Century Inks Pvt. Ltd.

Kandivali East, Mumbai, Maharashtra

Centurys Everon Marker is a unique marking device used in textile mills & factories for permanent marking on gray cloth & fabrics. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. It is also known as 'pump-type marker' or 'TEXPEN. The viscous ink makes permanent, bright & opaque markings on all kinds of fabrics and remains visible even after the dyeing & other finishing processes. It works on all kinds of fabrics like cotton, denim, polyester, wool, silk, linen etc. It is widely used in dyeing houses & textile mills in processes like dyeing, scouring, bleaching, hosiery, knitting & weaving.

Everon Marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type markers where almost 20% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube.

Centurys Stainless Steel Marker is an industrial grade valve action paint marker for all surfaces. It is made up of an aluminum body filled with ink & a felt-tip with valve action for smooth ink flow. The ink has very few traces of chloride, sulphur, low melting metals & halogens which wont contaminate or scath the surface being marked. The ink formulation meets or exceeds the specifications for GE Nuclear Energy, GE Aircraft Engines and the US Energy Research and Development Administration (nuclear grade). It can mark on all surfaces including metal, plastics, steel, ceramic, glass, concrete etc. The markings do not fade or remove under adverse weather conditions & heat too. It is ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries.

Centurys Tex Marker is a collapsible aluminum writing device filled with ink used for marking on fabric samples for identification. It is used by textile mills & processing houses before dyeing and finishing processes of grey fabric for identification, quality control, shrinkage, pilferage etc. The marking remain permanent, bright & opaque even after the dyeing & finishing processes are completed. It is widely used in textile industry for dyeing, bleaching, hosiery, knitting, scouring & weaving processes.

Advantages:

Centurys Fine-tip metal marker is a permanent marker for making bright, opaque and fades proof markings on any surface. The unique stainless steel fine tip makes it very easy to mark on smaller objects & places which are difficult to mark with regular broad tip markers. The marker has a hard aluminum body filled with ink & a rubber valve at the bottom, when pumped slightly pushes ink towards a fine ball point for sharp markings. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease.

Centurys Stainless Steel Marker is an industrial grade valve action paint marker for all surfaces. It is made up of an aluminum body filled with ink & a felt-tip with valve action for smooth ink flow. The ink has very few traces of chloride, sulphur, low melting metals & halogens which wont contaminate or scath the surface being marked. The ink formulation meets or exceeds the specifications for GE Nuclear Energy, GE Aircraft Engines and the US Energy Research and Development Administration (nuclear grade). It can mark on all surfaces including metal, plastics, steel, ceramic, glass, concrete etc. The markings do not fade or remove under adverse weather conditions & heat too. It is ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries.Advantages:

Century's tex marker it is a collapsible aluminum writing tube filled with ink used for marking the fabrics samples for identification purposes by textile mills, processing houses before dyeing and printing of grey fabric for quality control, shrinkage, pilferage as the marking remains permanent and visible in dark shades also. Widely used in for dyeing, bleaching, hoisery, knitting, scouring & weaving colors available : yellow, red, black, blue, orange, green and white. Quick drying and without any bleeding. Resistance for acids and alkalis. Withstand all textile sorting sizing and finishing processes. Quick identification of lots upon fabrics dyed in dark shades also. Most economical method of marking on gray fabrics before processing. Ink content : 70 gm tip sizes available point no.2: writes 2 mm wide for general purpose point no.3:writes 3 mm wide, specially for knitted hosiery denim fabric and canvas type fabric. Point no.4: for raised fabrics. Product code yellow red orange black blue green white 11201 11202 11203 11204 11205 11206 11207 11301 11302 11303 11304 11305 11306 11307 11401 11402 11403 11404 11405 11406 11407 century inks has developed superior quality pump type marker first time in india. Various packaging >>

Century's stainless steel marker popularly known as ' high purity ' or 'nuclear grade' marker is an industrial grade valve action paint marker with a laboratory certified ink which contains low chloride content. These markers are used to safely mark nuclear pipes, vessels, parts. It is also used in automotive industry, aircraft industry & welding operations. The us laboratory certified ink does not adversely affect or damage the surface being marked. century inks is the only supplier for this marker in india. The price for the marker is inr 299. For bulk quantities please contact our sales department. Colours available are black & white. For other colours contact our sales team.

