Product / Services
Post Buy Requirement
CM
Cenergy MaxPower Pvt. Ltd.
Mumbai, Maharashtra, India
Add Review
Call Now Call Now

Our Products

  1. Batteries 6 Products available
  2. Inverters 4 Products available
  3. Others 2 Products available

Batteries #5749813

AINO MICRO VRLA AGM Battery

AINO MICRO VRLA AGM Battery
  •   Voltage 6V, 12V
  •   Ah Rating For 6V: 1.3Ah to 14Ah C20.For 12V: 1.0Ah to 70Ah C20. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.8V.
  • Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
  • +ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy
  • -ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy
  • Electrolyte Dilute sulphuric acid (Specific gravity = 1.3)
  • Separator Highly porous glass micro-fibre separator, optimized for low internal resistance, for maximum absorption of the electrolyte, and for electrical separation
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
SALIENT FEATURES

  • Perfect combination of energy storage performance and reliability
  • Grid plate construction of lead calcium tin alloy giving a 5-8 year design life @ 20C
  • Operation at a low internal pressure
  • Low self-discharge rate (< 3% per month @ 20C)
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924
  • Multi-cell design for ease of installation and maintenance

A The terminal voltage for AM-6 models is 6V, while that for AM-12 models is 12V.

B Ah rating is measured @ 25C. Wnd voltage per cell (EVPC) for C1=1.55V, C3=1.70V, C5=1.70V, C10=1.75V, and C20=1.75V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type. 1 means Faston Tab No. 187. 2 means Wire Leads & Plug. 3 means Faston Tab No. 250. 4 means Flag or Insert.

F Actual dimensions may vary by 1%.

BATTERY LIFE

Battery life depends on many factors: the actual use of the product (float or cycle service), the sizing (which in turn affects the depth of discharge), method of charging, and operating temperature.

The float service life is also affected by all the above factors. Additionally, it is also affected by the number of cycles that the battery is subjected to and the depth of discharge during each cycle. The more discharges undergone and the deeper the discharge, the shorter the battery life.

ModelA

Ah RatingB

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C1

C3

C5

C10

C20

 

 

Length

Width

Height

Kg (lb)

AM6-1.3

0.7

0.9

1.0

1.2

1.3

70.0

1

97 (3.82)

24 (0.95)

56 (2.21)

0.30 (0.66)

AM6-2.8

1.7

2.0

2.3

2.6

2.8

35.0

1

66 (2.60)

33 (1.30)

103 (4.06)

0.57 (1.26)

AM6-3.4

2.1

2.5

2.8

3.1

3.2

30.0

1

134 (5.28)

34 (1.34)

65 (2.56)

0.68 (1.50)

AM6-4.0

2.3

2.8

3.1

3.5

4.0

25.0

1

70 (2.76)

47 (1.85)

108 (4.26)

0.75 (1.65)

AM6-4.5

2.7

3.2

3.5

4.0

4.5

20.0

1

70 (2.76)

47 (1.85)

108 (4.26)

0.80 (1.76)

AM6-5

3.0

3.6

3.9

4.5

5.0

18.0

1

70 (2.76)

47 (1.85)

108 (4.26)

0.82 (1.81)

AM6-5HR

3.9

4.2

4.6

5.2

5.0HR

16.0

1

70 (2.76)

47 (1.85)

108 (4.26)

0.85 (1.87)

AM6-7.2

4.3

5.2

5.9

6.6

7.2

15.0

1

151 (5.95)

34 (1.34)

98 (3.86)

1.32 (2.91)

AM6-8.0

4.9

6.2

6.9

8.0

8.5

15.0

1

98 (3.86)

56 (2.21)

118 (4.65)

1.60 (3.53)

AM6-10

7.5

8.2

8.8

9.6

10.0

10.0

1

151 (5.95)

51 (2.01)

98 (3.86)

2.00 (4.41)

AM6-12

9.0

9.6

10.5

11.5

12.0

10.0

1

151 (5.95)

51 (2.01)

98 (3.86)

2.25 (4.96)

AM6-14

10.4

11.1

12.2

13.4

14.0

14.0

1

151 (5.95)

51 (2.01)

98 (3.86)

2.62 (5.78)

AM12-1.0

0.48

0.56

0.65

0.72

0.80

150.0

2

96 (3.78)

25 (0.98)

62 (2.44)

0.35 (0.77)

AM12-1.3

0.9

1.0

1.1

1.2

1.3

100.0

1

97 (3.82)

42 (1.65)

57 (2.26)

0.62 (1.37)

AM12-2.2

1.4

1.6

1.8

2.0

2.2

70.0

1

178 (7.01)

34 (1.34)

66 (2.60)

0.98 (2.16)

AM12-2.8

1.7

2.0

2.2

2.5

2.8

65.0

1

178 (7.01)

34 (1.34)

66 (2.60)

1.24 (2.74)

AM12-3.3

2.2

2.5

2.75

3.2

3.3

60.0

1

134 (5.28)

67 (2.64)

66 (2.60)

1.40 (3.09)

AM12-4.0

2.6

3.0

3.3

3.8

4.0

50.0

1

134 (5.28)

67 (2.64)

66 (2.60)

1.69 (3.74)

AM12-4.5

3.0

3.4

3.7

4.3

4.5

45.0

1

134 (5.28)

67 (2.64)

66 (2.60)

1.90 (4.21)

AM12-5

3.8

4.0

4.5

4.7

5.0

40.0

1

90 (3.55)

70 (2.76)

107 (4.22)

1.83 (4.04)

AM12-5.5

4.1

4.4

4.9

5.1

5.5

35.0

1

90 (3.55)

70 (2.76)

107 (4.22)

2.01 (4.44)

AM12-6.5

4.8

5.1

5.7

6.0

6.5

30.0

1

90 (3.55)

70 (2.76)

107 (4.22)

2.37 (5.24)

AM12-7.2

4.3

5.2

5.9

6.6

7.2

25.0

1

151 (5.95)

65 (2.56)

98 (3.86)

2.60 (5.73)

AM12-7.2HR

5.2

6.0

6.6

7.4

7.2HR

22.0

3

151 (5.95)

65 (2.56)

98 (3.86)

2.65 (5.84)

AM12-8.0

4.7

5.7

6.3

7.3

8.0

23.0

3

151 (5.95)

65 (2.56)

98 (3.86)

2.94 (6.48)

AM12-9.0

5.2

6.4

7.0

8.2

9.0

22.0

3

151 (5.95)

65 (2.56)

98 (3.86)

3.30 (7.29)

AM12-10

7.5

8.2

8.8

9.6

10.0

20.0

3

151 (5.95)

98 (3.86)

100 (3.94)

4.10 (9.04)

AM12-12

9.0

9.6

10.5

11.5

12.0

20.0

3

151 (5.95)

98 (3.86)

100 (3.94)

4.20 (9.26)

AM12-12HR

8.78

10.6

11.2

12.5

12.0HR

18.0

3

151 (5.95)

98 (3.86)

100 (3.94)

4.25 (9.37)

AM12-15

10.0

11.3

12.5

14.2

15.0

16.0

4

181 (7.13)

76 (2.99)

167 (6.58)

5.62 (12.39)

AM12-18

12.0

14.3

15.0

17.0

18.0

14.0

4

181 (7.13)

76 (2.99)

167 (6.58)

5.90 (13.01)

AM12-18HR

13.2

16.1

16.5

18.7

18.0HR

12.0

4

181 (7.13)

76 (2.99)

167 (6.58)

6.00 (13.23)

AM12-20

13.5

16.3

16.8

18.9

20.0

10.0

4

181 (7.13)

76 (2.99)

167 (6.58)

6.20 (13.67)

AM12-22

14.8

17.9

18.4

20.7

22.0

10.0

4

181 (7.13)

76 (2.99)

167 (6.58)

6.82 (15.03)

AM12-26

16.0

20.7

22.5

24.5

26.0

10.0

4

166 (6.54)

175 (6.90)

126 (4.96)

9.20 (20.29)

AM12-28

17.2

21.9

24.2

26.4

28.0

9.0

4

166 (6.54)

175 (6.90)

126 (4.96)

9.40 (20.73)

AM12-40

24.0

29.1

33.1

37.1

40.0

7.5

4

197 (7.76)

165 (6.50)

172 (6.78)

13.50 (29.78)

AM12-44

26.4

32.9

36.3

40.7

44.0

6.0

4

197 (7.76)

165 (6.50)

172 (6.78)

13.80 (30.43)

AM12-50

29.9

37.3

41.2

46.2

50.0

5.8

4

197 (7.76)

165 (6.50)

172 (6.78)

15.67 (34.56)

AM12-70

41.9

49.4

57.6

65.0

70.0

5.4

4

350 (13.79)

168 (6.62)

178 (7.01)

23.99 (52.90)
View Complete Details
Ask Latest Price & Details
Standard VRLA AGM Battery

Standard VRLA AGM Battery
  • Voltage 6V, 12V
  • Ah Rating For 6V:160Ah to 300Ah C10.For 12V:12Ah to 230Ah C10. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.80V.
  • Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
  • +ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy, optimized for high corrosion resistance
  • -ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy, optimized for high corrosion resistance
  • Electrolyte Dilute sulfuric acid (Specific gravity = 1.300)
  • Separator Highly porous glass micro-fibre separator, optimized for low internal resistance, for maximum absorption of the electrolyte, and for electrical separation
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Salient Features
  • Thick positive plate design and high Tin alloy which gives a 10-year design life @ 25C
  • Advanced Pb-Ca-Tin alloy which reduces grid corrosion and increases battery life
  • Operation at a low internal pressure
  • Heavy duty insert copper terminals for ease of assembly, reduced maintenance, and increase safety
  • Over-sized, through-the-partition inter-cell welds which provide low resistance connections, with minimal power loss
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924
  • Multi-cell design for ease of installation and maintenance

A The terminal voltage for ST-6 models is 6V, while that for ST-12 models is 12V.

