Verified
Write a Review
Our Products
Flanges
2 Products availableWashers
2 Products availableGas Pipe Fittings
2 Products availableClamps
2 Products availableValves & Valve Fittings
2 Products availableWe offer the best product range of Nut Twin Ferrule Fitting, Minimess Hose, air quick coupler, MANIFOLD VALES ( 2 way valves manifolds) and MANIFOLD VALES (3 way valves manifolds).
Additional Information:
Payment Terms : L/C, T/T, Western Union,
Packaging Details : As per buyers instructions
Delivery Time : Depend on quantity
We strictly follow the ISI-3175-1974 standards for the hydraulic & pneumatic fitting washers. Copper used for manufacturing confirming to standards IS: 3487-1966. Cold rolled copper heavy toll physical properties. Tensile Strength -200-250- N/mm2 (20 to 25 Kgs + 1 MM2) Elogation-40% min. Specification of copper washers (BSP Standard) as per ISI 3175-1974
we are manufacturer and exportrs of pipe clamp din 3015 type.
1) light duty
2) heavy duty
3) twin series
4) alumnium
Additional Information:
Payment Terms :
Packaging Details : DIPEND ON SZE
Delivery Time : DIPEND ON QUANTITY
We are the main supplier of this product.
The maximum recommended working pressure in indicated for each single article.
Before selecting a part, please take notice of the pressure indications.
All pressure indications are based on a working temperature from 20 Celsius to 90 Celsius. Outside of this temperature range the physical properties of the material used are affected and the maximum recommended working pressure is reduced.
The indicated working pressure refers only of the flanges itself.
For the used pipe, fittings and connections the pressure indications of the specific manufacturer are the determining factors.
Material usedFor every single product group the material used is indicated. If several materials are shown, it is on the estimation of the manufacturer which material is used.
Surface ProtectionIf there is no special instruction on a product range all flanges are delivered in raw steel with protection fluid against rust.
Flange kitsAs required, all flange connections can be supplied with bolt set and O - ring.
The order code is shown on every product group as a simple.
| SAE flanges | metric bolts: | DIN 912-8.8 (ISO 4762 - 8.8) ofDIN 912-10.9 (ISO 4762 - 10.9) of |
| UNC bolts : | ASA B 18.3 | |
| gear pump flanges | metric bolts: | DIN 912-8.8 (ISO 4762 - 8.8) of |
| 4-bolt square flanges | metric bolts : | DIN 931/934 - 8.8(ISO 4014/4017 - 8.8)orDIN 931/934 - 10.9 (ISO 4014/4017 - 10.9)*1 |
| CETOP flange | metric bolts : | DIN 931/934 - 8.8 (ISO 4014/4017-8.8) orDIN 931 -10.9 (ISO 4014/4017-10.9)*1 |
Tubes Design As per DIN 2391 / ISO 3304 part -1 From 6 mm OD To 50 mm ODFrom 1/2" NB TO 6" NB Tube MOC - C.S./ S.S. 304 / S.S.316 / BRASS / MONELBending as per our Technical Manual Heat Treated / Annealed PossibleTest Certificates will be submitted Suitable for welding applications Indian / imported will be the best quality
2 way valve manifolds are mainly used in gauge and static instrument applications such as pressure switches, pressure transmitter and manometers. The manifold will isolate instrumentation from the process and allow venting of instrument for calibration, removal from the circuit without affecting the process / application and or recovery of the sample etc
3 way valve manifolds are mainly used in differential pressure transmitters and static instrument application such as pressure switches, pressure transmitter and manometers. It has two process isolation valve and one equalization valve to equalize the two sides. Process and instrument sides are both on 54 mm centers to correspond with transmitter connection.
NPT & SAE Connections Carbon Steel With Black Oxide Plating Set Screw Allows Knob to be Locked into Position Graduated Knob & Spindle for Accurate Flow ControlBuna O-Ring / PTFE Stem Packing Temperature Range -4 F to + 176F
The standard series Pipe clamps are designed according to DIN 3015 - Part - 1 available in Plastic, Aluminium clamp bodies with Steel / S. S. plates & bolts standard series Pipe - tube clamps are normally used for general Purpose applications & the W.P. range up to 1500 PSI (100 BAR) in the Steel / stainless steel Piping System. Standard series pipe - tube clapms are available along with Multilayer, welding plates, rail nuts, construction types, rubber inley types & many more.