Metal marker is a permanent marker for making weather proof marking for industrial purpose. The markings made by the marker wont chippeelfade or rub off and it can withstand heat and weathering under adverse conditions. Its made of up aluminium tube filled with ink with a stainless steel tip for making smooth and neat markings on any metal surface. it is ideal for marking or drawings on any surface, whether wet, oily, dry, steel, casting wood, cardboard, glass etc. The marker can also write under water. The marker will be available in tube type (toothpaste) marker and pump-type i.e. Rubber valve marker. It is available in box packing on 10 pcs and even single pcs blister packing. Directions for use remove dust from surface to be marked.Hold the marker vertically and press the ball to surface and draw codes.Steel ball at the tip is for sealing, wipe off when found dry to restore the flow.Clean the tip and replace the cap after each use.Use before 12 months for better result. Cautiondo not fold the tube to avoid leakage and breakage.Harmful if swallowed or intentional inhalation.Avoid contact with eyes. Keep away from open flame.Please test before use.

Century's plastic marker directions for use hold the pen vertically while writing. Keep enough pressure on the pen so that ink may come out fluently. However, dont press too much. Clean the pen nib after each use and then put on the pen cap immediately to prevent ink from drying up. Use within 12 months for better result. uses permanent weather proof marking for industrial purpose, marking wont chip peel, fade or rub off. Can withstand heat and weathering under adverse conditions. Writes on hdpe woven sacks, plastic carboy, pvc drum, wood, cardboard, rubber, leather and hard to marker surfaces. Colours available : black , white , red, blue green and yellow.

Century's uv security marker is a feltip paint marker with applications in wide range of industries including hospitality industry, hotel industry, manufacturing , security etc. Its marking are only visible in black light or 'uv light'. It is used in hotels & hospitals for quality and security markings. It is also used in manufacturing units, automobile industry, repair workshops, laundry, clubs, army etc. The markings made by the marker are permanent & weather-proof. It works on all porous & non-porous surfaces including metal, plastic, glass, ceramic, rubber and stone. The ink is xylene free. The marker is very popular in europe & america and widely used across all kind of sectors. century inks is the only company to manufacture & supply this marker in india. The price for the marker is inr 299. For bulk quantities, contact us via email, phone or fax. Colour available in greenish yellow.

Century's high temperature marker is a industrial grade valve action paint marker used in metal, steel, glass & ceramic manufacturing industries. The markings made by the marker remain permanent at high temperatures upto 1093 degrees celsius. The marker works on all porous & non-porous surfaces including metal, glass, ceramic, wood, plastic, rough, smooth etc. century ink is the only one in india to manufacture feltip high temperature markers. Colour available in black. For other colours please contact our sales department.

It is an aluminum cigar type rigid tube with a hemispherical rubber at one end, when pumped slightly compresses ink towards a fine ball point for smooth flow and easy writing. It is popularly known as 'pump-type marker' or 'texpen'.it's rigid body prevents breakage, leakage and puncture while using. Widely used in dyeing houses in processes like dyeing, scouring, bleaching, hoisery, knitting & weaving of grey fabric. ink content is 15% more no wastage of ink. everon marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type where almost 25% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube. Colors available : yellow, red, black, blue, orange, green and white. Tip sizes available point no.2 : writes 2 mm wide for general purpose point no.3 : writes 3 mm wide, specially for knitted hosiery denim fabric and canvas type fabric. point no.4. : for raised fabrics. Product code yellow red orange black blue green white point 2 21201 21202 21203 21204 21205 21206 21207 point 3 21301 21302 21303 21304 21305 21306 21307 point 4 21401 21402 21403 21404 21405 21406 21407 ink content 80gram

Metal marker is a permanent marker for making weather proof marking for industrial purpose. The markings made by the marker wont chippeelfade or rub off and it can withstand heat and weathering under adverse conditions. Its made of up aluminium tube filled with ink with a stainless steel tip for making smooth and neat markings on any metal surface. it is ideal for marking or drawings on any surface, whether wet, oily, dry, steel, casting wood, cardboard, glass etc. The marker can also write under water. The marker will be available in tube type (toothpaste) marker and pump-type i.e. Rubber valve marker. It is available in box packing on 10 pcs and even single pcs blister packing. Directions for use remove dust from surface to be marked.Hold the marker vertically and press the ball to surface and draw codes.Steel ball at the tip is for sealing, wipe off when found dry to restore the flow.Clean the tip and replace the cap after each use.Use before 12 months for better result. Cautiondo not fold the tube to avoid leakage and breakage.Harmful if swallowed or intentional inhalation.Avoid contact with eyes. Keep away from open flame.Please test before use.

Century bleed thru marker is a industrial grade valve action paint marker used to make markings on unpainted metals, plastic & wooden surfaces. The marker can make markings on any kind of surface. The markings remain highlighted even after writing or painting over the markings. Century inks is the only manufacturer for bleed thru markers in india.