Shell Casting in Coimbatore

• Minimum Thicknesses : As low as 1.5mm (0.062 in) to 6.25mm (0.25 in)depending on the material
• Size Limits : : 30 g to 12 kg (1 oz to 25lb)

The metal pattern is first heated at a temperature of 200 0 C 392 0 F.Then covered with a mixture of sand and thermo set plastic. It forms a skin of sand plastic mixture of about 3.5 mm (0.125 inch) which adheres to the pattern. The shell mold is formed after the skin gets removed from the pattern. The two ha more...

The metal pattern is first heated at a temperature of 200  0  C / 392  0  F.Then covered with a mixture of sand and thermo set plastic. It forms a skin of sand/ plastic mixture of about 3.5 mm (0.125 inch) which adheres to the pattern. The shell mold is formed after the skin gets removed from the pattern. more...

Resm Coated sands are the one which makes the mould to release the gas freely from the mould while the molten metals are poured In India we are associated with large number of concerns who support us and gives priority to us. The sands are ordered as per the casting requirement given by our valuable clients f more...

We do have associate with shell making industries in southern region who deserves to make quality shell and cones. We prepare sand as per the ratio to action the shell mould cakes. Quality shells are obtained by the use of graded sand with the mixture of exact ratio. Shell mould sand are pre-heated and heated more...

We prepare sand as per the ratio to action the shell mould cakes. Quality shells are obtained by the use of graded sand with the mixture of exact ratio. Shell mould sand are pre-heated and heated to the appropriate temperature to obtain the flawless castings. Silicon ore are used for taking shell core. We off more...