Champaklal & Sons.

Bharuch, Gujarat

Fire fighting handout

kbl is having a wide range of pumps, fr and msf series developed exclusively for fire-fighting applications.fr series are fm approved and ul listed. Msf is ul listed.

highlights of kbl fire pump packages

• diesel engine driven pumpset
• main fire pump-fm approved/ul listed
• diesel engine-fm approved/ul listed heat exchanger cooled
• engine controller-fm approved/ul listed drive shaft
• secondary water-cooling loop

all above equipments are mounted on common skid. Jockey pump with controller mounted on separate skid where controller is fm approved or ul listed.

applications

• commercial complexes
• high rise buildings
• airports and ports
• oil and gas on shore and off shore platforms
• petroleum and petrochemical complexes
• power stations and transformer stations
• warehouses
• manufacturing and chemical industry

we are engaged in supplying a wide quality of Multi Stage Pump : RKB. Offered range is frequently used in water supply to high rise building, irrigation and fire fighting equipments. These pumps are manufactured by premium quality of raw materials and latest technology, which ensure durable life and efficient working capacity. Pumps consume less electricity and are very economic in use.

We have gained recognition as an eminent supplier of Kirloskar Diesel Engines. We offer a quality range of diesel engines, which have longer working life and negligible maintenance. Range of our engines have strong built and rust free body; compact in size and takes lesser place for installation. While manufacturing, international norms are followed. Kirloskar Diesel Engines are very economical and release lesser gasses, hence these are eco-friendly in nature.

Application :

sprinkler irrigation, fire fighting, water supply in high rise buildings, descaling, mine dewatering, booster service, condensate and boiler feed applications, dust precipitation, pumping of light chemicals, etc.

construction features :

these are single suction, horizontal shaft, high pressure multistage pumps, consisting of ring section diffuser casings bolted between suction and delivery casing. Various models are available to operate at 1450rpm and 2900rpm at 50hz and 1750rpm and 3500rpm at 60hz depending upon model.

material of construction :

• casing ci/sgi, cast steel, cf8m
• diffuser ci, zfb, cast steel, cf8m
• impeller ci/aci, bronze, zfb, ph. Bronze, cast steel, cf8m
• shaft carbon steel / st. Steel

FEATURES :
*	Pump without mechanical Seal & without gland packing arrangement.
*	Self venting design.
*	Pump with back pullout design
*	Shaft is fully protected from liquid
*	Widely interchangeable components
Applications :
*	Light chemicals like causticsoda, weal acids etc
*	Food & beverage industries ( Sugar, vegetable oils etc )
*	Hot water, brine, DM water, lime water etc

Can work Under UPS, Work under wide voltage 180240, Self priming up to 7.5 mtrs, Totally enclosed fan cooled (TEFC) Motor, Class "B" insulation.

Features:

• Sturdy built
• Fine finishing
• Long functional life

Further Details: Canned Motor PumpRange

• Delivery size:up to 250 mm
• 3 Capacity:up to 1000m3/hr
• Head:up to 135 m
• Temperature:-40oC to 270oC
• Working Pressure:up to 120 Kg/cm2
• Speed:3000 RPM (Syn) & 1500 RPM (Syn)
• Voltage:415V, 50 Hz 3 Phase

Special Features

• No seal-no leakage
• No coupling-no alignment and no vibration problem
• No separate lubrication of bearing and no contamination of lubricant
• No antifriction bearings
• Small and compact design resulting in saving in installation space
• Easy maintenance and longer life
• Extremely low noise level Absolute safety from risks of fire
• Automatic thrust balancing Vacuum tight construction prevents air contamination of process liquids

Application

The high reliability of these pumps makes them suitable for pumping of toxic, hazardous liquids, high temperature, high pressure services in nuclear power plant, Lithium Bromide circulation in refrigeration plant, Ammonia transfer in fertilizer plants, refineries, chemical and pharmaceutical industries and other process industries for handling toxic, hazardous or expensive fluids.

Construction Features

KBL Canned Motor Pumps are developed, based on the technical know-how from Nikkiso Co.Ltd., Japan. Canned Motor Pump is a centrifugal pump with pump and hermetically sealed electric motor mounted on single shaft thus eliminating the requirement of mechanical seal or other sealing device. Entire rotating assembly is immersed in the liquid, and motor stator and rotor are isolated from the pumped liquid with corrosion resistant, non-magnetic liner and sleeve. A part of the pumped liquid is by-passed through the motor, for cooling of motor and lubricating the bearing.

Casing

Axial suction and top centre line delivery. Smooth hydraulic passages for high efficiency. Volute type casing connected to liner disc and adapter plate.

Impeller

Enclosed/semi-open type, statically and dynamically balanced. Hydraulic balancing of impeller achieved by means of automatic thrust balance arrangement.

Auxiliary impeller for bearing lubrication and motor cooling is also available.

Shaft

Stainless steel shaft accurately machined and ground. It is supported by ceramic/carbon graphite sleeve bearings in motor which are lubricated by pumped liquid. A return passage for circulating liquid for cooling motor and bearing lubrication available through the shaft.

Direction of Rotation

Clockwise viewed from driving end.

Electric Motor

2/4 pole, 3 phase, 415V, 50 Hz, Class of insulation F, H or C. Flame-proof and explosion proof construction with built-in safety devices available.

Flanges

Standard:Drilled to ANSI-B 16.5 Class 300.
Optional:Drilled to DIN/IS/ASA/BS.

Additional Features

• Dry run protection device.
• Single phase protection.
• Over current and under current protection devices.
• Winding temperature detector (Resistance Temperature Detector and Thermistor).
• Bearing wear monitor Mechanical and Electrical.
• Direction of rotation detector.

Material of Construction

Casing:Stainless Steel, CF8M, CF3M
Impeller/Auxiliary Impeller:Stainless Steel, CF8M, CF3M
Stator Liner:Hastelloy, Inconel, SS316L
Rotor Sleeve:Hastelloy, Inconel, SS316L
Bearing:Ceramic, Carbon graphite
Thrust washer:Tungsten Carbide, SS316L with HCR/Ceramic coating
Shaft Sleeve:Tungsten Carbide, SS316L with HCR/Ceramic coating.

These pumps are used for irrigation and water supply application. They are supplied with direct/pulley drive and are electric motor driven or engine driven. Delivery size varies from 50 mm to 150 mm with a power rating of 2.2 kw to 18.33 kw.

Features:

• Suction lift upto 7.5Mtrs.
• Top flat efficiency curve minimum variation in efficiency in entire operating range.
• Efficiency at par with Internationally available pumps higher upto 10 points than minimum required by Indian standard specifications.
• Can be run direct/through pulley with Engine / Motor.
• Design to prevent overloading of Engine / Motor.
• Designed for automatic air release during priming,
• Dynamically balanced rotating parts ensure minimum vibrations.
• Replacable wearing parts a nd hence longer life.
• Better sealing against air leakage due to greater stuffing box depth.
• Provided with outer bearing stand (against requirement) for better support to pulley.

Application :

• Irrigation.
• Industries, for clear water handling.
• Water supply for domestic use in high-rise Apartments, Buildings, Hotels & Farmhouses

Pumping drainage water, storm water and supplying water from settling tanks in water works. In irrigation and agriculture for lift irrigation. In industry for circulation of hot or cold water. In airconditioning plants, power stations, textile mills and sewage handling. These are single stage, horizontal shaft, volute type pumps. These pumps operate at 50 Hz and 60 Hz.