Hosur, Tamil Nadu, India
GST : 33DMGPS2988A1ZX
Verified
Add Review
Our Products
PPR Pipes and Fittings are Available in stock from 12mm to 90mm. with All Std Fittings available.
Additional Information:
Payment Terms :
Delivery Time : within a week
The genesis of Antichem Equipments can be traced to 2005. when a group of technocrats with years of experience in diverse fields decided to pool their combined talent and create an engineering company that would be a projection of their personality and achieves their goals. Antichem Equipments is the outcome. commenced Reg. Office at Salem, District, Tamil Nadu. we having a factory Facility for Fabrication at Perundurai. providing technical consultancy to diverse industries while commencing the manufacture of a range of evaporators, distillation columns, and dryers. Today we have experienced core staff with numerous contractors and sub-contractors. In a short time, we established ourselves as the leading manufacturer of Evaporator, ATFD, Distillation Column, Heat Exchanger, etc., in TN. Our approach is based on knowledge, concept, design, planning, and execution, especially when it came to specialized Falling Film Forced Evaporator and Thin Film Evaporation technologies. Our competencies covered the entire gamut of Zero Liquid Discharge systems, Multi-Effect Evaporator, and ATFD technologies allowing us to design and deliver solutions to meet client needs. ANTICHEM EQUIPMENTS Leads under superior engineering design capabilities, manufacturing excellence, and a project-based approach for commitment to delivery with high performance for total evaporation solutions customized to clients requirement.
Our Product Range
Stripper systems are used to recovering low boiling solvents from wastewater. By using stripper, COD reduces in MEE Plant condensed water.
ATFD is the ideal apparatus for the continuous processing of concentrated material to dry solids. ATFD is consists of a cylindrical, vertical body with a heating jacket and a rotor inside of the shell which is equipped with rows and pendulum blades all over the length of the dryer. The hinged blades spread the wet feed product in a thin film over the heated wall.
The turbulence increases as the product pass through the clearance before entering calming zone situated behind the blades as the heat will transfer from the jacket to the main shell under the smooth agitation water/solvent will evaporate and liquid will convert to a slurry, to cake or to dry powder or flex
Specification
| Atfd Selection Criteria Area (M2) | Diameter(Mm) | Total Heightr(Mm) |
|---|---|---|
| 3 | 400 | 3800 |
| 5 | 500 | 4750 |
| 10 | 710 | 6300 |
| 15 | 900 | 7700 |
| 20 | 1000 | 8300 |
| 25 | 1150 | 9100 |
| 30 | 1250 | 9700 |
| 40 | 1550 | 10750 |
| 50 | 1700 | 11550 |
These Pumps are designed for handling of most of Several Industrial duties & available in a variety of lining materials to suit different requirements involving highly aggressive media at elevated temperature. the wetted parts of the umps are lined with the following flouropolymers.
These pump having excellent chemical as well as temperature resistance similar to PTFE & cost effective alternatives to expensive metals & alloys Hastelloy , tantalum, nickel etc.,
Special Properties of PVDF
Wetted parts of the pumps are PVDF/FEP/PFA lined. Strong metal WCB / SG IRON Armor provides positive, solid support to polymer lining and anchoring grooves provide reinforcement. Hence these pumps can with¬stand for higher stress at elevated temprature and pres¬sure than split armored / solid molded pump Available in 1440 as well as 2900rpm.
Positive displacement external Rotary Gear Pumps are most efficient and economic range with a verity of materials, which has special features like Simple & Compact design, Low noise level, High in efficiency and Easy to maintain. The Pumps are ideal for handling Oils and Viscous Liquids like all kinds of Fuel Oil, mineral Oils, Lubricating Oil, Fish & Animal Oils, Vegetable Oils, Asphaltants, sugar Syrups, Molasses, Starch, Inks, Paints, Colors, Varnishes Viscous Chemicals etc.,
Also available in the flanged end.
Material Of Construction :
All wetted parts like pumping chamber, pump base, discharge tee, nozzle, wing nut and impeller are made of 55316 investment castings. The outer & inner pipes are seamless types made of 55-316. The shaft is made of SS-316 bright bar. Guide Sleeve and lip seals are made of Teflon.
Material Of Construction :
All wetted parts like pumping chamber, pump base, discharge tee, nozzle, wing nut and Impeller are made of Molded Polypropylene, Outer & Inner pipes are made of Polypropylene, Shaft is made of Hastalloy-B-2 or, SS-316 also available. Guide sleeve and lip seals are made of Teflon & Impeller Also Available in ETFE/PVDF(if required)
Teflon Barrel Pump
Material Of Construction :
All wetted parts like pumping chamber, pump base, discharge tee, nozzle, wing nut, impeller are made of TEFLON, Outer & Inner pipes & Guide sleeve are made of Teflon, Shaft is made of Hastalloy-B2. Impeller is made of ETFE (Moulding grade of Teflon)
Drive : Pumps Available with Pneumatic / Flameproof /Non-Flameproof Motor & also Available with Regulating System.
Operation data :
Details :
