Charmi Machinery Industries Pvt Ltd

Ring Road, Rajkot, Gujarat

We manufacture, export and supply a wide gamut of Semi Automatic Horizontal Plastic Injection Molding Machine. It is offered in different capacities ranging from 18 ton to 80 ton. Semi Automatic Horizontal Plastic Injection Molding Machine comes with a mini plc controller and control panel. Semi Automatic Horizontal Plastic Injection Molding Machine is very efficient and durable.

 

Standard Features :

• Semi automatic controller
• Ac three phase induction motor
• Single van pump
• High chrome platted step less tie bar
• Larger opening stroke mould capacity and tie bar distance to accommodate large moulds
• Steel platen
• Multi stage mould opening and closing speed
• Gas nitride steels screw barrel and cavity
• S.S. Hopper with magnet grill
• Slide mechanism for hopper
• Ceramic heater
• Manually lubrication systems
• Pid temperature controller for heaters
• Screw back pressure control valve
• Water manifold 4 inout
• Hydraulic ejector
• Hydro motor for opening mold thread
• Mcb control switch each heating zone
• Electrical and hydraulic (dump valve) interlock safety gate
• Ampere meter for heater
• Oil cooler ( water cooling type )

Injection Unit :

• Single stage injection speed & pressure
• Gas nitrated hardened screw and barrel
• Single cylinder unit
• Pid temperature control
• Sliding mechanism for hopper
• Screw back pressure control valve

Clamping Unit :

• Case hardened pin & bush
• Multi stage mould opening and closing
• Five point twin toggle locking system
• Graded casting toggle, brackets, links and platen
• Motorized mould height adjustment for quick mould change
• Electrical and hydraulic (dump valve) interlock safety gate
• Optional features
• Hydraulic & pneumatic core pulling device
• Hopper dryer
• Long nozzle with heater
• Oil temperature indicator
• Heater disconnection alarm
• Insulated heaters
• Special purposes screw barrel
• Energy meter

We offer a wide range of Fully Automatic Horizontal Plastic Injection Molding Machine. Fully Automatic Horizontal Plastic Injection Molding Machine comes with a fixed van pump, variable displacement pump, servo system, full PLC controller,  hydro motor, and an ejector. Additionally, Fully Automatic Horizontal Plastic Injection Molding Machine is equipped with auto load hopper and a dryer.

 

Standard Features :

• PLC system ( colour display )
• AC three phase induction motor Servo Motor
• AC drive Servo Drive
• Hydraulic Fixed Van pump Variable Displacement Pump Servo Gear Pump
• High chrome platted step less tie bar
• Larger opening stroke mould capacity and tie bar distance to accommodate large moulds
• Graded casting  toggle, brackets and links with harden pin and bush
• Multi stage injection with speed & pressure
• Multi stage mould opening and closing speed & pressure
• Gas nitride steels screw barrel and cavity
• Part dropping sensor for single part
• Hydraulic & pneumatic core pulling device
• S.S. hopper with magnet grill
• Slide mechanism for hopper
• High efficiency and low power rate ceramic heater
• Centralize lubrication systems
• PID temperature controller for heaters
• Insulated heaters
• Screw back pressure control valve
• Cold start protection
• Air valve
• Water manifold 4 inout
• Hydraulic ejector
• Hydro motor for opening mold thread
• MCB control each heating zone
• Heater disconnection alarm
• Electrical and hydraulic (dump valve) interlock safety gate
• Ampere meter for heater
• Energy meter
• Oil temperature indicator
• Oil cooler ( water cooling type )

Injection Unit :

• Multi stage injection with variable speed & pressure
• Liner transducer to control programmable injection position
• Programmable holding pressure profile
• Programmable multi stage refilling
• Single injection cylinder  unit
• Automatic purging
• Gas nitrated hardened screw and barrel
• Heater disconnection alarm
• Cold start screw prevention
• Pre-suck back function
• PID temperature control
• Sliding mechanism for hopper
• Screw back pressure control valve

Clamping Unit :

• Case hardened pin & bush
• High tensile & hard chrome plated tie rods of larger diameters.
• Fully automatic centralization lubrication unit
• Multi  stage mould opening and closing with variable speed & pressure
• Liner transducer to control programmable clamping system
• Five point toggle locking system
• Graded casting, Platen &  toggle 
• Motorized mould height adjustment for quick mould change
• Linear transducer for control programmable ejector position with variable speed & pressure
• Hydraulic ejector with multiple ejecting, oscillatory ejecting & holding

We are renowned as Manufacturer, Supplier and Exporter of a comprehensive array of Automatic Horizontal Plastic Injection Molding Machine. Automatic Horizontal Plastic Injection Molding Machine comes in varied capacities of 18 ton to 150 ton. Automatic Horizontal Plastic Injection Molding Machine comes with a fixed van pump, plc controller, proportional valve, hydro motor, and ejector.