B Ah rating is measured @ 25C with end voltage per cell (EVPC) = 1.80V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type.

F Actual dimensions may vary by 1%.

Float Voltage

Float Voltage Range

:

2.25 to 2.30 VPC @ 25C

Recommended Float Voltage

:

2.27 VPC @ 25C

Equalize Voltage

:

2.35 VPC for 12 hours

Charging Instructions

Constant voltage charging is recommended.

Temperature compensation to be applied for temperatures ranging from 0C to 40C is as follows: subtract 3mV / C / cell above 25C (add 3mV / C / cell below 25C).

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C5

C8

C10

C12

C20

 

 

 

Length

Width

Height

Kg (lb)

ST-6160

141.0

153.0

160.0

163.0

179.0

4700

2.4

F-M8

298 (11.73)

172 (6.77)

230 (9.05)

26.0 (57.3)

ST-6180

159.0

172.0

180.0

183.0

200.0

4800

2.0

F-M8

306 (12.04)

168 (6.61)

225 (8.85)

28.7 (63.3)

ST-6200

177.0

191.0

200.0

204.0

222.0

5400

1.8

F-M8

320 (12.59)

173 (6.81)

230 (9.05)

31.0 (68.4)

ST-6230

204.0

221.0

230.0

235.0

255.0

5600

1.5

F-M8

323 (12.71)

178 (7.00)

230 (9.05)

33.5 (73.9)

ST-6300

266.0

288.0

300.0

307.0

333.0

6500

1.4

F-M8

295 (11.61)

178 (7.00)

365 (14.37)

47.0 (104.0)

ST-1226

22.9

25.2

26.0

27.0

29.0

1100

8.5

F-M6

174.5 (6.87)

165 (6.50)

125 (4.92)

9.3 (20.5)

ST-1240

35.2

38.4

40.0

40.7

42.6

1600

6.5

F-M6

174 (6.87)

163 (6.41)

154 (6.06)

12.6 (27.7)

ST-1245

39.7

43.3

45.0

45.9

48.0

1800

5.8

F-M6

196 (7.72)

163 (6.42)

174 (6.85)

14.2 (31.3)

ST-1255

48.5

52.9

55.0

56.1

62.1

1900

5.6

F-M6

228 (8.97)

137 (5.39)

215 (8.46)

17.5 (38.6)

ST-1265

57.1

62.5

65.0

66.1

72.0

2000

5.2

F-M6

348 (13.70)

167 (6.57)

178 (7.01)

21.5 (47.4)

ST-1270

61.5

67.3

70.0

71.2

77.5

2100

5.0

F-M6

259 (10.19)

167 (6.57)

215 (8.46)

21.5 (47.4)

ST-1280

70.7

76.9

80.0

81.5

88.7

2400

4.5

F-M6

259 (10.19)

167 (6.57)

215 (8.46)

23.7 (52.3)

ST-12100

88.4

96.3

100.0

101.8

110.8

2700

3.7

F-M6

332 (13.07)

173 (6.81)

215 (8.46)

30.0 (66.0)

ST-12110

97.3

106.0

110.0

112.0

122.0

3000

3.4

F-M6

332 (13.07)

173 (6.81)

215 (8.46)

33.0 (72.6)

ST-12120

107.0

116.0

120.0

134.0

135.0

3300

3.1

F-M6

408 (16.06)

173 (6.81)

227 (8.93)

35.0 (77.2)

ST-12150

133.0

143.0

150.0

153.0

166.0

4200

2.5

F-M8

480(18.89)

170 (6.69)

240 (9.44)

45.0 (99.2)

ST-12160

141.0

153.0

160.0

163.0

179.0

4700

2.0

F-M8

530 (20.86)

209 (8.22)

220 (8.66)

52.2 (115)

ST-12230

204.0

221.0

230.0

235.0

255.0

5900

1.5

F-M8

530 (20.86)

269 (10.59)

215 (8.46)

70.0 (155)
View Complete Details
Ask Latest Price & Details
Deep Cycle VRLA AGM Battery

Deep Cycle VRLA AGM Battery
  • Voltage 6V, 12V
  • Ah Rating For 6V:75Ah to 250Ah C20.For 12V:7Ah to 300Ah C20. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.8V.
  • Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
  • +ve Plate Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance
  • -ve Plate Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance
  • Electrolyte Dilute sulfuric acid
  • Separator Highly porous glass micro-fibre separator, optimized for low internal resistance, for maximum absorption of the electrolyte, and for electrical separation
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Salient Features

  • Thick positive plate design and high Tin alloy which gives a 12-year design life @ 20C
  • Advanced lead tin calcium alloy which reduces grid corrosion and increases battery life
  • Operation at a low internal pressure
  • Heavy duty insert copper terminals for ease of assembly, reduced maintenance, and increase safety
  • Over-sized, through-the-partition inter-cell welds which provide low resistance connections, with minimal power loss
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924
  • Multi-cell design for ease of installation and maintenance

A The terminal voltage for DP-6 models is 6V, while that for DP-12 models is 12V.

B Ah rating is measured @ 25C with end voltage per cell (EVPC) = 1.75V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type.

F Actual dimensions may vary by 1%.

Float Voltage

Float Voltage Range

:

2.25 to 2.30 VPC @ 25C

Recommended Float Voltage

:

2.27 VPC @ 25C

Equalize Voltage

:

2.35 VPC for 12 hours

Charging Instructions

Constant voltage charging is recommended.

Temperature compensation to be applied for temperatures ranging from 0C to 40C is as follows: subtract 3mV / C / cell above 25C (add 3mV / C / cell below 25C).

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C5

C10

C20

C24

C100

 

 

 

Length

Width

Height

Kg (lb)

DP-675

59.7

67.5

75.0

76.4

85.5

1800

3.8

F-M6

185 (7.30)

112 (4.39)

205 (8.06)

11.3 (24.9)

DP-6135

108.0

121.0

135.0

138.0

155.0

3200

3.0

F-M6

195 (7.68)

170 (6.69)

210 (8.27)

16.0 (35.3)

DP-6165

130.0

148.0

165.0

167.0

187.0

4500

2.5

F-M8

260 (10.2)

180 (7.09)

252 (9.92)

25.0 (55.1)

DP-6200

158.0

180.0

200.0

204.0

228.0

4800

2.0

F-M8

306 (12.0)

168 (6.61)

225 (8.86)

28.0 (61.7)

DP-6230

181.0

206.0

230.0

233.0

260.0

5000

1.8

F-M8

322 (12.7)

178 (7.01)

230 (9.06)

31.0 (68.3)

DP-6250

197.0

224.0

250.0

253.0

283.0

5600

1.5

F-M8

243 (9.57)

187 (7.36)

275 (10.8)

33.5 (73.9)

DP-1207

5.6

6.4

7.2

7.1

7.9

245

35.6

F-M6

151 (5.95)

65 (2.56)

98 (3.86)

2.3 (5.1)

DP-1212

9.4

10.7

12.0

11.7

13.2

450

21.3

F-M6

151 (5.95)

98 (3.86)

100 (3.94)

3.7 (8.1)

DP-1215

11.8

13.4

15.0

14.7

16.5

572

16.9

F-M6

151 (5.95)

98 (3.86)

100 (3.94)

4.6 (10.1)

DP-1220

15.1

17.3

20.0

19.6

22.0

818

12.9

F-M6

195 (7.68)

130 (5.12)

165 (6.50)

6.2 (13.7)

DP-1226

19.7

22.5

26.0

25.6

28.6

1182

8.9

F-M6

195 (7.68)

130 (5.12)

165 (6.50)

8.2 (18.1)

DP-1228

21.2

24.2

28.0

27.5

30.8

1195

8.5

F-M6

195 (7.68)