Heavy series Pipe clamps are designed according to DIN 3015 - Part - 2 available in Plastic, Aluminium clamp bodies with Steel / S.S. plates & bolts
Heavy series Pipe - Tube clamps are normally used for general Purpose applications & the W.P. range more then 1500 PSI (100 BAR) and up to 8000 psi (600 BAR) in the Steel / stainless steel Piping System.
Heavy series pipe - tube clamps are available along with Multilayer, welding plates, rail nuts, construction types, rubber inley types & many more.
Twin Series clamps are designed to clamp two indentical Pipe - tube to the Piping Systems. Twin series clamps are available in Sizes from 6 MM od up to 42 MM od. Twin Series clamps are capable to resist W.P. up to 1500psi (100 Bar) in the Piping Systems.
Twin Series clamps are designed with thick plates & heavy bolts to resist High Pressure Piping Application Twin Series clamps are available in Plastic - PP / PA (6) with Steel & stainless steel Plates & bolts.
Twin Series pipe - tube clamps are available along with Multilayer, welding plates, rail nuts, construction types, rubber inley types & many more.
Single Ferrule Fitting is a three piece design consisting of a body portion, a coupling nut and a ferrule. During the assembly the nut is progressively tightened causing hardened ferrule to slide along the inner conical seat of the body and grip the tube. Tightened the nut, ring deforms due to 24 cone of fittings and bites into the steel tube, producing deep cut on the tube. The cut is visible on the outer diameter of the tube. This cut on the tube acts as metallic interlock and makes the joint leak proof at high pressure and under vibration.
| Type | Flare less Bite Type (Single Ferrule) Weld Nipple Type |
| Standard | DIN 2353 / ISO 8434 - 1 |
| Series | LL (Very Light) L (Light) S (Heavy) |
| Size | 4mm to 42mm 1/8"OD to 2"OD 1/8"NB to 2"NB |
| Pressure | Ranging from 100Bar to 630Bar depending on type and size |
| Material | Steel, Stainless Steel, Brass (From extruded bar or forging) |
| Surface Treatment | Steel - Zinc Coated (A3C) or Phosphated, Trivalent Stainless Steel - Electro polished, Nut Silver Plated to avoid galling Brass - Natural |
Twin Ferrule Instrumentation Tube Fittings are designed as leak - free connection for process, power and instrumentation applications. These two ferrule fittings are manufactured to the highest quality standards and are available in a broad range of sizes, materials and configurations.
FeaturesTwin ferrule tube fitting has been specifically designed for use on instumentation, process and control systems, analysers and environmental equipment employed in chemical, petroleum, power generating and pulp and paper plants. Twin Ferrule tube fitting has also found extensive application in other fields where a high quality tube fitting is required.
Adaptor fitting are available in various designs like straight, elbow, tee, swivel & others. Adaptor fittings are widely used for intermidiate to the Hose pipes & installation body Adaptor fittings are available in many sizes & details you can see in our PDF data sheet. Adaptor fittings are designed as per its respective Standards as below:
| THREAD TYPE | STANDARD USED AS | AVAILABLE MOC = MATERIALS |
| BSPP | ISO 228 - 1G | STEEL / STAINLESS STEEL / BRASS |
| BSPT | ISO 7/1, JIS B 0203 | STEEL / STAINLESS STEEL / BRASS |
| NPT | SAE J 476, ANSI B 1.20.3 | STEEL / STAINLESS STEEL / BRASS |
| JIC | STEEL / STAINLESS STEEL / BRASS | |
| UNF | STEEL / STAINLESS STEEL / BRASS | |
| METRIC | DIN 2353 - ISO 8434 1 | STEEL / STAINLESS STEEL / BRASS |
Kirti Mehta (Chirag Industries)
Regd. Office, C/202, Sky High Building, Shankar Lane Extension Orlem Tank Road, Malad WestrnMumbai- 400064, Maharashtra
Share us via
View Contact Number 
