Our Products
Shackle
2 Products availableGearbox & Gear Parts
2 Products availableTrolleys
2 Products availableRope
2 Products availableClamps And Clamping Equipment
1 Products availablePhysiotherapy Products & Equipment
1 Products availableClamps
1 Products availableSteel & Steel Products
1 Products availableWinches
1 Products availableLeading Manufacturer, Supplier & Retailer of .
We are involved in providing a wide range ofWinch Machineto the customers. These products are manufactured using superior quality raw material and advanced techniques at our premises. Our products are manufactured under the profound guidance of our qualified quality inspectors. Further, these products are available in numerous specifications in the nationwide market.
Listed below are some of the features of these products:Manufactured in ISO 9001 : 2008 certified company Assured quality & interchangeability of parts Tested as per ISI procedure for 50% over loadAssured safety Grade 80 load chain & zinc plated hand chain Longer chain life Rugged German design, in use for more than 30 years Assured reliability Double ball bearing supported load wheelSmooth operation Precision machine case hardened alloy steel gears Long life, noseless operation Fully pocketed S.G. iron cast load chain wheel Long life, safe and smooth running Anti corrosive powder coated zinc plated partsAnti rust & better aesthetics
Capacity | MT | 1 | 2 | 3 | 5 | 10 |
Number of falls of load chain | No. | 1 | 1 | 1 | 2 | 4 |
Dimensions | ||||||
A Hook suspension | mm | 400 | 461 | 575 | 805 | 950 |
with trolley, ranges t&2 | mm | 430 | 500 | 705 | 690 | 950 |
with trolley, range 3 | mm | 470 | 540 | 720 | - | - |
B | mm | 180 | 180 | 230 | 280 | 480 |
C | mm | 153 | 153 | 182 | 209 | 220 |
H Hook admittance | mm | 32 | 32 | 42 | 51 | 75 |
• Weight at 3 M | kg | 13 | 19 | 27 | 59 | 130 |
• Extra weight per additional M lilt | kg | 1.8 | 2.6 | 3.0 | 5.7 | 10.1 |
* Running pull on hand chain | kg | 30 | 33 | 36 | 41 | 43 |
Capacity | MT | 0.5 | 1 | 2 | 3 | 5 | 7.5 | 10 |
No. of falls | 1 | 1 | 2 | 2 | 2 | 3 | 4 | |
Running pull on hand chain | Kgs. | 13 | 26 | 28 | 43 | 49 | 50 | 61 |
Weight at 3 metre lift (approx.) | Kgs. | 21 | 21 | 30 | 35 | 60 | 88 | 126 |
Extra weight per additional metre lift (approx.) | Kgs. | 2.9 | 2.9 | 4.3 | 4.3 | 5.2 | 7.0 | 14.4 |
Capacity MT |
A | B | C | D | E | F | H | Mono blocks (not shown) H |
Thrust bearing in bottom block H |
0.5 T | 460 | 210 | 180 | 210 | 195 | 31 | 550 | 500 | 580 |
1T | 460 | 210 | 180 | 210 | 195 | 31 | 550 | 500 | 580 |
2 T | 560 | 240 | 180 | 210 | 195 | 37 | 665 | 620 | 760 |
3 1 | 625 | 240 | 200 | 210 | 195 | 42 | 759 | 635 | 825 |
5 T | 810 | 320 | 225 | 275 | 270 | 51 | 885 | 780 | 1010 |
7.5 T | 910 | 455 | 225 | 275 | 270 | 75 | 1017 | 952 | 1135 |
10 T | 990 | 515 | 225 | 275 | 270 | 75 | 1120 | 1025 | 1240 |
Compact designLow headroom applications Integral trolleyUltra short headroom design for maximum clear lift Grade 80 load chain & zinc plated hand chainLonger chain life Double ball bearing supported load wheel Smooth operation Precision machine case hardened alloy steel gears Long life, noiseless operation Fully pocketed S.G. iron cast load chain wheel Long life, safe and smooth running Anti corrosive powder coated zinc plated parts Anti rust & better aesthetics
