Chatur Parmanand Vaswani

Fort, Mumbai, Maharashtra

Smoke Detector: - FSP-851

Notifier FSP-851 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel.

FeaturesSleek, low-profile design.Addressable-analog communication.Stable communication technique with noise immunity.Low standby current.Compatible with FlashScan and CLIP protocol systems.Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).Dual LED design provides 360 viewing angle.Visible bi-color LEDs blink green every time the detector is addressed, and illuminate steady red on alarm (FlashScan systems only).Remote test feature from the panel.Walk test with address display (an address on 121 will blinkthe detector LED: 12-[pause]-1(FlashScan systems only).Built-in functional test switch activated by external magnet.

Heat Detector: - FST-851

Notifier FST-851(A) Series intelligent plug-in thermal detectors with integral communication has features that surpass conventional detectors. Point ID capability allows each detector's address to be set with rotary, decimal address switches, pro- viding exact detector locations.

FeaturesSleek, low-profile, stylish design.State-of-the-art thermistor technology for fast response.Rate-of-rise model (FST-851R/A), 15F (8.3C) per minute.Factory preset fixed temperature at 135F (57C); high- temperature model fixed at 190F (88C).Addressable by device.Compatible with FlashScan and CLIP protocol systems.Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).Visible LEDs "blink" every time the unit is addressed.360-field viewing angle of the visual alarm indicators (two bi-color LEDs). LEDs blink green in Normal condition and turn on steady red in Alarm.Integral communications and built-in device-type identification.Remote test feature from the panel.Built-in functional test switch activated by external magnet.Walk test with address display (an address of 121 will blink the detector LED 12-(pause)-1).Low standby current.Backward- compatible.

Laser Smoke Detector: - FSL-751The Notifier FSL-751 VIEW Laser Detector is a revolutionaryadvance in early warning smoke detection technology. Theunique design of this laser detector allows smoke detectionsensitivity that is up to 50 times higher than present photoelectrictechnology, when combined with enhanced intelligentsensing algorithms in the Notifier AFP-300, AFP-400, NFS-640, NFS2-640, NFS-320, NFS-3030 or NFS2-3030 controlpanels. Because of this high sensitivity, the FSL-751 can providevery early warning of slow smoldering fires. Its performanceis comparable to present aspiration technology, at asubstantially lower installed cost.

FeaturesVery Intelligent Early Warning (VIEW) smoke detection.Advanced laser light source and patented optical design.Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).Dual bi-color (red/green) LEDs flash green when Normal and are steady red in Alarm.Dual LED design provides 360 viewing angle.Built-in magnetic test switch, or automatic test commanded from panel.Optional relay, isolator, or sounder bases.

Photoelectric Smoke Detector:- 2351EThe 2351E photoelectric smoke detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which 'acts conventionally, thinks intelligently'.

FeaturesBackward compatible with Series 100 detector range of basesWide operating voltage 8 to 30VDCBi-colour LED detector status indicatorProgrammable sensitivityAddressable featureAdvanced maintenance features via remote hand-held test unit

Multi Criteria Photoelectric Smoke/Thermal Detector:- 2351TEMThe 2351TEM photoelectric smoke/thermal detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With its multitude of innovative features, the Series 300 is a detector which 'acts conventionally, thinks intelligently'.

FeaturesBackward compatible with Series 100 detector range of basesWide operating voltage 8 to 30VBi-colour LED detector status indicatorProgrammable sensitivityAddressable featureAdvanced maintenance features via remote hand-held test unit

Beam Smoke Detector:- BEAM1224 (S)System Sensor Model BEAM1224 is a four-wire conventional reflected beam smoke detector, which is uniquely suited for protecting open areas with high ceilings, where other methods of smoke detection are difficult to install and maintain. An advantage of this single-ended reflective design is that it is much easier to install than the dual-ended projected beam detectors. Alignment is quickly accomplished via an optical sight and a two-digit signal strength meter incorporated into the product.

Features16- to 328-foot protection rangeSingle-ended, reflective designUser-friendly alignment procedureSix user selectable sensitivity levelsRemovable plug-in terminal blocksDigital display for easy alignmentBuilt-in automatic gain control compensates for signal deterioration from dust build-upRemote test station optionPaintable coverEasiest alignment in the industryHeater kits for transmitter/receiver and reflector option