130 (5.12)

165 (6.50)

8.5 (18.7)

DP-1235

26.5

30.3

35.0

34.4

38.5

1500

7.0

F-M6

195 (7.68)

130 (5.12)

165 (6.50)

10.9 (24.0)

DP-1240

31.5

35.8

40.0

40.8

44.0

1700

6.0

F-M6

197 (7.76)

165 (6.50)

172 (6.78)

13.8 (30.4)

DP-1250

39.6

45.0

50.0

50.9

57.0

1750

5.9

F-M8

197 (7.76)

165 (6.50)

172 (6.78)

14.8 (32.6)

DP-1260

47.5

53.9

60.0

61.0

68.3

1900

5.6

F-M8

350 (13.8)

168 (6.62)

178 (7.01)

18.0 (39.7)

DP-1270

55.5

63.0

70.0

71.1

79.6

2000

5.2

F-M8

350 (13.8)

168 (6.62)

178 (7.01)

22.0 (48.5)

DP-1280

63.5

72.0

80.0

81.1

91.2

2100

5.0

F-M8

259 (10.2)

168 (6.62)

215 (8.50)

23.0 (50.7)

DP-1290

71.3

80.8

90.0

90.9

101.0

2400

4.5

F-M8

259 (10.2)

168 (6.62)

215 (8.50)

26.5 (58.4)

DP-12100

79.0

90.4

100.0

102.0

114.0

2650

4.0

F-M8

305 (12.0)

168 (6.62)

215 (8.50)

30.0 (66.1)

DP-12110

86.9

98.7

110.0

113.0

126.0

2900

3.5

F-M8

305 (12.0)

168 (6.62)

215 (8.50)

31.5 (69.4)

DP-12120

96.4

108.0

120.0

123.0

138.0

3000

3.4

F-M8

332 (13.1)

174 (6.86)

220 (8.67)

33.0 (72.8)

DP-12135

107.0

121.0

135.0

137.0

153.0

3300

3.1

F-M8

408 (16.1)

175 (6.90)

230 (9.06)

35.0 (77.2)

DP-12150

119.0

134.0

150.0

152.0

170.0

3750

2.7

F-M8

340 (13.4)

173 (6.81)

288 (11.3)

39.6 (87.3)

DP-12165

131.0

148.0

165.0

167.0

187.0

4200

2.5

F-M8

480 (18.9)

170 (6.70)

240 (9.45)

45.0 (99.2)

DP-12180

142.0

162.0

180.0

183.0

205.0

4700

2.0

F-M8

530 (20.9)

209 (8.23)

220 (8.67)

54.0 (119.0)

DP-12200

158.0

180.0

200.0

204.0

228.0

5400

1.8

F-M8

520 (20.5)

238 (9.37)

220 (8.67)

60.5 (133.0)

DP-12230

181.0

206.0

230.0

233.0

260.0

5400

1.8

F-M8

520 (20.5)

238 (9.37)

220 (8.67)

64.0 (141.0)

DP-12250

197.0

225.0

250.0

253.0

283.0

5900

1.5

F-M8

520 (20.5)

269 (10.6)

210 (8.27)

66.5 (147.0)

DP-12280

220.0

252.0

280.0

283.0

317.0

6100

1.5

F-M8

520 (20.5)

269 (10.6)

210 (8.27)

69.5 (153.0)

DP-12300

236.0

270.0

300.0

303.0

340.0

6300

1.2

F-M8

520 (20.5)

269 (10.6)

225 (8.86)

76.0 (168.0)
View Complete Details
Ask Latest Price & Details
Modular Max VRLA Battery

Modular Max VRLA Battery
  • Voltage 2V
  • Ah Rating 150Ah to 3000Ah C10. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.8V.
  • Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
  • +ve Plate Flat pasted grid, 0.245” thick, made of Pb-Ca-Tin alloy, to minimize corrosion and prolong life
  • -ve Plate Flat pasted grid, made of Pb-Ca alloy, balanced to optimize recombination efficiency
  • Electrolyte Dilute sulphuric acid (Specific gravity = 1.3)
  • Separator Micro porous glass fibre, which is mechanically strong, has low electrical resistance, and absorbs the electrolyte completely into its structure
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Salient Features

  • Super thick +ve plates minimize corrosion and prolong life
  • Balanced lead-calcium -ve plates optimize recombination efficiency
  • Thermally welded case-to-cover bond for eliminating leakage
  • Single-piece container construction
  • Lead casting terminal, threaded copper insert with large surface area to provide maximum conductivity
  • Welded/epoxy, dual post sealed design provides the highest integrity seal in the industry
  • Large copper post design also enhances the high rate performance
  • Ring burn with secondary epoxy resin seal is 100% water bath tested in the factory and proven in service
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924

A The terminal voltage for all models is 2V.

B Ah rating is measured @ 25C with end voltage per cell (EVPC) = 1.75V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type.

F Actual dimensions may vary by 1%.

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C5

C8

C10

C12

C24

 

 

 

Length

Width

Height

Kg (lb)

2-150Max

135

152

158

161

175

1205

0.55

F-M8

90 (3.54)

181 (7.13)

365 (14.4)

12.5 (27.6)

2-200Max

180

202

210

214

233

1620

0.50

F-M8

90 (3.54)

181 (7.13)

365 (14.4)

13.7 (30.2)

2-300Max

269

304

313

319

348

2410

0.40

F-M8

124 (4.88)

181 (7.13)

365 (14.4)

19.2 (42.3)

2-400Max

359

405

420

425

466

3220

0.36

F-M6

158 (6.22)

181 (7.13)

365 (14.4)

25.0 (55.1)

2-500Max

449

506

522

533

581

4100

0.30

F-M8

191 (7.52)

181 (7.13)

365 (14.4)

30.5 (67.2)

2-600Max

540

607

626

638

698

4860

0.28

F-M8

225 (8.86)

181 (7.13)

365 (14.4)

35.5 (78.3)

2-800Max

720

810

835

852

931

6400

0.20

F-M8

303 (11.9)

181 (7.13)

365 (14.4)

48.0 (106.0)

2-1000Max

897

1012

1040

1064

1164

7900

0.16

F-M8

370 (14.6)

181 (7.13)

365 (14.4)

61.0 (134.0)

2-1600Max

1435

1616

1660

1704

1855

13200

0.11

F-M8

318 (12.5)

363 (14.3)

388 (15.3)

100.0 (220.0)

2-2000Max

1795

2024

2090

2124

2326

16200

0.09

F-M8

385 (15.2)

363 (14.3)

388 (15.3)

125.0 (276.0)

2-3000Max

2690

3040

3130

3192

3480

24200

0.08

F-M8

568 (22.4)

363 (14.3)

388 (15.3)

185.0 (408.0)
View Complete Details
Ask Latest Price & Details
Modular VRLA Gel Battery

Modular VRLA Gel Battery
  • Voltage 2V
  • Ah Rating 50Ah to 4000Ah C10. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.80V.
  • Technology Valve Regulated Lead Acid (VRLA) with sulphuric acid thixotropic gel (specific gravity = 1.28) as separator
  • +ve Plate Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance
  • -ve Plate Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance
  • Electrolyte Dilute sulfuric acid
  • Separator Micro porous and robust, for electrical separation of the +ve and -ve plates, and optimized for low internal resistance
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Salient Features

  • Advanced Pb-Ca-Tnalloy which reduces grid corrosion and increases battery life
  • Thick +ve plate technology for maximum service float life and a design life of 18 years @ 20C
  • Separator manufactured using the latest German technology
  • Base material is a microporousduroplastic exhibiting excellent high temperature stability and mechanical strength, resulting in very good resistance to vibration and mechanical shock
  • Silver plated integral copper insert
  • Operation at a low internal pressure
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924

Cenergy MaxPower Energy Storage & Solar Products Energy Storage Products VRLA Batteries VRLA Gel Batteries Modular VRLA Gel Battery
Modular VRLA Gel Battery

Brochure

Download the brochure for this product.

FAQs

Read the FAQs related to this product.

Contact Sales

Contact the sales team to buy this product.

Overview

Voltage

2V

Ah Rating

50Ah to 4000Ah C10. Ah rating is @25C, with end voltage per cell (EVPC) = 1.80V.