Anti drop and de-railing guide Precision-machine runners mounted on sealed ball bearings Available in three basic range with further adjustment of flange width Anti corrosive powder coated finish Non standard speeds, dual speeds available on request Compatible to VVVF designs
Electric | |||||||
Capacity | MT | 1 | 3 | ||||
Inside of wheel flanges mm |
Range 1 | 58-150 | 90-160 | ||||
Range 2 | 150-210 | 160-220 | |||||
Range 3 | 210-305 | 220-305 | |||||
A Seat of susp. plate to runner tread mm |
Range 1 & 2 | 89 | 110 | ||||
Range 3 | 129 | 155 | |||||
B Runner tread diameter | mm | 65 | 90 | ||||
C Runner tread width | mm | 25 | 30 | ||||
D Runner centres | mm | 128 | 157 | ||||
E Underside of runner to suspension plate | 28 | 28 | |||||
F Underside of runners to top of control panel mm |
120 | 120 | |||||
G Beam flange to Panel end mm | 287 | 287 | |||||
H Underside of runner to top of motor | 138 | 138 | |||||
J Track centre line | Range 1 | track | 58-150 | 90-160 | |||
and to motor | widths J | mm | 350-390 | 360-395 | |||
Range 2 | track | 150-210 | 160-220 | ||||
widths J | mm | 390-420 | 395-425 | ||||
Range 3 | track | 210-305 | 220-305 | ||||
widths J | mm | 420-470 | 425-470 | ||||
K Depth of plate | Range 1,2&3 | mm | 21 | 34 | |||
L Overall length | mm | 238 | 350 | ||||
M Underside of runner to flange (push) mm | 75 | 105 | |||||
N Underside of runner to gear tip (geared) mm | 90 | 115 | |||||
Minimum radius of track curve mm | 2000 | 2500 | |||||
Electric travel weight in kg |
Range 1 | 22 | 31 | ||||
Range 2 | 23 | 33 | |||||
Range 3 | 26 | 38 |
Nominal Size |
A |
B |
C |
D |
E |
F |
G |
H |
J |
(Dia. of Rope) d |
|
(3A+2d) |
(E+A) |
(2A+0.6d) |
(1.075d) |
(C+2A) |
(A) |
(2.3A) |
(Approx A) |
8 |
M8 |
40 |
17 |
21 |
9 |
33 |
8 |
18 |
14 |
9 |
M10 |
50 |
21 |
26 |
11 |
41 |
10 |
23 |
18 |
10 |
M10 |
50 |
21 |
26 |
11 |
41 |
10 |
23 |
18 |
11 |
M12 |
60 |
25 |
31 |
13 |
49 |
12 |
28 |
22 |
12 |
M12 |
60 |
25 |
31 |
13 |
49 |
12 |
28 |
22 |
13 |
M12 |
64 |
27 |
32 |
15 |
51 |
12 |
28 |
22 |
14 |
M12 |
64 |
27 |
32 |
15 |
51 |
12 |
28 |
22 |
16 |
M14 |
74 |
31 |
38 |
17 |
59 |
14 |
32 |
25 |
18 |
M14 |
82 |
36 |
40 |
22 |
64 |
14 |
32 |
25 |
19 |
M14 |
82 |
36 |
40 |
22 |
64 |
14 |
32 |
25 |
20 |
M14 |
82 |
36 |
40 |
22 |
64 |
14 |
32 |
25 |
22 |
M16 |
92 |
40 |
45 |
24 |
72 |
16 |
37 |
29 |
24 |
M20 |
110 |
47 |
55 |
27 |
87 |
20 |
46 |
36 |
26 |
M20 |
118 |
51 |
57 |
31 |
91 |
20 |
46 |
36 |
28 |
M20 |
118 |
51 |
57 |
31 |
91 |
20 |
46 |
36 |
32 |
M20 |
124 |
54 |
59 |
34 |
94 |
20 |
46 |
36 |
35 |
M22 |
136 |
60 |
65 |
38 |
104 |
22 |
51 |
40 |
36 |
M22 |
142 |
63 |
67 |
41 |
107 |
22 |
51 |
40 |
38 |
M22 |
142 |
63 |
67 |
41 |
107 |
22 |
51 |
40 |
41 |
M25 |
157 |
69 |
75 |
44 |
119 |
25 |
58 |
45 |
Available in push or hand geared travel.Anti drop and de-railing guidePrecision-machine runners mounted on sealed ball bearings.Available in three basic range with further adjustment of flange width.Anti-corrosive powder coated finish.
