Century Inks Pvt Ltd Mumbai, Maharashtra

Century’s Tube Type Metal Marker is a unique marking device for permanent & fade-proof marking on any surface. Its an industrial grade ball-point marker which are bright, opaque & weather-proof. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease. Its made of up of an aluminum tube filled with ink for making smooth and neat markings on any surface. The marker can also write under water. Advantages: Viscous ink makes Permanent, Bright & Opaque Markings on all Surfaces including metals, steel, glass, rubber, wood, concrete etc. Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy & Extremely Rough Surfaces. 60 ml ink content (5-6 times of conventional paint markers) Cheap & effective alternative to paint & brush markings. Ideal for industrial applications like Welding, Dies & Moulds, Automation, Automobile, Construction, Precast Cement Sheets, Maintenance & Repair, Ship Building, Oil & Gas Industry etc. Directs of Use: Open Cap. Hold the marker vertically at 90-degree angle and press the ball to surface to write. Insert the key from the bottom of the tube and roll it up as ink flow reduces. Clean the tip and put the cap back on after each use. Use before 12 months for better result. Drying Time: 30-45 minutes (Touch Dry in 5-7 minutes) Caution: Do not fold the tube back & forth to avoid leakage and breakage. Harmful if swallowed or intentional inhalation. Avoid contact with eyes. Keep away from open flame. Please test before use.

Century’s Cold Marking Chalk is industrial grade chalk for marking on any surface. The chalk has an ergonomic design which makes it easy to hold & write. It can mark on any surface like glass, metal, plastic, concrete, paper, rubber, wood etc. The markings made are bright, fade proof & water-proof. They won’t not chip or peel off easily & are UV resistant. The formulation has a superior marking performance compared to other chalks and works on oily, greasy, smooth, cold, rough & even wet surfaces. Advantages: Ergonomic design & very easy to use Bright, Fade-proof & Water proof markings on any surface Works on oily, wet, smooth & rough surfaces Ideal for temporary markings on metals, plastics, concrete, steel, wood etc Applicable for Welding, Metal Forging & Cutting, Tire Industry & Construction

Century’s Pump-type Metal Marker is unique marking device for permanent & fade-proof marking on any surface. Its an industrial grade ball-point marker which are bright, opaque & weather-proof. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease. Advantages: Viscous ink makes Permanent, Bright & Opaque Markings on all Surfaces including metals, steel, glass, rubber, wood, concrete etc. Hard Aluminum body makes it difficult to break, puncture or leak compared to other tube markers. Rubber valve at bottom makes it very easy to use with continuous ink flow. Zero Wastage compared to Tube type markers. Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy & Extremely Rough Surfaces. 60 ml ink content (5-6 times of conventional paint markers) Direction of use: Remove Cap. For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip. Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow. As pressure reduces, press the rubber valve 2-3 times to continue writing. Do not press the rubber bulb when not in use as it will lead to increase ink pressure. Clean the tip & put the cap back on when after each use. Caution: Harmful if swallowed or intentional inhalation. Avoid contact with eyes. Keep away from open flame. Please test before use.

Century’s Tex Marker is a collapsible aluminum writing device filled with ink used for marking on fabric samples for identification. It is used by textile mills & processing houses before dyeing and finishing processes of grey fabric for identification, quality control, shrinkage, pilferage etc. The marking remain permanent, bright & opaque even after the dyeing & finishing processes are completed. It is widely used in textile industry for dyeing, bleaching, hosiery, knitting, scouring & weaving processes. Advantages: Bright & Opaque markings on all kinds of fabrics including cotton, denims, polyester, wool etc. Permanent, Heat-Proof, Quick drying & No bleeding. Resistance to Acids, Alkalis & other chemical aggressions in finishing processes. Markings can withstand all textile sorting / sizing and finishing processes. Quick identification of lots upon fabrics dyed in dark shades also. Most economical method of marking on gray fabrics before processing. Available in 3 ball-point sizes for different types of fabrics Ink content:  60 ml (70g) Key provided to squeeze out the ink from the marker for optimum utilization & smooth flow. Direction of Use: Open cap. Insert the aluminum key provided with the marker at the bottom end of the tube & start rolling upwards for pressure. Mark on 90 degree angle for smooth ink flow. Keep rolling the key as pressure reduces. Do not fold the tube back & forth as it could lead to puncture. Do not use on other surface other than fabrics. Put the cap back on after use.  

Century’s Everon Marker is a unique marking device used in textile mills & factories for permanent marking on gray cloth & fabrics. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. It is also known as 'pump-type marker' or 'TEXPEN’. The viscous ink makes permanent, bright & opaque markings on all kinds of fabrics and remains visible even after the dyeing & other finishing processes. It works on all kinds of fabrics like cotton, denim, polyester, wool, silk, linen etc. It is widely used in dyeing houses & textile mills in processes like dyeing, scouring, bleaching, hosiery, knitting & weaving. Everon Marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type markers where almost 20% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube. Advantages: Permanent, Bright & Opaque Markings on any fabric. Markings are acid alkali resistant, heat resistant & remain permanent even after dyeing & finishing processes. Hard Aluminium body makes it difficult to break, puncture or leak. Works on all kinds of fabrics including cotton, silk, polyester, wool, denim, linen etc. Rubber Valve at bottom enables smooth & automatic ink flow. Zero Wastage of Ink compared to tube type markers which waste 15-20% ink. Direction of Use: Remove Cap. For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip. Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow. As pressure reduces, press the rubber valve 2-3 times to continue writing. Do not press the rubber bulb when not in use as it will lead to increase ink pressure. Clean the tip & put the cap back on when after each use. Caution: Harmful if swallowed or intentional inhalation. Avoid contact with eyes. Keep away from open flame. Please test before use.