GST : 19AACCC2453J1ZN
Verified
Add Review
Our Products
Brackets
2 Products availableIndustrial Steel Pipes
1 Products availableValves & Valve Fittings
1 Products availableOperation Theater Equipment
1 Products availableMedical Equipment & Supplies
1 Products availableWe are leaders in the market for providing best range of Anaesthetic Rotameters Units With Anti Hypoxia
A single station Selectatec Bar, conforming to international standard, used on the anaesthesia machine. This is vaporiser compatibility suits all selectatec vaporisers The anesthesia vaporizer will be attached on it directly. The input port and output port are horizontal.
A two station Selectatec Bar, conforming to international standard, used on the anaesthesia machine. This is vaporizer compatible. The anesthesia vaporizer will be attached on it directly. Double unit can be put together and to support two interlocking vaporizer. The input port and output port are in back side.
Description:
Anaesthetic Rotameters are used for measuring the rate of flow of gases used for anaesthesia. The gases measured are Oxygen, Nitrous oxide, Carbon dioxide, Xenon, and Air
Anaesthetic Rotameters units with control valve system can be of 1 tube, 2 tubes, 3 tubes and so on as per user requirement. It comes as a complete unit for fitting on the Anaesthesia machine.
Description
Download 01
Download 02
Dimensions In Mm (Approximate)
| Tubes | Height (A) | Width (B) | Depth (C) | Remarks |
|---|---|---|---|---|
| 1-Tube | 280 | 35 | 37 | The standard dimensions are given here. Customised dimensions are also available. The dimensions are without FA valve and inlet/outlet connections. |
| 2-Tubes | 280 | 63 | 37 | |
| 2-Tubes (Cascade) | 300 | 63 | 37 | |
| 3-Tubes | 300 | 105 | 40 | |
| 5-Tubes | 305 | 150 | 45 | |
| 6-Tubes | 305 | 150 | 45 |
The O2 Flush device is suitable for a quick oxygen supply directly at the mixed gases outlet at the end of an anesthesia circuit. Made of anodized aluminum, it is equipped with an anesthetic mixture inlet connection, an oxygen enriched mixture outlet connection, an O2 feeding connection and a supply button. Different constructions can be made on request.
Optimized & Industry-ready Solutions
Flowmeter are used for measuring flow in Anesthesia Machine
Specification:
Standard Flowrange Available For Oxygen
| Model | Scale | Tube Length ± 1 mm | Tube OD ± 0.4mm | Tube ID ± 0.1mm |
|---|---|---|---|---|
| O110 | 0.0-10 l/min | 230 / 250 | 15 | 11.2 |
| O010 | 1.0-10 l/min | 230 / 250 | 15 | 11.2 |
| O115 | 0.1-15 l/min | 230 | 15 | 11.2 |
| O101 | 0.1-1 l/min | 230 / 250 | 10 | 6.3 |
| O105 | 0.1-5 l/min | 230 | 15 | 11.2 |
Standard Flowrange Available For Nitrous Oxide
| Model | Scale | Tube Length ± 1 mm | Tube OD ± 0.4mm | Tube ID ± 0.1mm |
|---|---|---|---|---|
| N212 | 0.2-12 l/min | 230 / 250 | 15 | 11.2 |
| N110 | 0.1-10 l/min | 230 / 250 | 15 | 11.2 |
| N115 | 0.1-15 l/min | 230 | 15 | 11.2 |
| N101 | 0.1-1 l/min | 230 / 250 | 10 | 6.3 |
Standard Flowrange Available For AIR
| Model | Scale | Tube Length ± 1 mm | Tube OD ± 0.4mm | Tube ID ± 0.1mm |
|---|---|---|---|---|
| A212 | 0.2-12 l/min | 230 / 240 | 15 | 11.2 |
| A110 | 0.1-10 l/min | 230 / 240 | 15 | 11.2 |
| A115 | 0.1-15 l/min | 230 | 15 | 11.2 |
| A101 | 0.1-1 l/min | 230 / 240 | 10 | 6.3 |
Details
BPC flowmeters for MIG/MAG, TIG welding BPC (Back pressure compensated) flowmeters for Argon, Argon+CO2 for use in MIG/MAG, TIG welding, available in single scale (Argon), and dual scale (Argon and CO2). This is available in 4-40LPM, 2-25LPM range as standard. Other ranges are available on request. The flow tubes and outer cover are made from Polycarbonate.
The body is made from high quality extruded brass sections. Available in chromium plated or self coloured lacquer finish. BPC flowmeters are available in two different configuration: Inlet opposite to control knob, and inlet at right angle to control knob. The flowmeters are calibrated at 2Kg/cm2 back pressure as per the industry standard. Flowmeters are guaranteed for accuracy and the errors are well within the limits required by ISO 17662. See error boundary curve (VDI/VDE 3513, Sh-2).
The flowmeters are calibrated with international traceability and do not require regular calibration since the accuracy as declared in the “error boundary curves” are guaranteed.
Kasba, Kolkata, West Bengal