Push | Push Geared | Geared | Geared | ||||||
Capacity MT | 0.5 | 1 | 3 | 5 | 10 | ||||
Inside of Wheel flanges mm | Range 1 | 50-130 | S8-1M) | 90-160 | 110-150 | 140 I80 | |||
Range 2 | 140-200 | 150-210 | ! 60-220 | 160-210 | 190? 10 | ||||
Range 3 | 210-305 | 210-305 | 220-305 | 215-265 | 215-245 | ||||
A Seat of susp. plate 10 runner tread/Beam Bottom | Range 1 & 2 mm | 75 | 89 | 1 10 | 84 | 137 | |||
Range 3 mm | 115 | 129 | 155 | ||||||
B Runner : tread diameter | 50 | 65 | 90 | 175 | 225 | ||||
C Runner tread width mm | 20 | 25 | 30 | 45 | 50 | ||||
D Runner centers | (push) min | 70 | 90 | 125 | - | • | |||
(geared) mm | - | 123 | 157 | 253 | 313 | ||||
E Underside of runner to suspension plate | 18 | 28 | 28 | - | - | ||||
F Underside of runners to top of hand chain wheel geared travel only mm | 101 | 106 | 123 | - | - | ||||
G Beam flange to shaft end | mm | - | 124 | 124 | 180 | 275 | |||
H Overall width, push travel only | Range 1 mm | 210 | 248 | 27-3 | - | - | |||
Range 2 mm | 320 | 320 | 340 | ||||||
Range 3 mm | 410 | 410 | 425 | ||||||
J Cross bolt to track centreline on ungeared side (geared trolleys only) | Range 1 | track widths J mm |
- | 58-100 132 |
100-126 lb? |
170 | 210 | ||
track widths J mm |
- | 100 -140 120 |
126 153 134 |
||||||
Range 2 | track widths J mm |
- | 140-166 164 |
153-192 184 |
200 | 225 | |||
track widths J mm |
- | 166-210 152 |
192-216 166 |
||||||
Range 3 | track widths J mm |
- | 210-263 238 |
216-263 2C5 |
225 | 240 | |||
track widths J mm |
- | 263-305 205 |
263-305 213 |
||||||
K Depth of plate Range 1. 2 S 3 mm | 21 | 21 | 34 | - | - | ||||
L Overall length | (push) mm | 160 | 200 | 275 | - | - | |||
(geared) min | - | 238 | 350 | 550 | 690 | ||||
M Underside to runner to flange push mm | 60 | 75 | 105 | - | - | ||||
N Underside of runner lo gear tip (geared) mm | - | 90 | 115 | - | - | ||||
Minimum radius of track curve mm | (push) | 1250 | 2000 | 2500 | |||||
(geared) | 2000 | 2500 | 2600 | 3200 | |||||
Push travel weight in Kg |
Range 1 | A 0 | 10.5 | 18.5 | |||||
Range 2 | 4.5 | 11.0 | 20.0 | ||||||
Range 3 | 6.5 | 14 5 | 25.5 | ||||||
Geared travel weight tn Kg |
Range 1 | - | 11.5 | 20.0 | 70 | 151 | |||
Range 2 | - | 12.5 | 21.5 | 72 | 153 | ||||
Range 3 | - | 16.0 | 27.0 | 75 | 155 |
1. Nominal 1.5 mm clearance to be allowed from edge of track flange to inside of wheel flange (3mm overall on both side)
2. Overall width of geared travel trolleys = J + (1/2 x track width) + G. On 500 to 2500 Kg. units when using the narrower track widths the cross bolt adjusting washers are to be assembled such that the end of the cross bolt is clear of the hand chain wheel.