Technology

Valve Regulated Lead Acid (VRLA) with sulphuric acid thixotropic gel (specific gravity = 1.28) as separator

+ve Plate

Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance

-ve Plate

Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance

Electrolyte

Dilute sulfuric acid

Separator

Micro porous and robust, for electrical separation of the +ve and -ve plates, and optimized for low internal resistance

Container

Standard: Reinforced ABS (UL94HB) container and cover

Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%

Salient Features

  • Advanced Pb-Ca-Tnalloy which reduces grid corrosion and increases battery life
  • Thick +ve plate technology for maximum service float life and a design life of 18 years @ 20C
  • Separator manufactured using the latest German technology
  • Base material is a microporousduroplastic exhibiting excellent high temperature stability and mechanical strength, resulting in very good resistance to vibration and mechanical shock
  • Silver plated integral copper insert
  • Operation at a low internal pressure
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924

Product Specifications

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

C5

C10

C24

C48

C100

Length

Width

Height

Kg (lb)

2-50

42

50

56

58

62

420

2.10

ST1

161 (6.34)

50 (1.97)

172 (6.78)

4.5 (9.9)

2-100

84

100

111

115

123

890

2.00

ST1

171 (6.74)

72 (2.83)

211 (8.31)

8 (17.6)

2-120

101

120

134

138

148

150

1.80

ST1

171 (6.74)

72 (2.83)

211 (8.31)

9 (19.8)

2-150

126

150

167

172

185

1280

1.50

ST1

171 (6.74)

102 (4.02)

211 (8.31)

11 (24.3)

2-200

168

200

223

230

246

1320

0.50

ST2

171 (6.74)

106 (4.18)

336 (13.2)

15 (33.1)

2-250

210

250

278

288

308

1660

0.45

ST2

171 (6.74)

106 (4.18)

336 (13.2)

18 (39.7)

2-300

252

300

336

345

369

1990

0.40

ST2

171 (6.74)

151 (5.95)

336 (13.2)

21 (46.2)

2-400

336

400

446

460

500

2660

0.36

ST2

210 (8.27)

173 (6.82)

336 (13.2)

28 (61.7)

2-500

420

500

559

576

615

3320

0.30

ST2

241 (9.50)

171 (6.74)

336 (13.2)

33 (72.8)

2-600

505

600

672

691

738

3980

0.28

ST2

302 (11.9)

175 (6.90)

336 (13.2)

42 (92.6)

2-700

590

660

720

806

861

4850

0.22

ST2

302 (11.9)

175 (6.90)

336 (13.2)

50 (110)

2-800

670

800

890

922

984

5300

0.20

ST2

410 (16.2)

175 (6.90)

336 (13.2)

57 (126)

2-1000

840

1000

1114

1152

1230

6550

0.16

ST2

482 (19.0)

175 (6.90)

336 (13.2)

66 (146)

2-1250

1052

1250

1393

1440

1542

8200

0.13

ST2

482 (19.0)

175 (6.90)

336 (13.2)

70 (154)

2-1500

1260

1500

1670

1723

1850

9920

0.11

ST2

400 (15.8)

350 (13.8)

351 (13.8)

100 (220)

2-1800

1510

1800

2004

2069

2220

12300

0.10

ST2

490 (19.3)

350 (13.8)

351 (13.8)

120 (265)

2-2000

1680

2000

2227

2299

2460

13400

0.09

ST2

490 (19.3)

350 (13.8)

351 (13.8)

132 (291)

2-2500

2100

2500

2784

2875

3080

16540

0.08

ST2

490 (19.3)

350 (13.8)

351 (13.8)

175 (386)

2-3000

2520

3000

3336

3451

3690

19980

0.08

ST2

710 (27.2)

350 (13.8)

351 (13.8)

210 (463)

2-4000

3360

4000

4464

4598

4920

27500

0.06

ST2

710 (27.2)

350 (13.8)

351 (13.8)

261 (576)

A The terminal voltage for all models is 2V.

B Ah rating is measured @ 25C with end voltage per cell (EVPC) = 1.80V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type.

F Actual dimensions may vary by 1%.

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C5

C10

C24

C48

C100

 

 

 

Length

Width

Height

Kg (lb)

2-50

42

50

56

58

62

420

2.10

ST1

161 (6.34)

50 (1.97)

172 (6.78)

4.5 (9.9)

2-100

84

100

111

115

123

890

2.00

ST1

171 (6.74)

72 (2.83)

211 (8.31)

8 (17.6)

2-120

101

120

134

138

148

150

1.80

ST1

171 (6.74)

72 (2.83)

211 (8.31)

9 (19.8)

2-150

126

150

167

172

185

1280

1.50

ST1

171 (6.74)

102 (4.02)

211 (8.31)

11 (24.3)

2-200

168

200

223

230

246

1320

0.50

ST2

171 (6.74)

106 (4.18)

336 (13.2)

15 (33.1)

2-250

210

250

278

288

308

1660

0.45

ST2

171 (6.74)

106 (4.18)

336 (13.2)

18 (39.7)

2-300

252

300

336

345

369

1990

0.40

ST2

171 (6.74)

151 (5.95)

336 (13.2)

21 (46.2)

2-400

336

400

446

460

500

2660

0.36

ST2

210 (8.27)

173 (6.82)

336 (13.2)

28 (61.7)

2-500

420

500

559

576

615

3320

0.30

ST2

241 (9.50)

171 (6.74)

336 (13.2)

33 (72.8)

2-600

505

600

672

691

738

3980

0.28

ST2

302 (11.9)

175 (6.90)

336 (13.2)

42 (92.6)

2-700

590

660

720

806

861

4850

0.22

ST2

302 (11.9)

175 (6.90)

336 (13.2)

50 (110)

2-800

670

800

890

922

984

5300

0.20

ST2

410 (16.2)

175 (6.90)

336 (13.2)

57 (126)

2-1000

840

1000

1114

1152

1230

6550

0.16

ST2

482 (19.0)

175 (6.90)

336 (13.2)

66 (146)

2-1250

1052

1250

1393

1440

1542

8200

0.13

ST2

482 (19.0)

175 (6.90)

336 (13.2)

70 (154)

2-1500

1260

1500

1670

1723

1850

9920

0.11

ST2

400 (15.8)

350 (13.8)

351 (13.8)

100 (220)

2-1800

1510

1800

2004

2069

2220

12300

0.10

ST2

490 (19.3)

350 (13.8)

351 (13.8)

120 (265)

2-2000

1680

2000

2227

2299

2460

13400

0.09

ST2

490 (19.3)

350 (13.8)

351 (13.8)

132 (291)

2-2500

2100

2500

2784

2875

3080

16540

0.08

ST2

490 (19.3)

350 (13.8)

351 (13.8)

175 (386)

2-3000

2520

3000

3336

3451

3690

19980

0.08

ST2

710 (27.2)

350 (13.8)

351 (13.8)

210 (463)

2-4000

3360

4000

4464

4598

4920

27500

0.06

ST2

710 (27.2)

350 (13.8)

351 (13.8)

261 (576)
View Complete Details
Ask Latest Price & Details
Tubular Eco Battery

Tubular Eco Battery
  • Technology Flooded lead acid with diluted sulphuric acid as electrolyte (dN = 1.25 kg/l)
  • +ve Plate Type Tubular, made of low-antimony lead selenium alloy
  • -ve Plate Type Flat, made of lead selenium alloy
  • Container Standard: Reinforced PP Optional: Flame retardant
  • Voltage Level 6V, 12V
  • AH rating 180 Ah to 280 Ah @ C20 for 6V 28 Ah to 300 Ah @ C20 for 12V
  • Applicable Operating Temperature Range -40˚C (-104˚F) to +60˚C (+140˚F)
  • Ideal Operating Temperature Range +20˚C (+68˚F) to +25˚C (+77˚F)
  • Storage time from a fully charged condition 12 months @ +20˚C (+68˚F). At higher temperatures, the time interval is shorter.

Tubular OPzS Eco flooded lead acid batteries are distinguished by their economical design, lead selenium tubular plate design, and their high tolerance to cycling. They provide the best possible compromise in lead acid plate technology. They can be used for general purpose applications, but can also be used for solar/wind and other deep discharge applications.

Salient Features

  • Robust tubular +ve plates consisting of a low-antimony lead selenium alloy
  • Microporous, corrugated, and robust separators for electrical separation of the +ve and ve plates, optimized for low internal resistance
  • Very high operational reliability in rough operating conditions
  • Low maintenance due to reduced antimony in the alloy and high electrolyte reserve
  • Flame retardant ceramic plugs that filter out any drops of electrolyte from the escaping gases preventing any errant spark or flame from entering the battery
  • Low gassing due to PbSbSnSe alloy (en 50272-2)
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.
Retailer of Batteries from Mumbai, Maharashtra by Cenergy MaxPower Pvt. Ltd.
Product / Services
Post Buy Requirement
CM

Cenergy MaxPower Pvt. Ltd.
Andheri East, Mumbai, Maharashtra

Add Review
Call Now Call Now

Our Products

  1. Batteries 6 Products available
  2. Inverters 4 Products available

  3. Solar Charge Controller

    1 Products available
  4. Others Products 1 Products available

Batteries

We offer a complete product range of AINO MICRO VRLA AGM Battery, Standard VRLA AGM Battery, Deep Cycle VRLA AGM Battery, Modular Max VRLA Battery and Modular VRLA Gel Battery

AINO MICRO VRLA AGM Battery

AINO MICRO VRLA AGM Battery
  •   Voltage 6V, 12V
  •   Ah Rating For 6V: 1.3Ah to 14Ah C20.For 12V: 1.0Ah to 70Ah C20. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.8V.
  • Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
  • +ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy
  • -ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy
  • Electrolyte Dilute sulphuric acid (Specific gravity = 1.3)
  • Separator Highly porous glass micro-fibre separator, optimized for low internal resistance, for maximum absorption of the electrolyte, and for electrical separation
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
SALIENT FEATURES

  • Perfect combination of energy storage performance and reliability
  • Grid plate construction of lead calcium tin alloy giving a 5-8 year design life @ 20C
  • Operation at a low internal pressure
  • Low self-discharge rate (< 3% per month @ 20C)
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924
  • Multi-cell design for ease of installation and maintenance

A The terminal voltage for AM-6 models is 6V, while that for AM-12 models is 12V.

