 50Hz | 50Hz | 50Hz |
TLightning impulse withstand voltage | |||
A. Across the isolating distance of fuse base | 32KV | 60KV | 80KV |
B. To earth and between poles | 28KV | 50KV | 70KV |
Mounting angle to vertical axis | 20° | 20° | 20° |
Colour | Grey/Red | Grey/Red | Grey/Red |
Rated breaking capacity | 8KA | 8KA | 8KA |
Insulator Housing material | Silicon | Silicon | Silicon |