Our Products
Dryers
2 Products availableChemical Machinery & Plant
2 Products availableMetal Detector
2 Products availableKitchen Appliances
2 Products availableLamination, Wrapping & Banding Machines
2 Products availableWe offer the best product range of Rotary Tablet Press, Vibro Sifter, CLIT Sieving Grading, Small Tablet Press and Single Sided Rotary Tablet Press.
Apt operation from laboratory applications to high value small scale production, square shaped rugged designed Lumina aims to deliver lowest cost of ownership by maximizing yield, flexibility, productivity and reliability.
Immaculate Lumina with an exceptional output capacity for a single sided tablet press, is equipped with interchangeable turret facility that allows tool free operation and dramatically reduced product change over. Besides powerful pre and main compression upto to 10 ton, pneumatic system for pressure controls, paint free production zone and many other utilitarian features as mentioned below.
FeaturesMODELS | LUMINA | ||
Tooling | D | B | BB |
No. of Stations | 20 | 25 | 30 |
Max. Output (Tab/hr)* | 72, 000 | 90, 000 | 108, 000 |
Max. Pressure | 10 Ton | 6.5 Ton | 6.5 Ton |
Per-Compression | 10 Ton | 6.5 Ton | 6.5 Ton |
Max. Tablet Dia | 25 mm | 16 mm | 11 mm |
Max. Depth Of Fill | 20 mm | 17 mm | 17 mm |
Upper Punch Penetration-Main | 3 to 6 mm | 3 to 6 mm | 3 to 6 mm |
Main Motor | 5 HP | 5 HP | 5 HP |
Feeder Motor | 0.5 HP | 0.5 HP | 0.5 HP |
Total Power** | 5.5 HP | 5.5 HPP | 5.5 HP |
Compressed Air requirement | 15 CFM at 8 Bar |
Separation of solids from solids, liquids from solids and gradation of materials in accordance with their sizes have always presented problems, especially when large quantity of material is to be processed through finer screens. In recent times the most important development that look place it the replacement of the conventional reciprocating motion by the gyratory motion in sieving and straining operations. Even if a particle is small it would pass through a screen only if its configuration relating to the opening is favorable.
For a non-isometric particle, the axis must be correctly aligned with respect to the place of the screen. And the center of gravity of the particle must be above the aperture at any instant. Further, the amount of material on the screen should be such that passage of small particles is not obstructed by larger particles.
It is therefore necessary to impart horizontal rotary motion to the particle by rotary motion to the particle by suitable means. Care also has to be taken to ensure that such motions, particularly during dry sieving of grading operation, should not be vigorous so as to cause size reduction of particles themselves or damage to the screen.
CLIT Sieving Grading and Straining Machines was specially developed with above design features to provide gyratory vibration. The amplitude of vibration is adjustable to suit processing needs.
MODELS | CPMVS 10 | CPMVS 20 | CPMVS 30 |
Screen Diameter | 248 mm | 510 mm | 750 mm |
Charging Height | 817 mm | 1000 mm | 1150 mm |
Discharge Height | 525 mm | 600 mm | 750 mm |
Electrical Supply** | 0.25 HP, 3 Ø, A.C. | 0.5 HP, 3 Ø, A.C. | 1 HP, 3 Ø, A.C. |
The Single sided rotary tableting machine has been designed to use for tablet making of product ofPharmaceuticals and any other similar process industries.
FEATURES
MODEL | CPMIOTA “ B” & “D” TOOLING |
CPMIOTA “D” TOOLING |
CPMIOTA “B” TOOLIN G |
No. of stations | 4 + 4 = 8 | 8 | 8 |
Tooling | 4B & 4D | “D” | “B” |
Max. Operating Load | 4 Ton | 4 Ton | 4 Ton |
Max. Pre-comp. Load | 1 Ton | 1 Ton | 1 Ton |
Max. Output (Tab/hr) * | 9,600 | 19,200 | 19,200 |
Max. Tablet Dia (mm) | 23 for “D” Tooling16 for “B” Tooling | 23 | 16 |
Depth of fill (mm) | 17 | 17 | 17 |
Upper punch penetration (mm) | 3 to 6 | 3 to 6 | 3 to 6 |
Main electric motor(Driven through ACVFD) | 2HP | 2HP | 2HP |
Feeder electric motor(Driven through ACVFD) | 0.25HP | 0.25HP | 0.25HP |
Electrical supply** | 2.5 HP, 3 Ø, A.C. | 2.5 HP, 3 Ø, A.C. | 2.5 HP, 3 Ø, A.C. |
Chamunda Alpha Ci 7008 is a part of New Chamunda Intelligent Series Machines and is a High Speed Single Rotary Tableting Machine.
The machine is fully automated and is equipped with advance features required for the purpose of quality pharmaceutical production. Built on the principle of latest tablet technology Alpha Ci 7008 is a versatile and is suitable for the medium batch size production.
The machine confirms to all the required regulatory requirements of cGMP Norms/Schedule M Requirements/US FDA Regulations in case of Automated Machines.
The machine can be connected online to devices like Tablet De-dusters and Metal Detectors, it is also provided with the single point connection for the Dust Extraction system.
Available with choice of turret having 30, 37 and 47 stations, corresponding to the various tooling requirements.
FeaturesINTRODUCTION
Chamunda DUO PRESS (Double Rotary) is developed to meet the R & D or production sector in the Tableting zone of the pharmaceutical industry. The aesthetic look and innovative compact design built on the principles of latest tablet technology further supports the consistency of the machine. This machine comes with the variant tooling such as D, B, D + B and D + B + BB to meet the customize requirements.
SALIENT FEATURESAlpha Press is a High Speed Single Rotary Tablet Press with5 Tonsof Pre-compression. ItsModular Designis conceived under stringent cGMP standards with a totally redesigned compression zone, The design isolates the compression zone from the mechanical sections of the machine. The machine is available with a choice of turret having 30, 37 and 47 stations and corresponding tooling to give higher output.
Features
MODELS | CPMD-30 | CPMB-37 | CPMB-47 |
Tooling | “D” | “B” | “BB” |
No. of Stations | 30 | 37 | 47 |
Max. Output (Tab/hr)* | 126,000 | 155,400 | 197,400 |
Max. Pressure (Ton) | 10 | 6.5 | 6.5 |
Pre-Compression (Ton) | 5 | 5 | 5 |
Max. Tablet Dia (mm) | 25 | 16 | 11 |
Max. Depth of Fill (mm) | 20 | 16 | 16 |
Upper punch penetration | 3 to 6mm | 3 to 6mm | 3 to 6mm |
Main Motor | 5 HP, 3 Ø, A.C. | 5 HP, 3 Ø, A.C. | 5 HP, 3 Ø, A.C. |
Electrical supply** | 7 HP, 3 Ø, A.C. | 7 HP, 3 Ø, A.C. | 7 HP, 3 Ø, A.C. |