• Urban water supply
• Industrial water
• HVAC
• In-line pressure boosting

Casing : Cast iron / Stainless steel

Shaft : Stainless steel

Impeller : Stainless steel

Easy replacement in existing systems, Easy to install Sturdy structure, requires minimum space.

Single stage in-line type, driven by a TEFC standard motor, top pull out design for fast and easy maintenance.

• Air suspension treating
• Liquid transfer
• Ozone water preparing

Wet parts is stainless steel 304

• Stable performances
• High efficency
• Low noise
• Simple in struction and operation

• Sewage Pumping, Domestic waste water pumping
• Pumping drainage water from basement and commercial establishment
• Dewatering foundations, trenches and pits
• Convenient for Civil contractors

• Self - Priming coupled pump
• Solid handling capacity upto 50 mm
• Can be used with diesel engines.
• High quality cast iron casing.
• Reliable easy to service.
• Portable product.

• Water supply of boilers & condensate system
• Cooling & air-conditioning system
• Water treatment, reverse osmosis system
• Industrial cleaning system
• Municipal water supply & boosting
• Pressure boosting for high rise buildings

All of the components connection with fluid created from 304 stainless steel and 316 stainless steel in request. The pump head and suction and eliminate can be created of cast iron on request as well.

Our Vertical multi stage centrifugal pump is reliable & service-friendly, Space-saving, suitable for slightly aggressive liquids Energy efficient. Close coupled vertical multistage pump with stainless steel parts which be driven by a standard TEFC motor, discharge and suction in the same line.

Single phase motor up to 2.2kw, Class F and IP55 are standard.

Standard supply for liquid temperature up to 70?, high temperature pump are available on request.

Mechanical seal is Tungsten Carbide/Graphite, other material is available on request

• Air conditioning system
• Cooling system
• Industrial cleaning
• Water treatment (Water purification)
• Fertilizing / metering system
• Environment application

All the parts contact with liquid made of 304 stainless steel, 316 stainless steel on request. The pump head and suction & discharge can be made of cast iron on request too.

Horizontal multi stage pumps has Compact design Low-noise and long service life, Easy to install & operate Energy efficient Horizontal multistage design with stainless steel stamping welding impeller and diffuser, three different type for choice.

Single phase motor up to 2.2kw Class F and IP55 motor is standard.

Standard supply for liquid temperature up to 70?, high temperature pump are available on request.

• Alkali making industry
• Colored metallurgy
• Acid making industry
• Synthetic fibre & plastic industry
• Paper making
• Fertilizer industry
• Pharmacy
• Environmental protection
• Petrolic chemical

F24 or F46, HT200

Simple structure, Non-corrosive MOC, Suitable for wide range of corrosive liquids

SAN-NP Series Pumps have various applications as under:

Dairy Industry : Pumping milk, cream, butter oil.

Beverage industry : Pumping fruit juice, sugar syrup, beer, wine.

Pharmaceutical industry : Pumping formulations.

Steel industry : Pumping demineralised water for furnace cooling.

Chemical industry : Pumping acids, alkalies, cellulose solution, starch solution, yeast, dye.

Sanitary Pumps are specially designed for the following applications :

Milk evaporator plants working under vacuum.

Pumping liquids at high temperature.

Flanged TEFC Motor with stainless steel shaft.

Specially designed impeller for avoiding churning of the liquid being pumped.

Spring loaded mechanical shaft seal.

Seals made out of different materials are available to suit individual requirements.

Free standing with adjustable ball foot or grouting type.

Double mechanical seal arrangement housed in water circulating chamber. Continuously flowing water through this chamber facilitates motor shaft cooling.

• High efficiency and hence, low energy consumption.
• Hygienic/leak proof shaft seal arrangement (Carbon vs SS and Teflon vs SS are available.
• Material of construction being SS-31 6, the pump can be used for many corrosive products.
• Compact design provides easy access to all vital parts.
• Mono block design, hence space requirement is less.
• Hygienic design and suitable for CIP systems.
• Pump can be easily dismantled.
• Low maintenance cost.

In addition to the above features, pumps are provided with water circulating shaft seal chamber. Hence, suitable for vacuum and high temperature application.

