Chaitanya Engineering

Parvati, Pune, Maharashtra

Features :

• It is a quality test equipment for cement industry.
• It is used to determine the percentage of free lime in cement or clinker sample.
• It is an automatic system based on advanced technology of conductivity principle.
• It gives accurate results in very less time as compared to traditional method.
• It requires very little quantity of ethylene glycol per cycle which results in effective saving of ethylene glycol.
• Direct display of result is available.
• Manual errors & fatigue are fully eliminated.
• It operates through advance electronic control system.
• Easy to operate & almost maintenance free.

Features :

• This machine is an essential part of any filter testing or R&D laboratory. So any filter manufacturing company needs this machine in their quality lab.
• It is an in-line dust feeding system which accurately feeds the dust as per the set feed rate during the testing of air filters.
• It has wide range for feed rates : 20 g/min to 150g/min. ( can be customized according to customer’s requirements)
• Low % error, below  2%
• Works based on advanced system using servo motor, servo motor drive & dedicated electronic controller.
• Whole system is mounted on electronic balance & in continuous close loop which results in highly accurate feed rate.
• Special drain mode is provided to empty the hopper quickly.
• A machine with low maintenance & easy to operate.

Features :

• This machine is an essential part of any filter testing or R&D laboratory. So any filter manufacturing company needs this machine in their quality lab.
• It is an in-line dust feeding system which accurately feeds the dust as per the set feed rate during the testing of air filters.
• It has wide range for feed rates : 20 g/min to 90g/min. ( can be customized according to customer’s requirements)
• Low % error, below  5%
• Works based on advanced system using AC drive.
• A machine with low maintenance & easy to operate.

Features :

• It is an advanced equipment to determine fineness of cement, clinker or any powdery material in terms of specific surface expressed as total surface area per kg of the material by using Blaine’s air permeability method.
• It is essential laboratory equipment for cement industry for quality assurance.
• A fully automatic system for calculating Blaine Air Permeability number (Blaine value) of cement/ clinker or any powdery material.
• It operates through advance electronic controller which directly produces accurate final results within seconds, so no need to do any manual calculations.
• Because of the automation there is no need to watch the liquid level manually or to operate the stop watch, which reduces the manual errors & operator fatigue to zero.
• With the help of PC software it can be connected & operated through PC. Because of the facility of data logging unlimited data can be stored in excel format.
• Facility for selection of 15 different cement types’
• Requires no maintenance.
• Easy to operate & handle.

We have the latest equipment and technology for the strict checking of raw material at the initial stage only. We ensure that prior to manufacturing the material is checked on the grounds of quality. In our well-structured warehouse, we store the entire lot in a secured manner under the strict supervision of our expert warehouse personnel. Moreover, our facility is installed with all required amenities needed for safe storage.

Features :

• A filling system for edible/industrial oils.
• It is suitable for filling tins of 5 kg to 15 kg from an overhead tank.
• It dispenses the predefined quantity of the material.
• It is a feedback system & dispenses the material by weight.
• Consists of a load cell which continuously gives feedback to controller.
• Very high accuracy of dispense quantity.
• It causes no handling of the material

Our products are packed under controlled conditions to ensure their quality is not compromised and buyers are presented with brand new products. We have an ultramodern facility to pack our products. For the convenience of our customers, we issue an invoice stating the entire details such as products, quantities and agreed price. Moreover, we ensure safe and hassle-free payment procedure.

Features :

• A vending system for edible/industrial oils.
• It dispenses the predefined quantity of the material.
• It is a feedback system & dispenses the material by weight.
• Consists of a load cell which continuously gives feedback to controller.
• Very high accuracy of dispense quantity.
• It causes no handling of the material.
• Ideal for shops.

As a customer-focused firm, we strive hard to delight them with high quality range of products that are the perfect outcome of premium raw material and modern work methods. Ours is a renowned name in the field of supplying comprehensive array of Jelly Dispenser Machine.

Features :

• A dispensing system for semisolid products like Jelly.
• For example cosmetic jells like aloevera Jell. 
• It dispenses the predefined quantity of the material.
• It is a time base system & dispenses the material volumetrically.
• It is very useful machine to fill small bottles of  jelly material at high speed.
• If coupled with a conveyor it gives high rate of production.
• It causes no handling of the material.
• High accuracy of fill quantity.
• Easy to clean & maintain.