 

Standard Features :

• Color display plc system
• AC three phase induction motor
• High chrome platted step less tie bar
• Larger opening stroke mould capacity and tie bar distance to accommodate large moulds
• Graded casting toggle, brackets and links with harden pin and bush
• Multi stage injection with speed & pressure
• Multi stage mould opening and closing speed & pressure
• Automatic mould height setting system
• Gas nitride steels screw barrel and cavity
• S.S. Hopper with magnet grill
• Slide mechanism for hopper
• Ceramic heater
• Automatic lubrication systems in toggle tie bar
• Pid temperature controller for heaters
• Screw back pressure control valve
• Cold start protection
• Air valve
• Water manifold 4 inout
• Hydraulic ejector
• Hydro motor for opening mold thread
• Mcb control each heating zone
• Electrical and hydraulic (dump valve) interlock safety gate
• Ampere meter for heater
• Oil cooler ( water cooling type )
• Energy meter

Injection Unit :

• Multi stage injection with variable speed & pressure
• Liner transducer to control programmable injection position
• Programmable holding pressure profile
• Programmable multi stage refilling
• Single injection cylinder  unit
• Gas nitrated hardened screw and barrel
• Heater disconnection alarm
• Cold start protection
• Pre-suck back function
• Pid temperature control
• Sliding mechanism for hopper
• Screw back pressure control valve

Clamping Unit :

• Case hardened pin & bush
• High tensile & hard chrome plated tie rods of larger diameters
• Hand pump lubrication system in toggle & tie bar
• Multi  stage mAutomatic Horizontal Plastic Injection Molding Machine
• Ould opening and closing speed & pressure
• Five point twin toggle locking system
• S.G. Iron casted toggle, brackets, links and platen
• Motorized mould height adjustment for quick mould change
• Hydraulic ejector with multiple ejecting, oscillatory ejecting & holding
• Electrical and hydraulic (dump valve) interlock safety gate

We offer Plastic Injection Moulding Machines.CPVC Ball Valve Injection Molding MachineWe manufacture CPVC ball Valve making Plastic Injection Molding Machine, generally vertical screw type plastic injection molding machine have been used for CPVC different model are available from 100 Gm to 3000 Gm, with Semi Automatic & Fully Automatic, In Horizontal Injection Molding machine, CPVC ball valve machine is available from 50 Ton to 450 Ton depending on the customers requirems,

We offer plastic recycling line. Plastic recycling plant with complete washing line & palletizing line for pp, ld, hd & etc

We offer a qualitative range of Fully Automatic Vertical Plastic Injection Molding Machine. Fully Automatic Vertical Plastic Injection Molding Machine is offered in different capacities ranging from 500gm to 3000gm. Our range of Fully Automatic Vertical Plastic Injection Molding Machine comes with a fixed van pump, AC drive, variable displacement pump, servo system, PLC controller, hydro motor, and ejector.

 

Stander Features :

• Controlled by plc system
• A/C three phase induction motor / Servo Motor
• Hard chrome platted tie bar
• Gas nitride steels screw barrel and cavity
• Hydraulic  vane pump / Variable Displacement Pump / Servo Gear Pump
• Ceramic heater with PID temperature controller
• Cold start protection
• Hydraulic ejector
• Hydro motor for opening mold thread
• Energy meter
• Oil cooler  ( water cooling type )
• Anti vibration pad
• MCB control each heating  zone
• Water manifold 4 in/out
• Ampere meter for each heater

Injection :

• Multi stage injection with variable speed  & pressure
• Double injection cylinder  unit
• Ceramic heater with PID temperature controller
• Gas nitrated hardened screw and barrel  cavity
• Long Screw Barrel For Best Pressure Generate And Melt-Down Of Materiel

Clamp Unit :

• Ram type locking
• Sliding mechanization for mould height
• Multi stage pressure & speed
• Automatic Pressure Cut out
• Check vale for locking pressure

We offer a qualitative range of Semi Automatic Vertical Plastic Injection Molding Machine. It is offered in different capacities ranging from 100gm to 400gm. Semi Automatic Vertical Plastic Injection Molding Machine model comes with a mini PLC Controller and Control Panel. Semi Automatic Vertical Plastic Injection Molding Machine can be purchased at nominal prices.

 

Standard Features :

• Semi automatic controller
• A/C three phase induction motor
• Hard chrome platted tie bar
• Gas nitride steels screw barrel and cavity
• Hydraulic  vane pump
• Ceramic heater
• Cold start protection
• Hydraulic ejector
• Hydro motor for opening mold thread
• Oil cooler  ( water cooling type )
• Anti vibration pad
• MCB control each heating  zone
• Water manifold 4 in/out

Clamp Unit :

• Ram type locking
• Sliding mechanization for mould height
• Single  stage pressure & speed
• Check vale for locking pressure

Injection Unit :

• Single  stage injection  pressure and speed
• Single injection cylinder  unit
• Ceramic heater with PID temperature controller
• Long screw barrel for best pressure generate and melt-down of materiel
• Flow control valve for injection speed
• Colt start protection

Optional parts :

• Magnet grill for S.S. hopper
• Ampere meter for each heater
• Energy meter
• Special purposes screw barrel
• Heater disconnection alarm

We manufacture, export and supply a wide gamut of Plastic Scrap Grinder. It is made by using premium raw material as per the set industry norms. Plastic Scrap Grinder is available in different specifications as per the requirements of the customers. Plastic Scrap Grinder is high in performance and low in maintenance.

Our range of Automatic Vertical Plastic Injection Molding Machine is highly appreciated for providing complete plastic processing solutions. Owing to its high-grade quality and reliability, Automatic Vertical Plastic Injection Molding Machine is widely demanded in the market by customers. Automatic Vertical Plastic Injection Molding Machine has a durable finish, is low in maintenance and high in performance.

we are dealing in plastic injection molding machine manufacturing business, we manufacturer horizontal type injection molding machine & vertical type injection molding machine, we deal in servo injection molding machine also, .