As per requirement: Loose Components ranging in size from 7-1/4" to 13" Clutch Assembly & Automotive applications .

Our List of Clutch Components include

In case you do have Inquiries about any of the above products or say about anything relating to Clutch Components, Please feel free to contact our CEO by filling out the form on the website or through the phone numbers given at the homepage.

Standard Accessories: Six-Station turret with indexing mechanism, Single Vertical Slide & Cross slide without tool holder, Mechanical break for spindle, Quick Collet chucking mechanism without collet.
Extra Accessories: Eight-Station turret in place of Six-Station at extra cost, Chuck with key, Automatic threading attachment, Coolant pump, Bar feed.

The Chera Capstan & Turret lathe is designed for chuck work as well as collet work. In chuck work the maximum dia that can be mounted is 90 mm & in collet work 25 mm. It is ideal for manufacturing simple & complex turned parts from both bars & blanks. The blanks can be pre-turned, forged or cast. The simple design allows quick and easy setting of the machine.The changeover from collet work to chuck work and vice versa is quick and simple as only the spindle nose cap & collet are to be removed and the chuck with the back plate is to be screwed to the nose of the spindle. For change over from chuck work to collet work the procedure is to be reversed.

Standard Accessories: Cross Slide, Tail-Stock with collet mechanism, Bar feed attachment, Electrical equipments with control panel, Motors, Coolant Pump with fittings, Set of change gears, Set of hand tools, Splash Guards, Chip tray, Weights, Pusher rod, Rope for bar feed, Grease gun, Stand.
Standard Accessories:Double Vertical Slide, Long Turning Attachment, Automatic Electric Shutter, Piece Counting Attachment, Single Open Tool Holder (Front or Rear), Double Tool Holder (Front or Rear), Rocker Tool Holder (Front or Rear), Circular Form Tool Holder, Step Turning Tool Holder, Centering & Stopping Attachment, Double Drilling Attachment, Four Station Turret, Protective Cover, CI Body Case, Thread Milling Attachment

CHERA is among a few leading Precision Turned components manufacturers and it caters to a wide range of Original Equipment Manufacturers. We can host to almost all your requirements for precision turned components for any kind of machinery. These components are manufactured as per your requirements. At the time of production the precision is given utmost preference to meet the highest quality standards.

Due to our low downtime we offer competitive prices inspite of the best quality in the industry. By controlling all design, tooling and manufacturing under one roof, production time is shortened and customers' quality expectations are met and extended. We atChera, ensures that every single unit that passes through production should be properly checked for quality which includes busting checks, compression strength test along with technical dimension tests.

Chera manufactures high quality Oil Seal Metal Insert Trimming Machines with auto control where the operator is required to provide & draw out the products so even a fresh worker can operate the machine easily. It consists of two cutters for ID/OD of seal. The machine has got features for easy setting & with precise and accurate dimensions therefore products are upto international standards. The high quality of production ensures the strength of the machine that is why it can be operated for 24 hours continuously.

All the above features ensure that your production costs are lower than ever and Chera provides you all this at a very reasonable price alongwith prompt delivery and excellent after sales services.

As per requirement: Loose Components ranging in size from 7-1/4" to 13" Clutch Assembly & Automotive applications .

Our List of Clutch Components include

In case you do have Inquiries about any of the above products or say about anything relating to Clutch Components, Please feel free to contact our CEO by filling out the form on the website or through the phone numbers given at the homepage.

Standard Accessories: Six-Station turret with indexing mechanism, Single Vertical Slide & Cross slide without tool holder, Mechanical break for spindle, Quick Collet chucking mechanism without collet.
Extra Accessories: Eight-Station turret in place of Six-Station at extra cost, Chuck with key, Automatic threading attachment, Coolant pump, Bar feed.

The Chera Capstan & Turret lathe is designed for chuck work as well as collet work. In chuck work the maximum dia that can be mounted is 90 mm & in collet work 25 mm. It is ideal for manufacturing simple & complex turned parts from both bars & blanks. The blanks can be pre-turned, forged or cast. The simple design allows quick and easy setting of the machine.The changeover from collet work to chuck work and vice versa is quick and simple as only the spindle nose cap & collet are to be removed and the chuck with the back plate is to be screwed to the nose of the spindle. For change over from chuck work to collet work the procedure is to be reversed.

Standard Accessories: Cross Slide, Tail-Stock with collet mechanism, Bar feed attachment, Electrical equipments with control panel, Motors, Coolant Pump with fittings, Set of change gears, Set of hand tools, Splash Guards, Chip tray, Weights, Pusher rod, Rope for bar feed, Grease gun, Stand.
Standard Accessories:Double Vertical Slide, Long Turning Attachment, Automatic Electric Shutter, Piece Counting Attachment, Single Open Tool Holder (Front or Rear), Double Tool Holder (Front or Rear), Rocker Tool Holder (Front or Rear), Circular Form Tool Holder, Step Turning Tool Holder, Centering & Stopping Attachment, Double Drilling Attachment, Four Station Turret, Protective Cover, CI Body Case, Thread Milling Attachment

CHERA is among a few leading Precision Turned components manufacturers and it caters to a wide range of Original Equipment Manufacturers. We can host to almost all your requirements for precision turned components for any kind of machinery. These components are manufactured as per your requirements. At the time of production the precision is given utmost preference to meet the highest quality standards.

Due to our low downtime we offer competitive prices inspite of the best quality in the industry. By controlling all design, tooling and manufacturing under one roof, production time is shortened and customers' quality expectations are met and extended. We atChera, ensures that every single unit that passes through production should be properly checked for quality which includes busting checks, compression strength test along with technical dimension tests.

Chera manufactures high quality Oil Seal Metal Insert Trimming Machines with auto control where the operator is required to provide & draw out the products so even a fresh worker can operate the machine easily. It consists of two cutters for ID/OD of seal. The machine has got features for easy setting & with precise and accurate dimensions therefore products are upto international standards. The high quality of production ensures the strength of the machine that is why it can be operated for 24 hours continuously.

All the above features ensure that your production costs are lower than ever and Chera provides you all this at a very reasonable price alongwith prompt delivery and excellent after sales services.