Dynamically Balanced Rotor with Shaft and Impellers TEFC, Capacitor Start and Run Motor Built in Thermal Overload Protector (TOP) to protect the motor from burning Double Shield Ball bearing with life long lubrication Sturdy motor design to withstand wide voltage For various fielmore...
Dynamically Balanced Rotor with Shaft and Impellers TEFC, Capacitor Start and Run Motor Built in Thermal Overload Protector (TOP) to protect the motor from burning Double Shield Ball bearing with life long lubrication Sturdy motor design to withstand wide voltage For various fielmore...
Salient Features Dynamically Balanced Rotor with Shaft and Impellers TEFC, Capacitor Start and Run Motor Built in Thermal Overload Protector (TOP) to protect the motor from burning Double Shield Ball bearing with life long lubrication Sturdy motor design to withstand wide voltagemore...
CENTRIFUGAL MONOBLOC PUMPS (SINGLE PHASE TWO & THREE PHASE*) APPROXIMATE PERFORMANCE AT 2880 RPM, 240 VOLTS, SINGLE PHASE, 50 HZ OPERATION. Slow Speed High Speed Pumps, High Grade Cast Iron Body, Cast Iron Impellers, Single Phase Three phase. more...
CENTRIFUGAL MONOBLOC PUMPS (SINGLE PHASE TWO & THREE PHASE*) APPROXIMATE PERFORMANCE AT 2880 RPM, 240 VOLTS, SINGLE PHASE, 50 HZ OPERATION. Slow Speed High Speed Pumps, High Grade Cast Iron Body, Cast Iron Impellers. more...
Owing to the huge demands of customers, we are involved in manufacturing and supplying Centrifugal Monobloc pumps. Technologically advanced machines and high quality components are used in manufacturing these products. These pumps are used in various applications like irrigation,more...
Sealing : Mechanical seal/oil seal with Asbestos Rope
Type : • Single Phase 240r/50HZ/2880rpm S1/ASR with Thermal Overload Protector/class ‘B’ insulation.
• Three Phase 415v/50HZ/2880rpm/1440 rpm S1/Star & Polta/class A insulation.
Maximum operating Pressure : 3.5kg/cm2(35 mtrs total head)Single Phase
55kg/cm2(55 mtrs total head)Three Phase
Maximum Ambient Temp : 43°C
Max Flow Rate : 24 m3/hr(6.6 l/sec)Single Phase
240m3/hr(66l/sec)Three Phase
Improved efficiency and minimal maintenance by
having the set operated on a common shaft. : Rigorous quality control testing at every stage of
manufacturing ensures higher efficiency.
Easy handling with an eye bolt. : Aluminium pressure die-cast rotors press-fitted onto
precision machined motor shafts.
Easy installation and low operating cost. : Deep groove ball bearings packed with right quantity
of special grease ensure long life.
Dynamically balanced rotors and impellers ensure
vibration free performance and enhanced life. : Squirrel cage motor of TEFC type designed to operate
in a wide voltage range180-240 V, 50Hz, AC power
supply.
Motor Capacity : : 0.5HP & 1.0HP (240V, 50 Hz Single Phase AC supply)
Vikram’s Slow speed centrifugal mono block pump sets made out of rigid, close grained cast iron and other high quality raw materials are compact. Efficient and rugged pumps meant for domestic and commercial applicationsmore...
ApplicationUsed for Houses, Gardens, Villas & Small Flats, Industrial and agricultural applications Working Condition Suction lift upto 6 m, Liquid Temperature upto + 40 Degree C, Ambient Temperature upto + 40 Degree C Motor supply Single phase, 220 V, 50 Hz., 2880 RPM, AC capablmore...
Silent Features Body: Aluminum extruded motor body Motor shaft: High Quality alloy steel Insulation: Class ‘B’ Impeller: Cast Iron Impellers Mechanical seal: High quality mechanical seal with Graphite face Speed: Slow Speed / High Speed Pumps Single Phase / Three more...
C.R.I. Centrifugal monoblock pump’s volute chamber and impellers are designed to give the best possible hydraulic efficiency and good suction lift. Sealing is by means of a bellows mechanical seal made of carbon & ceramic is fitted over the shaft , which is ground to close tolemore...
Powerful Motor to withstand wide voltage fluctuations between 180V - 240V & 360V - 415V, Motor Winding fitted with thermal Overload Protector to avoid coil burning due to unrecommended application of the pump.Double Shielded high quality ball bearing lubricated for life to avoid more...
FEATURES OF CENTRIFUGAL MONOBLOCK PUMPS : Powerful Motor to withstand wide voltage fluctuations between 180V - 240V & 360V - 415V Motor Winding fitted with thermal Overload Protector to avoid coil burning due to unrecommended application of the pump. Double Shielded high quality more...
We are engaged in offering Single Phase Centrifugal Monoblock Pumps that are ideally used to fulfill substantial water requirements. Made using superior quality raw material, our Single Phase Centrifugal Monoblock Pumps provides reliable and efficient operations. Attributes Stronmore...
Avail, from us, Single Phase Centrifugal Monoblock Pump . Single Phase Centrifugal Monoblock Pump is innovatively designed by our engineers who have vast industrial experience in the field of manufacturing. We offer customized packaging of Single Phase Centrifugal Monoblock Pump more...
Specification Range of Performance: Flow Rate: Up to 8000 LPH Head Range: 6 mtrs to 25 mtrs Limits Of Suction Suction head lift up to: 6 mtrs Handling: Clear Fresh Water Construction Characteristics: Motor Body: Fe 200 Cast Iron / Extruded Aluminium Pump Body: Fe 200 Cast Iron Immore...
Texmo single phase Monoblocs are compact pumping systems with all the advantages of mounting the prime-mover and pump integrally on the same shaft. Available in both high and slow speed models. The motor is of TEFC squirrel cage type designed to operate in a wide voltage range. more...
Texmo three phase Monoblocs are compact pumping systems with all the advantages of mounting the prime-mover and pump integrally on the same shaft. Available in both high and slow speed models. The motor is of TEFC squirrel cage type designed to operate in a wide voltage range. more...
Taro single phase Monoblocs are compact pumping systems with all the advantages of mounting the prime-mover and pump integrally on the same shaft. Available in both high and slow speed models. The motor is of TEFC squirrel cage type designed to operate in a wide voltage range. more...
Salient Features Dynamically Balanced Rotor with shaft and impellers TEFC , Capacitor Start and run motor Built in thermal overload protector (TOP) to protect the motor from burning Withstand wide voltage Fluctuations Double Shield Ball bearing with life long lubrication Sturdy mmore...
Centrifugal monobloc pumps and impellers are well designed to provide the best possible hydraulic efficiency and suction lift characteristic.these pumps are powered by a totally enclosed fan cooled ac induction motor, suitable for long hours duty.motor stator is made of low watt more...