3. Weight of trolleys only exclude hand chain. Hand chain is 0.45kg/m per linear length.
4. Bottom of hand chain loop is 800 mm from ground level.
5. Pusher bar fixing holes provided upto 3T models.
6. Anti-tip stop fitted to all hand geared versions upto 3T models.
We are backed by a Our range of high quality wire ropes & steel wire ropes are designed for most challenging conditions. These products are corrosion and rust resistant and have high mechanical strength. Every product is designed, keeping in mind ease of use and safety of the operator.
A | MASS | DIN3066-72 | MASS | DIN3060-72 | ||||||||||||
6X37 | 6 X 37 | 6X19 | 6 X 19 | |||||||||||||
kg/100mtrs | Mm-Breaking-Load-KN | kg/100mtrs | Mm-Breaking-Load-KN | |||||||||||||
1670N/mm2 | 1770N/mm2 | 1870N/mm2 | 1670N/mm2 | 1770N/mm2 | 1870N/mm2 | |||||||||||
FMC | IWRC | FMC | IWR | FMC | IWR | FMC | IWR | FMC | IWC | FMC | IWR | FMC | IWC | FMC | IWC | |
3 | * | * | * | * | * | * | * | * | 3.11 | 3.43 | 4.61 | 4.98 | 4.89 | 5.28 | 5.16 | 5.58 |
4 | * | * | * | * | * | * | * | * | 5.54 | 6.10 | 8.20 | 8.87 | 8.69 | 9.40 | 9.18 | 9.93 |
5 | 8.65 | 9.52 | 12.3 | 13.3 | 13.0 | 14.1 | 13.7 | 14.9 | 8.65 | 9.52 | 12.8 | 13.8 | 13.5 | 14.6 | 14.3 | 15.5 |
6 | 12.5 | 13.7 | 17.7 | 19.1 | 18.7 | 20.3 | 19.8 | 21.4 | 12.5 | 13.7 | 18.4 | 19.9 | 19.5 | 21.1 | 20.6 | 22.3 |
7 | 17.0 | 18.7 | 24.1 | 26.1 | 25.5 | 27.6 | 27.0 | 29.2 | 17.0 | 18.7 | 25.1 | 27.1 | 26.6 | 28.7 | 28.1 | 30.4 |
8 | 22.1 | 24.4 | 31.5 | 34.0 | 33.4 | 36.1 | 35.3 | 38.1 | 22.1 | 24.4 | 32.8 | 35.4 | 34.7 | 37.6 | 36.7 | 39.7 |
9 | 28.0 | 30.9 | 39.9 | 43.1 | 42.2 | 45.7 | 44.6 | 48.3 | 28.0 | 30.9 | 41.5 | 44.9 | 44.0 | 47.5 | 46.5 | 50.2 |
10 | 34.6 | 38.1 | 49.2 | 53.2 | 52.2 | 56,4 | 55.1 | 59.6 | 34.6 | 38.1 | 51.2 | 55.4 | 54.3 | 58.7 | 57.4 | 62.0 |
11 | 41.9 | 46.1 | 59.6 | 64.6 | 63.1 | 68.3 | 66.7 | 72.1 | 41.9 | 46.1 | 62.0 | 67.0 | 65.7 | 71.1 | 69.4 | 75.1 |
12 | 49.8 | 54.9 | 70.9 | 76.7 | 75.1 | 81.3 | 79.4 | 85.9 | 49.8 | 54.9 | 73.8 | 79.8 | 78.2 | 84.6 | 82.6 | 89.4 |
13 | 58.5 | 64.4 | 83.2 | 90.0 | 88.2 | 95.4 | 93,2 | 100 | 58.5 | 64.4 | 86.6 | 93.7 | 99.8 | 99.3 | 97.0 | 104 |
14 | 67.8 | 74.7 | 96.5 | 104 | 102 | 110 | 108 | 116 | 67.8 | 74.7 | 100 | 108 | 106 | 115 | 112 | 121 |
16 | 88.6 | 97.5 | 126 | 136 | 133 | 144 | 141 | 152 | 88.6 | 97.5 | 131 | 141 | 139 | 150 | 146 | 158 |
18 | 112 | 123 | 159 | 172 | 169 | 182 | 178 | 193 | 112 | 123 | 166 | 179 | 176 | 190 | 186 | 201 |