B Ah rating is measured @ 25C. Wnd voltage per cell (EVPC) for C1=1.55V, C3=1.70V, C5=1.70V, C10=1.75V, and C20=1.75V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type. 1 means Faston Tab No. 187. 2 means Wire Leads & Plug. 3 means Faston Tab No. 250. 4 means Flag or Insert.

F Actual dimensions may vary by 1%.

BATTERY LIFE

Battery life depends on many factors: the actual use of the product (float or cycle service), the sizing (which in turn affects the depth of discharge), method of charging, and operating temperature.

The float service life is also affected by all the above factors. Additionally, it is also affected by the number of cycles that the battery is subjected to and the depth of discharge during each cycle. The more discharges undergone and the deeper the discharge, the shorter the battery life.

ModelA

Ah RatingB

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C1

C3

C5

C10

C20

 

 

Length

Width

Height

Kg (lb)

AM6-1.3

0.7

0.9

1.0

1.2

1.3

70.0

1

97 (3.82)

24 (0.95)

56 (2.21)

0.30 (0.66)

AM6-2.8

1.7

2.0

2.3

2.6

2.8

35.0

1

66 (2.60)

33 (1.30)

103 (4.06)

0.57 (1.26)

AM6-3.4

2.1

2.5

2.8

3.1

3.2

30.0

1

134 (5.28)

34 (1.34)

65 (2.56)

0.68 (1.50)

AM6-4.0

2.3

2.8

3.1

3.5

4.0

25.0

1

70 (2.76)

47 (1.85)

108 (4.26)

0.75 (1.65)

AM6-4.5

2.7

3.2

3.5

4.0

4.5

20.0

1

70 (2.76)

47 (1.85)

108 (4.26)

0.80 (1.76)

AM6-5

3.0

3.6

3.9

4.5

5.0

18.0

1

70 (2.76)

47 (1.85)

108 (4.26)

0.82 (1.81)

AM6-5HR

3.9

4.2

4.6

5.2

5.0HR

16.0

1

70 (2.76)

47 (1.85)

108 (4.26)

0.85 (1.87)

AM6-7.2

4.3

5.2

5.9

6.6

7.2

15.0

1

151 (5.95)

34 (1.34)

98 (3.86)

1.32 (2.91)

AM6-8.0

4.9

6.2

6.9

8.0

8.5

15.0

1

98 (3.86)

56 (2.21)

118 (4.65)

1.60 (3.53)

AM6-10

7.5

8.2

8.8

9.6

10.0

10.0

1

151 (5.95)

51 (2.01)

98 (3.86)

2.00 (4.41)

AM6-12

9.0

9.6

10.5

11.5

12.0

10.0

1

151 (5.95)

51 (2.01)

98 (3.86)

2.25 (4.96)

AM6-14

10.4

11.1

12.2

13.4

14.0

14.0

1

151 (5.95)

51 (2.01)

98 (3.86)

2.62 (5.78)

AM12-1.0

0.48

0.56

0.65

0.72

0.80

150.0

2

96 (3.78)

25 (0.98)

62 (2.44)

0.35 (0.77)

AM12-1.3

0.9

1.0

1.1

1.2

1.3

100.0

1

97 (3.82)

42 (1.65)

57 (2.26)

0.62 (1.37)

AM12-2.2

1.4

1.6

1.8

2.0

2.2

70.0

1

178 (7.01)

34 (1.34)

66 (2.60)

0.98 (2.16)

AM12-2.8

1.7

2.0

2.2

2.5

2.8

65.0

1

178 (7.01)

34 (1.34)

66 (2.60)

1.24 (2.74)

AM12-3.3

2.2

2.5

2.75

3.2

3.3

60.0

1

134 (5.28)

67 (2.64)

66 (2.60)

1.40 (3.09)

AM12-4.0

2.6

3.0

3.3

3.8

4.0

50.0

1

134 (5.28)

67 (2.64)

66 (2.60)

1.69 (3.74)

AM12-4.5

3.0

3.4

3.7

4.3

4.5

45.0

1

134 (5.28)

67 (2.64)

66 (2.60)

1.90 (4.21)

AM12-5

3.8

4.0

4.5

4.7

5.0

40.0

1

90 (3.55)

70 (2.76)

107 (4.22)

1.83 (4.04)

AM12-5.5

4.1

4.4

4.9

5.1

5.5

35.0

1

90 (3.55)

70 (2.76)

107 (4.22)

2.01 (4.44)

AM12-6.5

4.8

5.1

5.7

6.0

6.5

30.0

1

90 (3.55)

70 (2.76)

107 (4.22)

2.37 (5.24)

AM12-7.2

4.3

5.2

5.9

6.6

7.2

25.0

1

151 (5.95)

65 (2.56)

98 (3.86)

2.60 (5.73)

AM12-7.2HR

5.2

6.0

6.6

7.4

7.2HR

22.0

3

151 (5.95)

65 (2.56)

98 (3.86)

2.65 (5.84)

AM12-8.0

4.7

5.7

6.3

7.3

8.0

23.0

3

151 (5.95)

65 (2.56)

98 (3.86)

2.94 (6.48)

AM12-9.0

5.2

6.4

7.0

8.2

9.0

22.0

3

151 (5.95)

65 (2.56)

98 (3.86)

3.30 (7.29)

AM12-10

7.5

8.2

8.8

9.6

10.0

20.0

3

151 (5.95)

98 (3.86)

100 (3.94)

4.10 (9.04)

AM12-12

9.0

9.6

10.5

11.5

12.0

20.0

3

151 (5.95)

98 (3.86)

100 (3.94)

4.20 (9.26)

AM12-12HR

8.78

10.6

11.2

12.5

12.0HR

18.0

3

151 (5.95)

98 (3.86)

100 (3.94)

4.25 (9.37)

AM12-15

10.0

11.3

12.5

14.2

15.0

16.0

4

181 (7.13)

76 (2.99)

167 (6.58)

5.62 (12.39)

AM12-18

12.0

14.3

15.0

17.0

18.0

14.0

4

181 (7.13)

76 (2.99)

167 (6.58)

5.90 (13.01)

AM12-18HR

13.2

16.1

16.5

18.7

18.0HR

12.0

4

181 (7.13)

76 (2.99)

167 (6.58)

6.00 (13.23)

AM12-20

13.5

16.3

16.8

18.9

20.0

10.0

4

181 (7.13)

76 (2.99)

167 (6.58)

6.20 (13.67)

AM12-22

14.8

17.9

18.4

20.7

22.0

10.0

4

181 (7.13)

76 (2.99)

167 (6.58)

6.82 (15.03)

AM12-26

16.0

20.7

22.5

24.5

26.0

10.0

4

166 (6.54)

175 (6.90)

126 (4.96)

9.20 (20.29)

AM12-28

17.2

21.9

24.2

26.4

28.0

9.0

4

166 (6.54)

175 (6.90)

126 (4.96)

9.40 (20.73)

AM12-40

24.0

29.1

33.1

37.1

40.0

7.5

4

197 (7.76)

165 (6.50)

172 (6.78)

13.50 (29.78)

AM12-44

26.4

32.9

36.3

40.7

44.0

6.0

4

197 (7.76)

165 (6.50)

172 (6.78)

13.80 (30.43)

AM12-50

29.9

37.3

41.2

46.2

50.0

5.8

4

197 (7.76)

165 (6.50)

172 (6.78)

15.67 (34.56)

AM12-70

41.9

49.4

57.6

65.0

70.0

5.4

4

350 (13.79)

168 (6.62)

178 (7.01)

23.99 (52.90)
View Complete Details
Ask Latest Price & Details
Standard VRLA AGM Battery

Standard VRLA AGM Battery
  • Voltage 6V, 12V
  • Ah Rating For 6V:160Ah to 300Ah C10.For 12V:12Ah to 230Ah C10. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.80V.
  • Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
  • +ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy, optimized for high corrosion resistance
  • -ve Plate Flat pasted grid, made of Pb-Ca-Tin alloy, optimized for high corrosion resistance
  • Electrolyte Dilute sulfuric acid (Specific gravity = 1.300)
  • Separator Highly porous glass micro-fibre separator, optimized for low internal resistance, for maximum absorption of the electrolyte, and for electrical separation
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Salient Features
  • Thick positive plate design and high Tin alloy which gives a 10-year design life @ 25C
  • Advanced Pb-Ca-Tin alloy which reduces grid corrosion and increases battery life
  • Operation at a low internal pressure
  • Heavy duty insert copper terminals for ease of assembly, reduced maintenance, and increase safety
  • Over-sized, through-the-partition inter-cell welds which provide low resistance connections, with minimal power loss
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924
  • Multi-cell design for ease of installation and maintenance

A The terminal voltage for ST-6 models is 6V, while that for ST-12 models is 12V.

