FEATURES

• Cantilever roll design
• Comply with all cGMP requirements
• Contact parts SS 316 without roll
• Feed Screw and roll speed through ACVF Drive
• Technical and production Area Separate
• Water Jacketed (optional)
• Flame Proof Controls (optional)
• WIP Systems with tank equipped with heating arrangement. (optional)
• Vertical & Horizontal Feed Screw with De aeration system to avoid air trapping (optional)
• PLC with touch screen (optional)
• PLC with touch screen (with Automation Features) (optional)
• 21 CFR Part 11 Compliance. (optional)
• Pneumatic powder loading (optional)
• Inline milling & / or shifting arrangement (optional)

View our 2017 prospectus brochure for an easy to read guide on all of the services offer.

FEATURES

• cGMP Concept
• Single Pot technology for mixing, granulating, drying, blending.
• Yield nearly approaches 99% with negligible handling losses due to single pot.
• Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
• Machine with Inbuilt Blower and AHU
• Online Sampling Device
• Fully Automatic Operation through Programmable Logic Controller
• Accurate temperature control within 2 C
• Flameproof Construction (Optional)
• Bottom Spraying system (Optional)

View our 2017 prospectus brochure for an easy to read guide on all of the services offer.

Cantilever type Roll Compactor with cake Crusher & Two Stage Oscillating Granulator

This high end model operates in completely enclosed manner to comply with highest standard of cGMP guidelines by optimum utilization and at minimal operating cost and wastage.

FEATURES

• Cantilever rolls design
• In line roll compactor with cake crusher & 2 stage granulator
• Comply with cGMP requirements
• WIP Provision
• Water jacketed
• Contact parts S.S.316 without roll
• Machine mobility
• PLC system
• 21 CFR part 11 compliance. (Optional)

CM Mini Roll Compactor is totally based on method of Dry Granulation.

The powder charged in the feed hopper is predensified and fed between two counter rotating rolls.

As the volume decreases through the region of maximum pressure, the material is formed into a solid compacted sheet.

The densified sheets can then be granulated to any desired mesh size with use of CM Granulator or CM Communiting Mill.

CM Mini Roll Compactor is designed to the same principle and mode of operation as that of production size CM Roll Compactor.

batch Capacity in Kg @0.5 bd:1.2 to 3 , 6 to 10, 5 to 15 , 120. Blower motor HP *:5 , 7.5, 10. Air Flow CFM 10 %:250, 350, 530.Drying Temp (deg.C):35-80, Contact Parts:SS 316.

This sturdy GMP square model double rotary tablet press is designed for the production of medium batches with the features like high tonnage, rigid gunmetal feed frame, variable speed pulley drive, overload pressure release arrangement etc. This machine is available in the turret size of 27 stations D & B tooling, 35 stations B tooling & 45 stations BB tooling.

Chamunda Oceanic Ci 6008 is a Double Rotary High Speed Tableting Machine suitable for high volume production requirements. Provided with advance features like Pre-Compression, Upper Punch Penetration, Force Feeding System, Auto Lubrication, The Main compression force is provided through an advance and highly efficient Hydro-Pneumatic Power Pack specially designed and imported to meet the requirements of a tablet press.

This GMP square model single rotary tablet press is an entry level machine and is designed for the production of small batches. This proven machine is suitable for a variety of applications in pharmaceutical and other industries like food, chemical, naphthalene, confectionery etc.

The suitable model can be selected based on the tooling and output requirement from the 16, 20 & 23 stations with the D, D & B/D tooling respectively.

A 12 station model is also available with special tooling and tunnel type can track having max lab Dia-of 40 mm & max depth of fill of 30 mm.

Optional Features

• Force Feeder
• PLC system

FEATURES

• Cantilever roll design
• Comply with all cGMP requirements
• Contact parts SS 316 without roll
• Feed Screw and roll speed through ACVF Drive
• Technical and production Area Separate
• Water Jacketed (optional)
• Flame Proof Controls (optional)
• WIP Systems with tank equipped with heating arrangement. (optional)
• Vertical & Horizontal Feed Screw with De aeration system to avoid air trapping (optional)
• PLC with touch screen (optional)
• PLC with touch screen (with Automation Features) (optional)
• 21 CFR Part 11 Compliance. (optional)
• Pneumatic powder loading (optional)
• Inline milling & / or shifting arrangement (optional)

View our 2017 prospectus brochure for an easy to read guide on all of the services offer.

FEATURES

• cGMP Concept
• Single Pot technology for mixing, granulating, drying, blending.
• Yield nearly approaches 99% with negligible handling losses due to single pot.
• Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
• Machine with Inbuilt Blower and AHU
• Online Sampling Device
• Fully Automatic Operation through Programmable Logic Controller
• Accurate temperature control within 2 C
• Flameproof Construction (Optional)
• Bottom Spraying system (Optional)

View our 2017 prospectus brochure for an easy to read guide on all of the services offer.

Cantilever type Roll Compactor with cake Crusher & Two Stage Oscillating Granulator

This high end model operates in completely enclosed manner to comply with highest standard of cGMP guidelines by optimum utilization and at minimal operating cost and wastage.

FEATURES

• Cantilever rolls design
• In line roll compactor with cake crusher & 2 stage granulator
• Comply with cGMP requirements
• WIP Provision
• Water jacketed
• Contact parts S.S.316 without roll
• Machine mobility
• PLC system
• 21 CFR part 11 compliance. (Optional)

CM Mini Roll Compactor is totally based on method of Dry Granulation.

The powder charged in the feed hopper is predensified and fed between two counter rotating rolls.

As the volume decreases through the region of maximum pressure, the material is formed into a solid compacted sheet.

The densified sheets can then be granulated to any desired mesh size with use of CM Granulator or CM Communiting Mill.

CM Mini Roll Compactor is designed to the same principle and mode of operation as that of production size CM Roll Compactor.

batch Capacity in Kg @0.5 bd:1.2 to 3 , 6 to 10, 5 to 15 , 120. Blower motor HP *:5 , 7.5, 10. Air Flow CFM 10 %:250, 350, 530.Drying Temp (deg.C):35-80, Contact Parts:SS 316.

This sturdy GMP square model double rotary tablet press is designed for the production of medium batches with the features like high tonnage, rigid gunmetal feed frame, variable speed pulley drive, overload pressure release arrangement etc. This machine is available in the turret size of 27 stations D & B tooling, 35 stations B tooling & 45 stations BB tooling.

Chamunda Oceanic Ci 6008 is a Double Rotary High Speed Tableting Machine suitable for high volume production requirements. Provided with advance features like Pre-Compression, Upper Punch Penetration, Force Feeding System, Auto Lubrication, The Main compression force is provided through an advance and highly efficient Hydro-Pneumatic Power Pack specially designed and imported to meet the requirements of a tablet press.

This GMP square model single rotary tablet press is an entry level machine and is designed for the production of small batches. This proven machine is suitable for a variety of applications in pharmaceutical and other industries like food, chemical, naphthalene, confectionery etc.

The suitable model can be selected based on the tooling and output requirement from the 16, 20 & 23 stations with the D, D & B/D tooling respectively.

A 12 station model is also available with special tooling and tunnel type can track having max lab Dia-of 40 mm & max depth of fill of 30 mm.

Optional Features

• Force Feeder
• PLC system