Citizen Metalloys Ltd

Usmanpura, Ahmedabad, Gujarat

we manufacture a wide range of pure copper rods with etp and oxygen free (less than 10 ppm) grade with high conductivity. Used for connectors, electric motor components, electroplating, switchgear, ship building and power generating equipment. Offered in three different shapes.

round	square	hexagon

sizes: diameter 3 mm to 120 mm

We are offering laminated flexible connectors our highly flexible copper laminated flexible connectors are manufactured by high conductivity electrolytic grade copper. Its reducing the temperature rise and increasing the current capacity of the connectors. These connectors are used as flexible expansion joints to prevent damages by vibrations of machine or switchgears. Flexible connectors are individually designed and manufactured as per customers requirements and application.

We are offering braided flexible connectors our braided flexible connectors are extremely flexible and individually designed and made as per customers requirement by our specialized compression technology which guarantees extreme compressing and minimal contact resistance. The contact area is made with seamless solder less pressed high conductivity electrolytic grade copper.

We are offering oxygen free(of) copper nuggets citizen introduced special purity copper anodes produced from virgin copper cathode especially for decorative, rotogravure, printed circuitry, electrical ground rod, electroforming and many other functional plating applications. Citizen (of) is a high-purity copper with electrical conductivity of at least 100 % iacs. The maximum oxygen content is 10 ppm (0.001%) and the copper is resistant to hydrogen embrittlement. Manufacture (of) manufacturing starts with high-quality copper cathodes melted under strictly controlled conditions and cast in an inert atmosphere into cakes. During this process the copper is not allowed to come into contact with air. Intermediate or final annealing is done either in a reducing atmosphere or a vacuum. Properties

We are offering bare copper tapehigh conductivity electrolytic bare copper tape are widely applicable for switch, terminals, electrical conductors, etc.

We are offering copper earth plates & copper lattice i. Copper earth plates pure copper plates provide a long lasting earthing solution in places where driving earth rods might be impractical. They are often installed in conjunction with low - resistance earthing compound. Sizes : as per customer requirements.

We are a leading manufacturer of Copper Bus Bars and Copper Flats. Our production range encompasses a wide spectrum of sizes. We offer flat bars with Corner radius, Full Radius and Sharp Edge. As an experience and reliable with fully integrated production, we have long been keeping pace with changes in the market. The latest trends involve additional alloying as well as Oxygen Free Copper - and we're involved in those things too. Use of Copper Flats / Copper Bus Bars :Switchgear construction (low and medium voltage) Power distribution systems (Bus Bars) Transformers/Electrical components Electrical Machine Construction Wind Power Automotives Width: 5 mm to 250 mm Thickness: 1 mm and above Features of CML product: Higher Conductivity for better current carrying capacity Excellent dimensional control for superior contacts Engineered for longer life Customer Specification Solution Crack Free Bends

Our specialized production processes and expertise enables us to manufacture highly copper laminated flexible and copper braided flexible connectors.

i. Laminated Flexible Connectors Our highly flexible copper laminated flexible connectors are manufactured by high conductivity electrolytic grade copper. Its reducing the temperature rise and increasing the current capacity of the connectors. These connectors are used as flexible expansion joints to prevent damages by vibrations of machine or switchgears. Flexible connectors are individually designed and manufactured as per customers requirements and application.

ii. Braided Flexible Connectors The braided flexible connectors are extremely flexible and individually designed and made as per customers requirement by our specialized compression technology which guarantees extreme compressing and minimal contact resistance. The contact area is made with seamless solderless pressed high conductivity electrolytic grade copper.

Apart from all the products we offer a range of products to electroplating industries for quality copper plating, products in various shapes in both grades i.e. Phosphorised & Oxygen free grades. Shapes: Oval, Slabs, Balls, Rods, Nuggets. Manufacturing Process : OF Grade: OF- Copper manufacturing starts with high-quality copper cathodes melted under strictly controlled conditions and cast in an inert atmosphere into Continuous casting rods. During this process the copper is not allowed to come into contact with air. These continuous casting rods are used for further processes. These processes are monitored closely and quality is assured by inspections at all stages.
DHP Grade: DHP- Copper manufacturing starts with high-quality copper cathodes melted with precise % of phosphorous under strictly controlled conditions and cast in an inert atmosphere into Continuous casting rods. During this process the copper is not allowed to come into contact with air. These continuous casting rods are used for further processes. These processes are monitored closely and quality is assured by inspections at all stages.

We offer a wide range of electrolytic grade, pure copper plate with 99.9% purity and high conductivity, which provide a long lasting earthing solution in places where driving earth rods might be impractical. They are often installed in conjunction With low resistance earthing compound. Sizes : As per Customer Requirements.

ii. Copper Lattice Solid Copper Earth Lattice mats with copper rivet offer a more economical cost option to install solid copper plates. This is a preferred option on installations such as telecommunication towers, where touch and step potential could cause problems. Sizes : As per Customer Requirements.

We are highly appreciated for manufacturing and supplying high quality range of Copper washer that are developed using best quality materials procured from our own material. Copper washers are mainly developed to meet the emerging demands of our customers. The washers are known for their effective performance, durability and resistant to corrosion.
Manufactured from pure-hard drawn copper, these square shank nails can be used as a rivet or for face nailing. Mostly used where the level of corrosion high. It gives the product a best grip and a long lasting period.

Sizes : As per Customer Requirements.

Pure Copper tape provides appropriate solution to earthing systems. We offer a range of bare and tinned copper tape with high conductivity, purity and annealed as per BS2874 standard

we are one of the leading manufacturers of copper components in india, which provides a speedy, convenient and economical solution for electrical power, distribution and automation industries. We offer customized components by means of the required drawings or as per samples.

• cutting
• punching
• bending
• plating

• coating
• sleeving
• turning
• tapping

• twisting
• milling
• drilling
• stud fixing

• forging
• forming
• ultrasonic welding
• specialized in cold forming

customer benefits:
reduction in process timereduce inventory costsaving of materialready to use

We are offering solid copper earth rods (internal external threaded) citizen's solid copper earth rods are made in two types; internal and external threaded. Solid copper earth rods are used where the factor of corrosion is very high and exceptionally long life is required. Hence these rods are manufactured from pure and high conductivity hard drawn copper as per bs 2874 c-101.

Pure Solid Copper Earth Rods are the ideal driven earth rod as they offer the installer an economical and efficient earth rod grounding system. We offer different types of earth rods like Air Terminal, Taper pointed with threading. Threads on rods are internal or external threaded.
Size: Diameter 12 mm to 25 mm