20 | 138 | 152 | 197 | 213 | 208 | 225 | 220 | 238 | 138 | 152 | 205 | 221 | 217 | 235 | 229 | 248 |
22 | 167 | 184 | 238 | 257 | 252 | 273 | 266 | 288 | 167 | 184 | 248 | 268 | 263 | 284 | 277 | 300 |
24 | 199 | 219 | 283 | 306 | 300 | 325 | 317 | 343 | 199 | 219 | 295 | 319 | 312 | 338 | 330 | 357 |
26 | 234 | 258 | 333 | 360 | 352 | 381 | 372 | 403 | 234 | 258 | 346 | 374 | 367 | 397 | 388 | 419 |
28 | 271 | 299 | 386 | 417 | 409 | 442 | 432 | 467 | 271 | 299 | 401 | 434 | 426 | 460 | 450 | 486 |
30 | 311 | 343 | 443 | 479 | 469 | 508 | 496 | 536 | 311 | 343 | 461 | 498 | 489 | 528 | 516 | 558 |
32 | 354 | 390 | 504 | 545 | 534 | 578 | 564 | 610 | 354 | 390 | 524 | 567 | 556 | 601 | 587 | 635 |
34 | 400 | 440 | 569 | 615 | 603 | 652 | 637 | 689 | 400 | 440 | 592 | 640 | 628 | 679 | 663 | 717 |
36 | 448 | 494 | 638 | 690 | 676 | 731 | 714 | 773 | 448 | 494 | 664 | 718 | 704 | 761 | 744 | 804 |
38 | 500 | 550 | 711 | 769 | 753 | 815 | 796 | 861 | 500 | 550 | 740 | 800 | 784 | 848 | 828 | 896 |
40 | 554 | 610 | 788 | 852 | 835 | 903 | 882 | 954 | 554 | 610 | 820 | 887 | 869 | 940 | 918 | 993 |
42 | 610 | 672 | 852 | 939 | 921 | 996 | 973 | 1050 | 610 | 672 | 904 | 978 | 958 | 1030 | 1010 | 1090 |
44 | 670 | 738 | 953 | 1030 | 1010 | 1090 | 1060 | 1150 | 670 | 738 | 992 | 1070 | 1050 | 1130 | 1110 | 1200 |
46 | 732 | 806 | 1040 | 1120 | 1100 | 1190 | 1160 | 1260 | 732 | 806 | 1080 | 1170 | 1140 | 1240 | 1210 | 1310 |
48 | 797 | 878 | 1130 | 1220 | 1200 | 1300 | 1270 | 1370 | * | * | * | * | * | * | * | * |
50 | 865 | 952 | 1230 | 1330 | 1300 | 1410 | 1370 | 1490 | * | * | * | * | * | * | * | * |
52 | 936 | 1030 | 1330 | 1440 | 1410 | 1520 | 1490 | 1610 | * | * | * | * | * | * | * | * |
54 | 1010 | 1110 | 1430 | 1550 | 1520 | 1640 | 1600 | 1730 | * | * | * | * | * | * | * | * |
56 | 1090 | 1190 | 1540 | 1670 | 1630 | 1770 | 1720 | 1870 | * | * | * | * | * | * | * | * |
58 | 1160 | 1280 | 1650 | 1790 | 1750 | 1890 | 1850 | 2000 | * | * | * | * | * | * | * | * |
60 | 1250 | 1370 | 1770 | 1910 | 1870 | 2030 | 1980 | 2140 | * | * | * | * | * | * | * | * |
62 | 1330 | 1460 | 1890 | 2040 | 2000 | 2170 | 2120 | 2290 | * | * | * | * | * | * | * | * |
64 | 1420 | 1560 | 2010 | 2180 | 2130 | 2310 | 2250 | 2240 | * | * | * | * | * | * | * | * |
66 | 1510 | 1660 | 2140 | 2320 | 2270 | 2450 | 2440 | 2590 | * | * | * | * | * | * | * |
