Our Products
Powder Mixers
2 Products availableKitchenware And Cookware
1 Products availableLab Instrument
1 Products availableIndustrial Mixers & Homogenizers
1 Products availableDosing System
1 Products availableOur offered Product range includes Roll Compactor Cantilever Model, Roll Compactor GMP Model, FB tech Ci (Lab Model) Fluid Bed Processor, Mini Roll Compactor (Cantilever) with cake Crusher and Granulator and Mini Roll Compactor GMP Model.
MODELS | CPMRC-200/50 C | CPMRC-200/75 C | CPMRC-200/100 C | CPMRC–200/150 C |
Working Cap. (Output) * | 20 – 60 Kg/hr | 30 – 100 Kg/hr | 100 – 250 Kg/hr | 100 –350 Kg/hr |
Roll Size (mm) | Ø 200 X 50 W | Ø 200 X 75 W | Ø 200 X 100 W | Ø 200 X 150 W |
Roll Speed (ACVFD) | 6 to 25 RPM | 6 to 25 RPM | 6 to 22 RPM | 6 to 22 RPM |
Feed Screw Speed (ACVFD) | 10 to 60 RPM | 10 to 60 RPM | 16 to 50 RPM | 16 to 50 RPM |
Roll Force Max. | 12 Tons | 12 Tons | 22 Tons | 22 Tons |
Roll Drive Motor (HP) | 7.5 | 7.5 | 7.5 | 10 |
Feed Screw Drive Motor | 2 | 2 | 3 | 3 |
Electrical Supply ** | 11 HP ,3 Ø ,A.C. | 11 HP ,3 Ø ,A.C. | 12.5 HP ,3 Ø ,A.C. | 15 HP ,3 Ø ,A.C. |
MODELS | CPMRC 200/50 | CPMRC 200/75 | CPMRC 200/100 | CPMRC 200/150 | CPMRC 300/330 |
Max. Output (kg/hr) * | 20 to 60 | 30 to 100 | 100 to 250 | 100 to 350 | 100 to 1000 |
Roll Speed (RPM) | 6 to 25 | 6 to 25 | 6 to 22 | 6 to 22 | 6 to 25 |
Feed Screw Speed | 10 to 60 RPM | 10 to 60 RPM | 16 to 50 RPM | 16 to 50 RPM | 10 to 90 RPM |
Roll Drive Motor | 5 HP | 5 HP | 7.5 HP | 10 HP | 30 HP |
Feed Screw Drive motor | 2 HP | 2 HP | 3 HP | 3 HP | 5 HP |
Electrical Supply ** | 7 HP, 3 Ø, A.C. | 7 HP, 3 Ø, A.C. | 10.5 HP, 3 Ø, A.C. | 13 HP, 3 Ø, A.C. | 28 HP, 3 Ø, A.C. |
** Motor HP will be changed in case of Bottom spraying system
Cantilever type Roll Compactor with cake Crusher & Two Stage Oscillating Granulator
This high end model operates in completely enclosed manner to comply with highest standard of cGMP guidelines by optimum utilization and at minimal operating cost and wastage.
FEATURESCM Mini Roll Compactor is totally based on method of Dry Granulation.
The powder charged in the feed hopper is predensified and fed between two counter rotating rolls.
As the volume decreases through the region of maximum pressure, the material is formed into a solid compacted sheet.
The densified sheets can then be granulated to any desired mesh size with use of CM Granulator or CM Communiting Mill.
CM Mini Roll Compactor is designed to the same principle and mode of operation as that of production size CM Roll Compactor.
Simple, tiny table top unit suitable for straight attachment to the tableting machines spout for de-burring and de-dusting of tablets. The unit consists of inlet, outlet, stainless steel vibratory screens, Poly carbonate cover, vacuum connection nozzles, compressed air connection and magnetic coil housed in stainless steel body.
FEATURES
Cantilever Type Roll Designinline cake crusher & 2 stage granulatorRoll driven through ACVFDHydraulic power pack for roll pressure & feed screw liftingTwin feed screw system for both horizontal & vertical feedingDe-Aeration system in Vertical Feed ScrewWIP provision onlyPLC SystemMechanical Roll loading / unloading arrangement
OPTIONAL FEATURES
Comprehensive Automation includingRoll gap measurement & control21 CFR Part 11 complianceVacuum Powder Transfer System
Closed loop system with structure & surrounding platformmpactor
This central driven double rotary tablet press stands out because of its new aesthetic and ergonomically improved design that is benefited with higher turret speed, powerful pre compression force upto 5 Ton. And main compression force upto 10 Ton.
Reliable and easy to operate Blitz is fitted with Hydro-Pneumatic power pack for overload pressure release system to prevent damage to tooling and numerous alluring features like auto lubrication for centralized lubrication, central driven and easy to access front controls.
Features
MODELS | BLITZ | ||
Tooling | “D” | “B” | “BB” |
No. of Stations | 31 | 37 | 47 |
Max. Output (Tab/hr)* | 223,200 | 266,400 | 338,400 |
Max. Pressure | 10 Ton | 6.5 Ton | 6.5 Ton |
Per-Compression | 5 Ton | 5 Ton | 5 Ton |
Max. Tablet Dia | 25 mm | 16 mm | 11 mm |
Max. Depth Of Fill | 20 mm | 17 mm | 17 mm |
Upper Punch Penetration-Main | 3 to 6 mm | 3 to 6 mm | 3 to 6 mm |
Upper Punch Penetration-Pre | 2 to 5 mm | 2 to 5 mm | 2 to 5 mm |
Main Motor | 5 HP | 5 HP | 5 HP |
Feeder Motor | 0.5 HP | 0.5 HP | 0.5 HP |
Total Power** | 6 HP | 6 HP | 6 HP |
The attachment is suitable for automatic counting and filling of tablets, capsules, coated tablets, pills, as well as lentil, bean or ball shaped objects with a diameter from 5 to 20mm into bottles, tins, etc. Change over from one set of filling parts to another and from one object-shape to another can be done in a few minutes. Tablet and Capsules are counted using filling or counting tracks. Coated tablets and similar objects are counted with a rotating disc. Capacity depends up on the size of the object and number of objects in each container. Tablets and Capsules range between 1000 1500 fills per hour, coated tablets between1500 1800 per hour. The apparatus can be supplied as a combination machine for all types of objects or only for tablets or capsules or coated tablets. For manufacturing counting discs for coated tablets, which can be order at any time, sample of the object and container are required.
All contact parts are made of stainless steel, anodized aluminum alloy or plastic. The counting and filling attachment is designed to be connected on all main drives.
Co Mill is used for Dry and Wet Milling/Size reduction of wide range of products. Its suitable for standalone as well as online milling.
Benefits& HighlightsLow speed design allowing for inherently gentle action on the product resulting in optimum particle granularity, low heat, low noise, minimal fines and consistent, high quality end product can be used on heat sensitive products, high capacities, fully customizable to many different application and process stream
Advantages as compared to other Milling EquipmentCo-Mill SS 316 Contact Parts, GMP Model with 5HP, Mounted on S.S. Movable Stand
Motor:5 HP
Capacity:200 to 250kg per hr (depend upon material & mesh size)
OptionalMulti Mill is widely used for wet and dry granulation, pulverization etc., in Pharmaceuticals, Chemicals, Cosmetics, colors, Dyestuff, Food product etc. it also finds application in Pesticides, Spices, Detergents, Insecticides, Plastic and Resins Industries.