GST : 29AHHPR8177M1ZA
Verified
Write a Review
Our Products
Industrial Gases
2 Products availablePetrochemicals & Petroleum Products
2 Products availableGas Regulators
2 Products availableGas Cylinder Accessories
2 Products availableIndustrial Scrubbers
1 Products availableLeading Manufacturer, Supplier & Retailer of Span Gases for Instrument Calibration, Medical Laser Mixture, PFT Gases, Cal Gas for Blood Gas Analysis and Laser Gas Mixture.
Calibration tests (such as bump checks before each use, field verification, full checks, and factory checks) allow you to verify the accuracy of your detection device. This process involves comparing gases with known concentrations, known as “span gases” or “calibration gases, ” with the results provided by your gas-detecting instrument. Span gases are reference gases, or gas mixtures, that are of a precisely-defined nature or composition. Span gases must also be traceable to national or international standards.
Certification of Span gas are done using reference standard traceable to National/International Standards NPL/NIST
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Span Gases For Instrument Calibration Are Given Below
| CO2 2-12% + O2 5-25% + Nitrogen Balance | CGM03114710 |
| CO2 10% + Nitrogen Balance | CGM02114730 |
Medical Laser Gas Mixtures are produced for carbon dioxide lasers. These lasers are not only more precise and less intrusive, they also provide an efficient method of performing surgeries that are highly sterile or have expectations of significant blood loss. The CO2 laser produce intensive infrared radiation, this can be focused to vaporize tissue smaller than a millimeter. This is done by exciting the molecules in the Medical Laser Gas Mixture, a combination of carbon dioxide, helium, and nitrogen, in a discharge tube which then converts the electrical energy into optical energy.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Medical Laser Mixture Are Given Below
| CO2 4.5-9% + N2 13.5-15% + Helium Balance | CGM03112510 |
| CO2 1-10% + CO 1-10% + N2 1-10% + Helium Balance | CGM04112510 |
Pulmonary Function Gas Mixture is used in testing how well the lungs exchange gases. This is an important part of lung testing, because the major function of the lungs is to allow oxygen to "diffuse" or pass into the blood from the lungs, and to allow carbon dioxide to "diffuse" from the blood into the lungs.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of PFT Gases Are Given Below
| CO 900-1000ppm + O2 21 % + Nitrogen Balance | CGM03124710 |
| CO 0.3% + He 10% + O2 21% + Nitrogen Balance | CGM04124710 |
| CO 0.4% + Ne 0.5% + C2H2 0.5% + O2 21 % + Nitrogen Balance | CGM05124710 |
| CO 1000ppm + CO2 200ppm + O2 21% + Nitrogen Balance | CGM04124720 |
| CO 0.3% + CH4 0.3% + O2 21% + N2 Balance | CGM04364710 |
| CO 0.3% + CH4 0.3% + O2 21% + Ar 1% + Nitrogen Balance | CGM05364710 |
| CO 0.25% + He 18.5% + O2 21% + Nitrogen Balance | CGM04124710 |
Cal Gas is a reference gas or gas mixture used as a comparative standard in the calibration of analytical instruments, like gas analyzers or gas detectors
Laser Gas Mixture that we offer is highly processed using advanced technologies and is suitable for various industrial applications. We make sure that our Laser Gas Mixtures go through a stringent quality-check before delivering to the customers. We provide Laser Gas Mixture at market leading rates.
Laser gas mixture is often used for metal cutting as well as for welding comprising of carbon dioxide (CO2) lasers. Making use of the carbon dioxide gas that is mixed along with helium accompanied by nitrogen to ease the generation of the laser radiation. One may come across different types of gases in the context of laser. Gas lasers using many gases such which prove to be highly efficient for many purposes. Laser gas mixture has the ability to emit hundreds of kilowatts at nominal of 9.6 µm and 10.6 µm, and is often used in industry for task like cutting and welding. It has excellent efficiency which is more than 10%. Any given material or surface is melted by the laser beam and is further flushed out by a nonreactive gas stream. Laser gas mixture can certainly protect the lens from fumes and spatter.
Contact us with your specific needs, we provide all types of combinations
MSDS furnished on request
+91-9945075154
alroysge@gmail.com
Few Examples Of Laser Gas Mixture Are Given Below
| CO2 5% + N2 13% to 55% + Helium Balance | CGM03112510 |
| CO 2-4% + CO 6-8% + Helium Balance | CGM04122510 |
| H2 4% + N2 5% + CO2 15% + Helium Balance | CGM04292510 |
| H2 0.4 + CO 4% + CO2 8% + N2 8% + Helium Balance | CGM05292510 |
| Neon 8.3-20% + Helium Balance | CGM02442510 |