B Ah rating is measured @ 25C with end voltage per cell (EVPC) = 1.80V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type.

F Actual dimensions may vary by 1%.

Float Voltage

Float Voltage Range

:

2.25 to 2.30 VPC @ 25C

Recommended Float Voltage

:

2.27 VPC @ 25C

Equalize Voltage

:

2.35 VPC for 12 hours

Charging Instructions

Constant voltage charging is recommended.

Temperature compensation to be applied for temperatures ranging from 0C to 40C is as follows: subtract 3mV / C / cell above 25C (add 3mV / C / cell below 25C).

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C5

C8

C10

C12

C20

 

 

 

Length

Width

Height

Kg (lb)

ST-6160

141.0

153.0

160.0

163.0

179.0

4700

2.4

F-M8

298 (11.73)

172 (6.77)

230 (9.05)

26.0 (57.3)

ST-6180

159.0

172.0

180.0

183.0

200.0

4800

2.0

F-M8

306 (12.04)

168 (6.61)

225 (8.85)

28.7 (63.3)

ST-6200

177.0

191.0

200.0

204.0

222.0

5400

1.8

F-M8

320 (12.59)

173 (6.81)

230 (9.05)

31.0 (68.4)

ST-6230

204.0

221.0

230.0

235.0

255.0

5600

1.5

F-M8

323 (12.71)

178 (7.00)

230 (9.05)

33.5 (73.9)

ST-6300

266.0

288.0

300.0

307.0

333.0

6500

1.4

F-M8

295 (11.61)

178 (7.00)

365 (14.37)

47.0 (104.0)

ST-1226

22.9

25.2

26.0

27.0

29.0

1100

8.5

F-M6

174.5 (6.87)

165 (6.50)

125 (4.92)

9.3 (20.5)

ST-1240

35.2

38.4

40.0

40.7

42.6

1600

6.5

F-M6

174 (6.87)

163 (6.41)

154 (6.06)

12.6 (27.7)

ST-1245

39.7

43.3

45.0

45.9

48.0

1800

5.8

F-M6

196 (7.72)

163 (6.42)

174 (6.85)

14.2 (31.3)

ST-1255

48.5

52.9

55.0

56.1

62.1

1900

5.6

F-M6

228 (8.97)

137 (5.39)

215 (8.46)

17.5 (38.6)

ST-1265

57.1

62.5

65.0

66.1

72.0

2000

5.2

F-M6

348 (13.70)

167 (6.57)

178 (7.01)

21.5 (47.4)

ST-1270

61.5

67.3

70.0

71.2

77.5

2100

5.0

F-M6

259 (10.19)

167 (6.57)

215 (8.46)

21.5 (47.4)

ST-1280

70.7

76.9

80.0

81.5

88.7

2400

4.5

F-M6

259 (10.19)

167 (6.57)

215 (8.46)

23.7 (52.3)

ST-12100

88.4

96.3

100.0

101.8

110.8

2700

3.7

F-M6

332 (13.07)

173 (6.81)

215 (8.46)

30.0 (66.0)

ST-12110

97.3

106.0

110.0

112.0

122.0

3000

3.4

F-M6

332 (13.07)

173 (6.81)

215 (8.46)

33.0 (72.6)

ST-12120

107.0

116.0

120.0

134.0

135.0

3300

3.1

F-M6

408 (16.06)

173 (6.81)

227 (8.93)

35.0 (77.2)

ST-12150

133.0

143.0

150.0

153.0

166.0

4200

2.5

F-M8

480(18.89)

170 (6.69)

240 (9.44)

45.0 (99.2)

ST-12160

141.0

153.0

160.0

163.0

179.0

4700

2.0

F-M8

530 (20.86)

209 (8.22)

220 (8.66)

52.2 (115)

ST-12230

204.0

221.0

230.0

235.0

255.0

5900

1.5

F-M8

530 (20.86)

269 (10.59)

215 (8.46)

70.0 (155)
View Complete Details
Ask Latest Price & Details
Deep Cycle VRLA AGM Battery

Deep Cycle VRLA AGM Battery
  • Voltage 6V, 12V
  • Ah Rating For 6V:75Ah to 250Ah C20.For 12V:7Ah to 300Ah C20. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.8V.
  • Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
  • +ve Plate Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance
  • -ve Plate Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance
  • Electrolyte Dilute sulfuric acid
  • Separator Highly porous glass micro-fibre separator, optimized for low internal resistance, for maximum absorption of the electrolyte, and for electrical separation
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Salient Features

  • Thick positive plate design and high Tin alloy which gives a 12-year design life @ 20C
  • Advanced lead tin calcium alloy which reduces grid corrosion and increases battery life
  • Operation at a low internal pressure
  • Heavy duty insert copper terminals for ease of assembly, reduced maintenance, and increase safety
  • Over-sized, through-the-partition inter-cell welds which provide low resistance connections, with minimal power loss
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924
  • Multi-cell design for ease of installation and maintenance

A The terminal voltage for DP-6 models is 6V, while that for DP-12 models is 12V.

B Ah rating is measured @ 25C with end voltage per cell (EVPC) = 1.75V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type.

F Actual dimensions may vary by 1%.

Float Voltage

Float Voltage Range

:

2.25 to 2.30 VPC @ 25C

Recommended Float Voltage

:

2.27 VPC @ 25C

Equalize Voltage

:

2.35 VPC for 12 hours

Charging Instructions

Constant voltage charging is recommended.

Temperature compensation to be applied for temperatures ranging from 0C to 40C is as follows: subtract 3mV / C / cell above 25C (add 3mV / C / cell below 25C).

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C5

C10

C20

C24

C100

 

 

 

Length

Width

Height

Kg (lb)

DP-675

59.7

67.5

75.0

76.4

85.5

1800

3.8

F-M6

185 (7.30)

112 (4.39)

205 (8.06)

11.3 (24.9)

DP-6135

108.0

121.0

135.0

138.0

155.0

3200

3.0

F-M6

195 (7.68)

170 (6.69)

210 (8.27)

16.0 (35.3)

DP-6165

130.0

148.0

165.0

167.0

187.0

4500

2.5

F-M8

260 (10.2)

180 (7.09)

252 (9.92)

25.0 (55.1)

DP-6200

158.0

180.0

200.0

204.0

228.0

4800

2.0

F-M8

306 (12.0)

168 (6.61)

225 (8.86)

28.0 (61.7)

DP-6230

181.0

206.0

230.0

233.0

260.0

5000

1.8

F-M8

322 (12.7)

178 (7.01)

230 (9.06)

31.0 (68.3)

DP-6250

197.0

224.0

250.0

253.0

283.0

5600

1.5

F-M8

243 (9.57)

187 (7.36)

275 (10.8)

33.5 (73.9)

DP-1207

5.6

6.4

7.2

7.1

7.9

245

35.6

F-M6

151 (5.95)

65 (2.56)

98 (3.86)

2.3 (5.1)

DP-1212

9.4

10.7

12.0

11.7

13.2

450

21.3

F-M6

151 (5.95)

98 (3.86)

100 (3.94)

3.7 (8.1)

DP-1215

11.8

13.4

15.0

14.7

16.5

572

16.9

F-M6

151 (5.95)

98 (3.86)

100 (3.94)

4.6 (10.1)

DP-1220

15.1

17.3

20.0

19.6

22.0

818

12.9

F-M6

195 (7.68)

130 (5.12)

165 (6.50)

6.2 (13.7)

DP-1226

19.7

22.5

26.0

25.6

28.6

1182

8.9

F-M6

195 (7.68)

130 (5.12)

165 (6.50)

8.2 (18.1)

DP-1228

21.2

24.2

28.0

27.5

30.8

1195

8.5

F-M6

195 (7.68)

130 (5.12)

165 (6.50)

8.5 (18.7)

DP-1235

26.5

30.3

35.0

34.4

38.5

1500

7.0

F-M6

195 (7.68)

