Chandresh Cables Limited

Madhupura, Ahmedabad, Gujarat

we are offering Control Cables.Industrial Copper Control Cables up to 1.1 KV as per IS 1554 (Part I) & IS 7098 (Part I) PVCXLPE InsulationUn-armoured Armoured (Strip or Round wired)FRLS HR TypeCapacity 1.5 & 2.5 sq. mm up to 61 cores

Industrial Power Cables up to 1.1 KV as per IS 1554 (Part I) & IS 7098 (Part I) CopperAluminiumPVCXLPE InsulationUn-armoured Armoured (Strip or Round wired)FRLS HR TypeCapacity - Single Core up to 1000 sq. mm, Multi core up to 400 sq. mm

We are offering Submersible Cables as per IS 694: 1990 Flat cable up to 70 Sq.mm.

We are offering industrial flexible cables as per is 694: 1990 multi core copper cables up to 24 cores with pvc insulation andsheathed round wiressingle core up to 1000 sq. Mm

We are offering house wires.House wires as per is 694: 1990 fr pvc hrpvcfrls insulated up to 10 sq. Mm in all coloursflexiblestranded solid type copper conductor

We are offering submersible cables.Submersible cables as per is 694: 1990 flat cable up to 70 sq.mm.

We are offering industrial flexible cables as per is 694: 1990 multi core copper cables up to 24 cores with pvc insulation andsheathed round wiressingle core up to 1000 sq. Mm

We are offering house wires as per is 694: 1990 fr pvc hrpvcfrls insulated up to 10 sq. Mm in all coloursflexiblestranded solid type copper conductor

XLPE means cross-linked polyethylene or vulcanized polyethylene. The basic material is low density polyethylene. Polyethylene is a thermoplastic material consisting of long chain of hydrocarbon molecules. At elevated temperatures these molecules tend to move relative to one another so that the material becomes increasingly deformable and will eventually melt at the temperature around 110oC.

By means of process similar to the vulcanization of rubber the polyethylene molecules can be cross-linked. The process of cross-linking or vulcanization consists of producing chemical bonds at interval between the long molecular chain to give a ladder effect which prevents slippage between molecules. As a result of cross-linking the material becomes heat resistant and does not soften at higher temperatures. Further it has better resistance to stress cracking and good resistance to ageing in hot air. With the change of structure there is no adverse effect on electrical properties.

dvantages of Avocab XLPE CABLES

• Dielectric losses are very small.
• Higher current carrying capacity.
• Higher short circuit rating 250oC. as against 160oC for PVC.
• Avocab XLPE can retain flexibility down upto 40oC.
• Jointing and Termination is easy.
• Light in weight.
• They are not prone to fatigue damages due to vibrations or loading cycles.
• Has better resistance to most chemicals, oils, acids, etc.
• Can be installed along cable routes without elevation limitations.