We have with us an assorted range of high qualityShackles that comes in a variety of sizes. Extensivelyused in the lifting accessories, rigging hardware companies, marine industries, construction companies, finished machinery manufacturers, heavy equipment manufacturers, these are widely appreciated for features like high tensile strength, resistance against corrosion and abrasion and capacity to withstand high temperatures. These are fabricated as per is standards.
We are engaged in offering bow shackles which are made from using quality raw material such as steel, ensuring its effectual functioning and high performance. Our range is offered in various sizes and configuration to suit the clients requirements. These cater to the requirements of construction and building industries.
Jaw Inside Width |
Inside Length |
Body Material Diameter |
Pin Diameter |
Eye Outside Diameter e min |
Safe Working Load, Tonnes |
|||
Grade-30 |
Grade-40 |
Grade-63 |
Grade-80 |
|||||
18 |
40 |
10 |
12 |
24 |
--- |
--- |
1.0 |
--- |
Our organization manufactures and exports a quality assured range ofPolypropelene Ropes, which are available as per the given information by our clients and these products are used invarious industrial applications.We offer these products incustom made designsand these are delivered ina safe as well as reliable manner.Thus, these products are having a huge demand for their long working life as well as efficiency.
Features:he dimensions and properties completely confirm to Grade B and C requirements specified in the National Industrial StandardsGB/ T 12718 and DIN22252- 1/2
Material: High alloy steelBreaking Elongation: 12% maxFinish: Rust preventive oil coating or black painting
erial No. | Width | Weight | Breaking Load min. | ||
Normal size | Inside | outside | ||||
dxp mm |
a min. |
b max. |
Kgs max |
KN min |
|
1. | 10 x 40 | 15 | 37 | 1.9 | 125 |
2. | 13 x 52 | 19.5 | 48.5 | 3.31 | 214 |
3. | 14 x50 | 18.5 | 49.5 | 4 | 250 |
4. | 16 x 64 | 24 | 59 | 4.97 | 320 |
5. | 19 x 76 | 28.5 | 69.5 | 6.92 | 450 |
6. | 22 x 86 | 27 | 74 | 9.5 | 610 |
7. | 26 x 92 | 31 | 86 | 13.7 | 850 |
Tested as per ISI procedure for 50% over loadAssured safety Grade 80 load chain & zinc plated hand chain Longer chain life Rugged German design, in use for more than 30 years Assured reliability Double ball bearing supported load wheel Smooth operation Precision machine case hardened alloy steel gears Long life, noiseless operation Non-ferrous parts like chain wheels, chain guides, ratchet wheel and stripping forkEliminates spark generation possibilities during rubbing of mating components Anti-corrosive powder coated zinc plated parts Anti rust & better aesthetics