130 (5.12)

165 (6.50)

10.9 (24.0)

DP-1240

31.5

35.8

40.0

40.8

44.0

1700

6.0

F-M6

197 (7.76)

165 (6.50)

172 (6.78)

13.8 (30.4)

DP-1250

39.6

45.0

50.0

50.9

57.0

1750

5.9

F-M8

197 (7.76)

165 (6.50)

172 (6.78)

14.8 (32.6)

DP-1260

47.5

53.9

60.0

61.0

68.3

1900

5.6

F-M8

350 (13.8)

168 (6.62)

178 (7.01)

18.0 (39.7)

DP-1270

55.5

63.0

70.0

71.1

79.6

2000

5.2

F-M8

350 (13.8)

168 (6.62)

178 (7.01)

22.0 (48.5)

DP-1280

63.5

72.0

80.0

81.1

91.2

2100

5.0

F-M8

259 (10.2)

168 (6.62)

215 (8.50)

23.0 (50.7)

DP-1290

71.3

80.8

90.0

90.9

101.0

2400

4.5

F-M8

259 (10.2)

168 (6.62)

215 (8.50)

26.5 (58.4)

DP-12100

79.0

90.4

100.0

102.0

114.0

2650

4.0

F-M8

305 (12.0)

168 (6.62)

215 (8.50)

30.0 (66.1)

DP-12110

86.9

98.7

110.0

113.0

126.0

2900

3.5

F-M8

305 (12.0)

168 (6.62)

215 (8.50)

31.5 (69.4)

DP-12120

96.4

108.0

120.0

123.0

138.0

3000

3.4

F-M8

332 (13.1)

174 (6.86)

220 (8.67)

33.0 (72.8)

DP-12135

107.0

121.0

135.0

137.0

153.0

3300

3.1

F-M8

408 (16.1)

175 (6.90)

230 (9.06)

35.0 (77.2)

DP-12150

119.0

134.0

150.0

152.0

170.0

3750

2.7

F-M8

340 (13.4)

173 (6.81)

288 (11.3)

39.6 (87.3)

DP-12165

131.0

148.0

165.0

167.0

187.0

4200

2.5

F-M8

480 (18.9)

170 (6.70)

240 (9.45)

45.0 (99.2)

DP-12180

142.0

162.0

180.0

183.0

205.0

4700

2.0

F-M8

530 (20.9)

209 (8.23)

220 (8.67)

54.0 (119.0)

DP-12200

158.0

180.0

200.0

204.0

228.0

5400

1.8

F-M8

520 (20.5)

238 (9.37)

220 (8.67)

60.5 (133.0)

DP-12230

181.0

206.0

230.0

233.0

260.0

5400

1.8

F-M8

520 (20.5)

238 (9.37)

220 (8.67)

64.0 (141.0)

DP-12250

197.0

225.0

250.0

253.0

283.0

5900

1.5

F-M8

520 (20.5)

269 (10.6)

210 (8.27)

66.5 (147.0)

DP-12280

220.0

252.0

280.0

283.0

317.0

6100

1.5

F-M8

520 (20.5)

269 (10.6)

210 (8.27)

69.5 (153.0)

DP-12300

236.0

270.0

300.0

303.0

340.0

6300

1.2

F-M8

520 (20.5)

269 (10.6)

225 (8.86)

76.0 (168.0)
View Complete Details
Ask Latest Price & Details
Modular Max VRLA Battery

Modular Max VRLA Battery
  • Voltage 2V
  • Ah Rating 150Ah to 3000Ah C10. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.8V.
  • Technology Valve Regulated Lead Acid (VRLA) with high-compression Absorbed Glass Mat (AGM) as separator
  • +ve Plate Flat pasted grid, 0.245” thick, made of Pb-Ca-Tin alloy, to minimize corrosion and prolong life
  • -ve Plate Flat pasted grid, made of Pb-Ca alloy, balanced to optimize recombination efficiency
  • Electrolyte Dilute sulphuric acid (Specific gravity = 1.3)
  • Separator Micro porous glass fibre, which is mechanically strong, has low electrical resistance, and absorbs the electrolyte completely into its structure
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Salient Features

  • Super thick +ve plates minimize corrosion and prolong life
  • Balanced lead-calcium -ve plates optimize recombination efficiency
  • Thermally welded case-to-cover bond for eliminating leakage
  • Single-piece container construction
  • Lead casting terminal, threaded copper insert with large surface area to provide maximum conductivity
  • Welded/epoxy, dual post sealed design provides the highest integrity seal in the industry
  • Large copper post design also enhances the high rate performance
  • Ring burn with secondary epoxy resin seal is 100% water bath tested in the factory and proven in service
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924

A The terminal voltage for all models is 2V.

B Ah rating is measured @ 25C with end voltage per cell (EVPC) = 1.75V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type.

F Actual dimensions may vary by 1%.

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C5

C8

C10

C12

C24

 

 

 

Length

Width

Height

Kg (lb)

2-150Max

135

152

158

161

175

1205

0.55

F-M8

90 (3.54)

181 (7.13)

365 (14.4)

12.5 (27.6)

2-200Max

180

202

210

214

233

1620

0.50

F-M8

90 (3.54)

181 (7.13)

365 (14.4)

13.7 (30.2)

2-300Max

269

304

313

319

348

2410

0.40

F-M8

124 (4.88)

181 (7.13)

365 (14.4)

19.2 (42.3)

2-400Max

359

405

420

425

466

3220

0.36

F-M6

158 (6.22)

181 (7.13)

365 (14.4)

25.0 (55.1)

2-500Max

449

506

522

533

581

4100

0.30

F-M8

191 (7.52)

181 (7.13)

365 (14.4)

30.5 (67.2)

2-600Max

540

607

626

638

698

4860

0.28

F-M8

225 (8.86)

181 (7.13)

365 (14.4)

35.5 (78.3)

2-800Max

720

810

835

852

931

6400

0.20

F-M8

303 (11.9)

181 (7.13)

365 (14.4)

48.0 (106.0)

2-1000Max

897

1012

1040

1064

1164

7900

0.16

F-M8

370 (14.6)

181 (7.13)

365 (14.4)

61.0 (134.0)

2-1600Max

1435

1616

1660

1704

1855

13200

0.11

F-M8

318 (12.5)

363 (14.3)

388 (15.3)

100.0 (220.0)

2-2000Max

1795

2024

2090

2124

2326

16200

0.09

F-M8

385 (15.2)

363 (14.3)

388 (15.3)

125.0 (276.0)

2-3000Max

2690

3040

3130

3192

3480

24200

0.08

F-M8

568 (22.4)

363 (14.3)

388 (15.3)

185.0 (408.0)
View Complete Details
Ask Latest Price & Details
Modular VRLA Gel Battery

Modular VRLA Gel Battery
  • Voltage 2V
  • Ah Rating 50Ah to 4000Ah C10. Ah rating is @25°C, with end voltage per cell (EVPC) = 1.80V.
  • Technology Valve Regulated Lead Acid (VRLA) with sulphuric acid thixotropic gel (specific gravity = 1.28) as separator
  • +ve Plate Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance
  • -ve Plate Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance
  • Electrolyte Dilute sulfuric acid
  • Separator Micro porous and robust, for electrical separation of the +ve and -ve plates, and optimized for low internal resistance
  • Container Standard: Reinforced ABS (UL94HB) container and cover Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%
Salient Features

  • Advanced Pb-Ca-Tnalloy which reduces grid corrosion and increases battery life
  • Thick +ve plate technology for maximum service float life and a design life of 18 years @ 20C
  • Separator manufactured using the latest German technology
  • Base material is a microporousduroplastic exhibiting excellent high temperature stability and mechanical strength, resulting in very good resistance to vibration and mechanical shock
  • Silver plated integral copper insert
  • Operation at a low internal pressure
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924

Cenergy MaxPower Energy Storage & Solar Products Energy Storage Products VRLA Batteries VRLA Gel Batteries Modular VRLA Gel Battery
Modular VRLA Gel Battery

Brochure

Download the brochure for this product.

FAQs

Read the FAQs related to this product.

Contact Sales

Contact the sales team to buy this product.

Overview

Voltage

2V

Ah Rating

50Ah to 4000Ah C10. Ah rating is @25C, with end voltage per cell (EVPC) = 1.80V.

