Chandawala Auto Industries

Focal Point, Ludhiana, Punjab

Specifications :

• Thread Size : M8 to M20,  5/16” to 3/4"
• Length Under The Head : 35MM to 550MM,  1.1/2" to 22”
• Thread : I.S.O. metric (fine & rough), UNF / UNC
• Material : low carbon steel, AISI 1010, EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541
• I.S.O. Material Strength Grade :  4.6, 5.8, 6. 8, 8. 8
• SAE Material Strength Grade :  2, 5
• Surface Treatment : autoblack & oiled, phosphated & oiled, clear (blue) zinc electroplated, yellow zinc electroplated
• Head forms : fillister head, milled head, step head, dome head

Specifications :

• Thread size : M12 to M26,   7/16” to 1"
• Length under the head : 25MM to 150MM,   1" to 6”
• Thread : I.S.O. metric (fine & rough), UNF / UNC
• Material : EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541, EN 18 /AISI 5140/37Cr4, EN 19/AISI 4140 /42Cr4Mo2
• I.S.O. material strength grade :  6. 8, 8. 8, 10.9, 12.9
• SAE material strength grade :  5, 8
• Surface treatment : phosphate, clear zinc electroplated, yellow zinc electroplated, dichromate, geomet
• Application : They are mounted to the automobile hubs that secure the wheels with Nuts
• Sizes : As per the application or customer requirement
• Thread : I.S.O. metric (fine & rough), UNF / UNC
• Material : EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541, EN 18 /AISI 5140/37Cr4, EN 19/AISI 4140 /42Cr4Mo2
• I.S.O. material strength grade :  6. 8, 8. 8, 10.9, 12.9
• SAE material strength grade :  2, 5, 8
• Surface treatment : phosphate, clear zinc electroplated, yellow zinc electroplated, dichromate

Specifications :

• Thread Size : M10 to M30, 3/8 to 1"
• Gap Between the legs : 50MM to 170MM, 2" to 7"
• Length Along The Side : 125MM to 650MM, 5" to 26"
• Thread : I.S.O. metric (fine & rough), UNF / UNC,   BSF / BSW
• Material : low carbon steel, AISI 1010, EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541, EN 18 /AISI 5140/37Cr4, EN 19/AISI 4140 /42Cr4Mo2
• I.S.O. Material Strength Grade :  4.6, 5.8, 6. 8, 8. 8, 10.9, 12.9  SAE material strength grade :  2, 5, 8
• Surface treatment : black paint, red paint, blue paint, clear (blue) zinc electroplated, yellow zinc electroplated, phosphate
• Forms : round, half round, square(flat), round forged, semi round forged, square forged
• Application : Volvo Front, Landcruiser Front, Canter, Isuzu NKR, Isuzu TXD, Nissan CB31, Hilux Rear, Hiace Rear, Eicher Canter, Swaraj Mazda, TATA Ace
• Sizes : As per the application or as per customer requirement
• Thread : I.S.O. metric (fine & rough), UNF, UNC, BSF, BSW Material : AISI 1015, EN 8D, AISI 1045, EN 15, AISI 1541, EN 18, EN 19, AISI 4140
• I.S.O. material strength grad : 5.8, 6.8, 8.8, 10.9, 12.9
• SAE material strength grade : 2, 5, 8
• Surface treatment : Paint (Red / Black /Grey), phosphate, white zinc electroplated, yellow zinc electroplated, black oxide, hot dip galvanized, dichromate

Specifications :

• Standard : DIN 7643 or as per customer specification
• Material : Mild Steel, EN 1AL(free cutting steel), 11SMnPb30, EN 8 / AISI1045
• Thread : I.S.O. metric (fine & rough)
• Surface treatment : clear /yellow zinc plated, olive green zinc plated, dacromet
• Type : 2 holes, 3 holes, 4 holes
• Common sizes : M10x1.25X19, M12x1.25X24, M14x1.5X26, M16x1.5X28, M18x1.5X32

Other Information :

• Application : Automotive fuel, oil and hydraulic systems
• Standard : DIN 7643
• Sizes : As per the attached PDF file
• Material : Mild Steel, EN 1AL(free cutting steel), 11SMnPb30, EN 8 / AISI1045
• Thread : I.S.O. metric (fine & rough)
• Surface treatment : clear /yellow zinc plated, olive green zinc plated, dichromate

Specifications :

• Standard : DIN 74361 form H or as per customer specification
• Material : EN 8D/AISI 1045, EN 19/42Cr4Mo2
• ISO property class : 8, 10
• Thread : I.S.O. metric (fine & rough), UNF / UNC
• Surface treatment : Phosphate, Auto black, Dichromate, Geomet
• Common sizes : M18x1.5, M20x1.5, M22x1.5, M

Specifications :

• Standard : DIN 931/ISO 4014, DIN 933/ISO 4017, DIN 960/ISO 8765, DIN 961/ISO 8676, ANSI B18.2.3.1M, BS 1768, DIN 6914/ISO 7412/ANSI B18.2.3.7M, DIN 6921
• Thread size : M8 to M52,  5/16” to 2"
• Length under the head : 15MM to 500MM,   9/16" to 20”
• We are counted among agile Manufacturers, Exporters and Suppliers of Hex Head Bolts from Mumbai, Maharashtra. Hex Head Bolts are made from superior quality material in conformity with set industry norms. Our Hex Head Bolts are used for fastening objects. These bolts are available with us in different specifications to fulfill buyer’s requirements. We offer our Hex Head Bolts at competitive market rates to our customers.

Specifications :

• Standard : DIN 931/ISO 4014, DIN 933/ISO 4017, DIN 960/ISO 8765, DIN 961/ISO 8676, ANSI B18.2.3.1M, BS 1768, DIN 6914/ISO 7412/ANSI B18.2.3.7M, DIN 6921
• Thread size : M8 to M52,  5/16” to 2"
• Length under the head : 15MM to 500MM,   9/16" to 20”
• Thread : I.S.O. metric (fine & rough), UNF / UNC, BSF / BSW
• Material : low carbon steel, EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541, EN 18 /AISI 5140/37Cr4, EN 19/AISI 4140 /42Cr4Mo2, SAE 10B21, SAE 15B25, SAE 15B41, S.S.304, S.S.316
• I.S.O. material strength grade :  4.6, 5.8, 6. 8, 8. 8, 10.9, 12.9
• SAE material strength grade :  2, 5, 8
• Surface treatment : auto black, phosphate, clear (blue) zinc electroplated, yellow zinc electroplated, hot dip galvanized, dichromate, geomet I.S.O. metric (fine & rough), UNF / UNC, BSF / BSW
• Material : low carbon steel, EN 8/AISI 1035, EN 8D/AISI 1045, EN 15/AISI 1541, EN 18 /AISI 5140/37Cr4, EN 19/AISI 4140 /42Cr4Mo2, SAE 10B21, SAE 15B25, SAE 15B41, S.S.304, S.S.316
• I.S.O. material strength grade :  4.6, 5.8, 6. 8, 8. 8, 10.9, 12.9
• SAE material strength grade :  2, 5, 8
• Surface treatment : auto black, phosphate, clear (blue) zinc electroplated, yellow zinc electroplated, hot dip galvanized, dichromate, geomet