• Urban water supply
• Industrial water
• HVAC
• In-line pressure boosting

Casing : Cast iron / Stainless steel

Shaft : Stainless steel

Impeller : Stainless steel

Easy replacement in existing systems, Easy to install Sturdy structure, requires minimum space.

Single stage in-line type, driven by a TEFC standard motor, top pull out design for fast and easy maintenance.

• Air suspension treating
• Liquid transfer
• Ozone water preparing

Wet parts is stainless steel 304

• Stable performances
• High efficency
• Low noise
• Simple in struction and operation

• Sewage Pumping, Domestic waste water pumping
• Pumping drainage water from basement and commercial establishment
• Dewatering foundations, trenches and pits
• Convenient for Civil contractors

• Self - Priming coupled pump
• Solid handling capacity upto 50 mm
• Can be used with diesel engines.
• High quality cast iron casing.
• Reliable easy to service.
• Portable product.

• Water supply of boilers & condensate system
• Cooling & air-conditioning system
• Water treatment, reverse osmosis system
• Industrial cleaning system
• Municipal water supply & boosting
• Pressure boosting for high rise buildings

All of the components connection with fluid created from 304 stainless steel and 316 stainless steel in request. The pump head and suction and eliminate can be created of cast iron on request as well.

Our Vertical multi stage centrifugal pump is reliable & service-friendly, Space-saving, suitable for slightly aggressive liquids Energy efficient. Close coupled vertical multistage pump with stainless steel parts which be driven by a standard TEFC motor, discharge and suction in the same line.

Single phase motor up to 2.2kw, Class F and IP55 are standard.

Standard supply for liquid temperature up to 70?, high temperature pump are available on request.

Mechanical seal is Tungsten Carbide/Graphite, other material is available on request

• Air conditioning system
• Cooling system
• Industrial cleaning
• Water treatment (Water purification)
• Fertilizing / metering system
• Environment application

All the parts contact with liquid made of 304 stainless steel, 316 stainless steel on request. The pump head and suction & discharge can be made of cast iron on request too.

Horizontal multi stage pumps has Compact design Low-noise and long service life, Easy to install & operate Energy efficient Horizontal multistage design with stainless steel stamping welding impeller and diffuser, three different type for choice.

Single phase motor up to 2.2kw Class F and IP55 motor is standard.

Standard supply for liquid temperature up to 70?, high temperature pump are available on request.

• Alkali making industry
• Colored metallurgy
• Acid making industry
• Synthetic fibre & plastic industry
• Paper making
• Fertilizer industry
• Pharmacy
• Environmental protection
• Petrolic chemical

F24 or F46, HT200

Simple structure, Non-corrosive MOC, Suitable for wide range of corrosive liquids

SAN-NP Series Pumps have various applications as under:

Dairy Industry : Pumping milk, cream, butter oil.

Beverage industry : Pumping fruit juice, sugar syrup, beer, wine.

Pharmaceutical industry : Pumping formulations.

Steel industry : Pumping demineralised water for furnace cooling.

Chemical industry : Pumping acids, alkalies, cellulose solution, starch solution, yeast, dye.

Sanitary Pumps are specially designed for the following applications :

Milk evaporator plants working under vacuum.

Pumping liquids at high temperature.

Flanged TEFC Motor with stainless steel shaft.

Specially designed impeller for avoiding churning of the liquid being pumped.

Spring loaded mechanical shaft seal.

Seals made out of different materials are available to suit individual requirements.

Free standing with adjustable ball foot or grouting type.

Double mechanical seal arrangement housed in water circulating chamber. Continuously flowing water through this chamber facilitates motor shaft cooling.

• High efficiency and hence, low energy consumption.
• Hygienic/leak proof shaft seal arrangement (Carbon vs SS and Teflon vs SS are available.
• Material of construction being SS-31 6, the pump can be used for many corrosive products.
• Compact design provides easy access to all vital parts.
• Mono block design, hence space requirement is less.
• Hygienic design and suitable for CIP systems.
• Pump can be easily dismantled.
• Low maintenance cost.

In addition to the above features, pumps are provided with water circulating shaft seal chamber. Hence, suitable for vacuum and high temperature application.