Technology

Valve Regulated Lead Acid (VRLA) with sulphuric acid thixotropic gel (specific gravity = 1.28) as separator

+ve Plate

Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance

-ve Plate

Flat pasted grid, made of Pb-Ca-Tin-Al alloy, optimized for high corrosion resistance

Electrolyte

Dilute sulfuric acid

Separator

Micro porous and robust, for electrical separation of the +ve and -ve plates, and optimized for low internal resistance

Container

Standard: Reinforced ABS (UL94HB) container and cover

Optional: Flame-retardant reinforced ABS container and cover compliant with U.L.94 V-0 with an oxygen limiting index of more than 28%

Salient Features

  • Advanced Pb-Ca-Tnalloy which reduces grid corrosion and increases battery life
  • Thick +ve plate technology for maximum service float life and a design life of 18 years @ 20C
  • Separator manufactured using the latest German technology
  • Base material is a microporousduroplastic exhibiting excellent high temperature stability and mechanical strength, resulting in very good resistance to vibration and mechanical shock
  • Silver plated integral copper insert
  • Operation at a low internal pressure
  • Flame-arresting, low-pressure safety release venting system for individual cells, recognized as per U.L.924

Product Specifications

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

C5

C10

C24

C48

C100

Length

Width

Height

Kg (lb)

2-50

42

50

56

58

62

420

2.10

ST1

161 (6.34)

50 (1.97)

172 (6.78)

4.5 (9.9)

2-100

84

100

111

115

123

890

2.00

ST1

171 (6.74)

72 (2.83)

211 (8.31)

8 (17.6)

2-120

101

120

134

138

148

150

1.80

ST1

171 (6.74)

72 (2.83)

211 (8.31)

9 (19.8)

2-150

126

150

167

172

185

1280

1.50

ST1

171 (6.74)

102 (4.02)

211 (8.31)

11 (24.3)

2-200

168

200

223

230

246

1320

0.50

ST2

171 (6.74)

106 (4.18)

336 (13.2)

15 (33.1)

2-250

210

250

278

288

308

1660

0.45

ST2

171 (6.74)

106 (4.18)

336 (13.2)

18 (39.7)

2-300

252

300

336

345

369

1990

0.40

ST2

171 (6.74)

151 (5.95)

336 (13.2)

21 (46.2)

2-400

336

400

446

460

500

2660

0.36

ST2

210 (8.27)

173 (6.82)

336 (13.2)

28 (61.7)

2-500

420

500

559

576

615

3320

0.30

ST2

241 (9.50)

171 (6.74)

336 (13.2)

33 (72.8)

2-600

505

600

672

691

738

3980

0.28

ST2

302 (11.9)

175 (6.90)

336 (13.2)

42 (92.6)

2-700

590

660

720

806

861

4850

0.22

ST2

302 (11.9)

175 (6.90)

336 (13.2)

50 (110)

2-800

670

800

890

922

984

5300

0.20

ST2

410 (16.2)

175 (6.90)

336 (13.2)

57 (126)

2-1000

840

1000

1114

1152

1230

6550

0.16

ST2

482 (19.0)

175 (6.90)

336 (13.2)

66 (146)

2-1250

1052

1250

1393

1440

1542

8200

0.13

ST2

482 (19.0)

175 (6.90)

336 (13.2)

70 (154)

2-1500

1260

1500

1670

1723

1850

9920

0.11

ST2

400 (15.8)

350 (13.8)

351 (13.8)

100 (220)

2-1800

1510

1800

2004

2069

2220

12300

0.10

ST2

490 (19.3)

350 (13.8)

351 (13.8)

120 (265)

2-2000

1680

2000

2227

2299

2460

13400

0.09

ST2

490 (19.3)

350 (13.8)

351 (13.8)

132 (291)

2-2500

2100

2500

2784

2875

3080

16540

0.08

ST2

490 (19.3)

350 (13.8)

351 (13.8)

175 (386)

2-3000

2520

3000

3336

3451

3690

19980

0.08

ST2

710 (27.2)

350 (13.8)

351 (13.8)

210 (463)

2-4000

3360

4000

4464

4598

4920

27500

0.06

ST2

710 (27.2)

350 (13.8)

351 (13.8)

261 (576)

A The terminal voltage for all models is 2V.

B Ah rating is measured @ 25C with end voltage per cell (EVPC) = 1.80V. The actual battery performance may be 5% of the figures shown above.

C SCC means Short Circuit Current and its unit is Amperes.

D IR means Internal Resistance and its unit is milli-ohms.

E TT means Terminal Type.

F Actual dimensions may vary by 1%.

ModelA

Ah RatingB

SCCC

IRD

TTE

DimensionsF (mm/inch)

Weight

 

C5

C10

C24

C48

C100

 

 

 

Length

Width

Height

Kg (lb)

2-50

42

50

56

58

62

420

2.10

ST1

161 (6.34)

50 (1.97)

172 (6.78)

4.5 (9.9)

2-100

84

100

111

115

123

890

2.00

ST1

171 (6.74)

72 (2.83)

211 (8.31)

8 (17.6)

2-120

101

120

134

138

148

150

1.80

ST1

171 (6.74)

72 (2.83)

211 (8.31)

9 (19.8)

2-150

126

150

167

172

185

1280

1.50

ST1

171 (6.74)

102 (4.02)

211 (8.31)

11 (24.3)

2-200

168

200

223

230

246

1320

0.50

ST2

171 (6.74)

106 (4.18)

336 (13.2)

15 (33.1)

2-250

210

250

278

288

308

1660

0.45

ST2

171 (6.74)

106 (4.18)

336 (13.2)

18 (39.7)

2-300

252

300

336

345

369

1990

0.40

ST2

171 (6.74)

151 (5.95)

336 (13.2)

21 (46.2)

2-400

336

400

446

460

500

2660

0.36

ST2

210 (8.27)

173 (6.82)

336 (13.2)

28 (61.7)

2-500

420

500

559

576

615

3320

0.30

ST2

241 (9.50)

171 (6.74)

336 (13.2)

33 (72.8)

2-600

505

600

672

691

738

3980

0.28

ST2

302 (11.9)

175 (6.90)

336 (13.2)

42 (92.6)

2-700

590

660

720

806

861

4850

0.22

ST2

302 (11.9)

175 (6.90)

336 (13.2)

50 (110)

2-800

670

800

890

922

984

5300

0.20

ST2

410 (16.2)

175 (6.90)

336 (13.2)

57 (126)

2-1000

840

1000

1114

1152

1230

6550

0.16

ST2

482 (19.0)

175 (6.90)

336 (13.2)

66 (146)

2-1250

1052

1250

1393

1440

1542

8200

0.13

ST2

482 (19.0)

175 (6.90)

336 (13.2)

70 (154)

2-1500

1260

1500

1670

1723

1850

9920

0.11

ST2

400 (15.8)

350 (13.8)

351 (13.8)

100 (220)

2-1800

1510

1800

2004

2069

2220

12300

0.10

ST2

490 (19.3)

350 (13.8)

351 (13.8)

120 (265)

2-2000

1680

2000

2227

2299

2460

13400

0.09

ST2

490 (19.3)

350 (13.8)

351 (13.8)

132 (291)

2-2500

2100

2500

2784

2875

3080

16540

0.08

ST2

490 (19.3)

350 (13.8)

351 (13.8)

175 (386)

2-3000

2520

3000

3336

3451

3690

19980

0.08

ST2

710 (27.2)

350 (13.8)

351 (13.8)

210 (463)

2-4000

3360

4000

4464

4598

4920

27500

0.06

ST2

710 (27.2)

350 (13.8)

351 (13.8)

261 (576)
View Complete Details
Ask Latest Price & Details
Tubular Eco Battery

Tubular Eco Battery
  • Technology Flooded lead acid with diluted sulphuric acid as electrolyte (dN = 1.25 kg/l)
  • +ve Plate Type Tubular, made of low-antimony lead selenium alloy
  • -ve Plate Type Flat, made of lead selenium alloy
  • Container Standard: Reinforced PP Optional: Flame retardant
  • Voltage Level 6V, 12V
  • AH rating 180 Ah to 280 Ah @ C20 for 6V 28 Ah to 300 Ah @ C20 for 12V
  • Applicable Operating Temperature Range -40˚C (-104˚F) to +60˚C (+140˚F)
  • Ideal Operating Temperature Range +20˚C (+68˚F) to +25˚C (+77˚F)
  • Storage time from a fully charged condition 12 months @ +20˚C (+68˚F). At higher temperatures, the time interval is shorter.

Tubular OPzS Eco flooded lead acid batteries are distinguished by their economical design, lead selenium tubular plate design, and their high tolerance to cycling. They provide the best possible compromise in lead acid plate technology. They can be used for general purpose applications, but can also be used for solar/wind and other deep discharge applications.

Salient Features

  • Robust tubular +ve plates consisting of a low-antimony lead selenium alloy
  • Microporous, corrugated, and robust separators for electrical separation of the +ve and ve plates, optimized for low internal resistance
  • Very high operational reliability in rough operating conditions
  • Low maintenance due to reduced antimony in the alloy and high electrolyte reserve
  • Flame retardant ceramic plugs that filter out any drops of electrolyte from the escaping gases preventing any errant spark or flame from entering the battery
  • Low gassing due to PbSbSnSe alloy (en 50272-2)
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.